• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.884-894
• /
• 2013

In this paper, we investigate the characteristics of power amplifiers and simplified memoryless non-linear power amplifier models for energy efficient communication system. First, we present the transfer function of GaAs FET (Gallium Arsenide Field Effect Transistor) that is widely used