• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.24-28
• /
• 2010

Since the reaction of mineral fixation proceeds with a very slow rate, the pretreatment method to increases the rate of carbonation reaction should be required. To increase the reactivity of serpentine with $CO_{2}$, two pretreatment methods are performed in this study. The heat treatment is done at $630^{\circ}C$. A heat-treated serpentine shows that the strength of -OH has a lower peak in FT-IR spectrum. Chemical pretreatment is the method of leaching of magnesium from serpentine using sulfuric acid at $75^{\circ}C$ for 1 h. Because the protonation of the oxygen atoms polarizes and weakens the Mg-O-Si bond, the removal of magnesium atoms from the crystal lattice was facilitated. After performing the pre-treatment of serpentine, $CO_{2}$ fixation experiments are performed with treated serpentine in the batch reactor. Heat-treated serpentine is converted into 43% magnesite conversion, whereas untreated serpentine has 27% of magnesite conversion. Although the results of the heat-pretreatment are encouraging, this method is prohibited due to excessive energy consumption. Furthermore chemical pretreatment serpentine routes have been proposed in an effort to avoid the cost prohibitive heat pretreatment, in which the carbonation reaction was conducted at 45 atm and $25^{\circ}C$. Chemical-treated serpentine, in particularly is corresponded to a conversion of 42% of magnesite compared to 24% for the un-treated serpentine.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.526-532
• /
• 2008

The proposed $CO_2$ storage technology in the present study is a one-step sequestration process that stabilizes $CO_2$ in a reactor with Serpentine. The advantage of this technology is associated with its high stability of final product so that the entire system is recognized as permanent environment-friendly $CO_2$ removal method. Since the sequestration reaction mechanisms are generally understood that carbonation reaction proceeds with very slow rate, so that pretreatment method to increases reaction rate of $CO_2$ carbonation reaction should be developed. To increase the reactivity of Serpentine with $CO_2$, two different methods of pretreatment are carried out in the present investigation. One is heat-treatment, the other is chemical pretreatment. In this study, only chemical pretreatment is considered leaching method of magnesium from Serpentine using sulfuric acid at the various reaction temperatures, times, and acid concentrations. Experimental results illustrated that pretreatment by sulfuric acid increases surface area of serpentine from $11.1209m^2/g$ to $98.7903m^2/g$ and extracts magnesium compounds. Single variable experiment demonstrated the enhancements of magnesium extraction with increased reaction temperature and time. Amount of magnesium extraction is obtained by using the data of ICP-AES as maximum extraction condition of magnesium is 2 M acid solution, $75^{\circ}C$ and 1hr. After performing chemical pretreatment, carbonation yield increased from 23.24% to 46.30% of weight.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.3
• /
• pp.259-268
• /
• 2012

This paper aims to estimate the carbon dioxide stocks in forests using airborne LiDAR data with a density of approximate 4.4 points per meter square. To achieve this goal, a processing chain consisting of bare earth Digital Terrain Model(DTM) extraction and individual tree top detection has been developed. As results of this experiment, the reliable DTM with type-II errors of 3.32% and tree positions with overall accuracy of 66.26% were extracted in the study area. The total estimated carbon dioxide stocks in the study area using extracted 3-D forests structures well suited with the traditional method by field measurements upto 7.2% error level. This results showed that LiDAR technology is highly valuable for replacing the existing forest resources inventory.

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.363-369
• /
• 2018

One of the recent environmental problems is climate change due to the increase of atmospheric $CO_2$, which causes ecological changes and various environmental problems. Therefore, various studies are being carried out to reduce $CO_2$ in the world in order to solve various environmental problems caused by increase of $CO_2$. The $CO_2$ reduction using microalgae is an environmentally friendly method by using photosynthesis reaction of microalgae. However, most studies using single species. There is no study on the $CO_2$ fixing efficiency of microalgae in natural rivers. Therefore, this study was to identify the microalgae in the Sum river and to analyze the growth characteristics of microalgae in the river to obtain optimal culture conditions. And the changes of biomass and chlorophyll-a of microalgae were analyzed according to $CO_2$ concentration and injection rate. The purpose of this study was to investigate the fixing efficiency of carbon dioxide in microalgae in natural rivers. Six kinds of dominant species were observed as a result of the identification of microalgae in Sum river(Ankistrodesmus falcatus, Scenedesmus intermedius, Selenodictyum sp., Xanthidium apiculatum var. laeve, Cosmarium pseudoquinarium, Dictyosphaerium pulchellum). All of these species were green algae. Biomass and chlorophyll-a increased with the increase of $CO_2$ concentration and biomass and chlorophyll-a increased faster flow rate at the same $CO_2$ concentration. Also, the quantity of $CO_2$ fixation on the microalgae tended to be higher when the flow rate of injected gas was faster. This study can be referred as being significant in the micro-algae in river. In addition, the optimal conditions for $CO_2$ fixation of microalgae in rivers and the quantification of the quantity of $CO_2$ fixation from microalgae in rivers can be used as basic data for future policy of $CO_2$ reduction.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.506-507
• /
• 2003

전 세계적으로 이산화탄소를 저감하기 위한 연구활동이 활발히 진행중이나 현재까지는 산업생산성에 영향을 미치지 않을 정도로 경제적인 이산화탄소 저감법은 개발이 되지 않은 실정이다. 미국, 일본 등 선진국을 중심으로 각국별 사정에 맞는 이산화탄소 저감법을 연구중인데, 대표적인 기술로는 흡수법, 흡착법, 생물학적 고정화, 막분리법, 심냉법, 산소연소법 등이 있다. 각 기술별로 장·단점이 있지만 배출되는 이산화탄소 중 보다 많은 양을 줄이기 위해서는 발전소, 철강업 그리고 시멘트업 등과 같은 대규모 발생원에서 발생되는 배기가스 중 함유된 이산화탄소를 저감하는 것이 효율적이다.(중략)

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.272-277
• /
• 2010

To replace current expensive photobioreactor, this study was conducted to develop low-cost photobioreactor made of polyethylene bag. In previous study, optimal culture conditions of Spirulina platensis NIES 39 have been established, and based on these, the study of biological carbon dioxide fixation has been conducted. The maximum growth was the biomass 2.677 g/L at conditions of 10% $CO_2$, 0.1 vvm. It was shown that $F_{CO_2}$ was 4.056 g $CO_2$/L and $R_{CO_2}$ was 0.312 g $CO_2$/L/day. But, compared with the data at conditions of 5% $CO_2$, 0.1 vvm, $FE_{CO_2}$ was shown 52.372% which is half of it. Regarding the effect of $CO_2$ following illumination, the growth revealed that the input conditions, for 10 min per 3 h, were excellent in the light. $CO_2$ in absent light. $CO_2$ concentration and flow rate were 5% $CO_2$, 0.1 vvm, respectively. Finally, the addition of $CO_2$ was ineffective in the absence of light.

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.347-354
• /
• 2013

This study was carried out to examine different mole ratio of $H_2/CO_2$ and EBCT using the continuous system in the lab scale throughout biological methods with accumulated hydrogenotrophic methanogen that can convert $CO_2$ to $CH_4$. The experimental-based results with various gas mixtures of mole ratio of 4:1($H_2/CO_2$) and 5:1($H_2/CO_2$), $H_2$ was converted more than 99% conversion rate. In case of $CO_2$, 4:1($H_2/CO_2$) and 5:1($H_2/CO_2$) were $74.45{\pm}0.33%$, $95.8{\pm}10.7%$, respectively, in addition, the study was confirmed that the amount of $H_2$ was more needed than stoichiometric equations, where approach methods are empirical versus theoretical frameworks, for converting total $CO_2$. As such, we have noticed that $H_2$ was used for energy source of hydrogenotrophic methanogen for maintaining life. Regarding the results of the ratio of treatment by retention time, limitation of treatment capacity showed that $H_2$(99.9%) and $CO_2$(96.23%) at EBCT 3.3 hrs indicated stable conversion ratio, as well as appeared that methane production rate and $CO_2$ fixation rate were investigated $1.15{\pm}0.02m^3{\cdot}m^{-3}{\cdot}day^{-1}$ and $2.01{\pm}0.04kg{\cdot}m^{-3}{\cdot}day^{-1}$, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.11
• /
• pp.11-17
• /
• 2012

This study focused on application of various $CO_2$ philic adsorbents with amine to improve $CO_2$ uptake in mortar. TGA, phenolphthalein method, FT-IR XRD, and FE-SEM analysis methods were used to evaluate $CO_2$ capture in mortar. When $CO_2$ philic adsorbents was used, $CO_2$absorption efficiency was improved maximum of 58.5%. Carbonation depth was increased 3 times compared with original mortar. Chemical reactions between bicarbonate ion, $CO_2$, $CO_2$ philic adsorbents aqueous solution, and $Ca^{2+}$ ions dissolved from cement formed $CaCO_3$ in the mortar. Therefore, impregnation of the $CO_2$ philic adsorbent on the surface of the mortar can increase the adsorbed $CO_2$.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.158-161
• /
• 2003

To develop an effective adsorbent for radio active Carbon Dioxide, $^14CO_2$, which is discharged to nearby atmosphere from nuclear power plants of CANDU type, we made some preliminary adsorbents and tested their abilities of $CO_2$ removal. The chemical agents used was LiOH and we supported or impregnated it on the surface or the internal volume of activated Carbon(GW-H). The physical and chemical properties of various adsorbents were measured using methods such as XRD, BET. SEM images were taken to investigate the change of surface morphology of the adsorbents. Finally, amount of $CO_2$ adsorption of them were verified under specific conditions. We found that mechanical mixing of LiOH and activated Carbon showed the maximum $CO_2$ removal ability, while surface activation of activated Carbon by Nitric Acid-treatment enhanced its $CO_2$ removal efficiency to some degree.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.63-68
• /
• 2018

This paper presents an integrated photochemical reaction system (i.e., an artificial leaf) that uses earth-abundant catalysts for artificial photosynthesis with a carbon dioxide ($CO_2$) fixation process. The performance of the system was investigated in terms of the energy capture and conversion capabilities. A wireless configuration was achieved by directly doping cobalt oxide as an oxygen-evolving catalyst for water splitting reaction on the illuminated surface of photovoltaic (PV) cell, as well as molybdenum disulfide ($MoS_2$) as an efficient catalyst for $CO_2$ reduction on the back substrate surfaces of the PV cell. The system produces hydrogen and carbon monoxide (CO) as sustainable fuels (i.e., synthesis gas) at around 4.5% efficiency, which implies more than 75% catalytic efficiency at the cathode. The process of solar-driven $CO_2$ conversion and water-splitting reaction is contained in one system, which is one step closer to the successful realization of artificial photosynthesis.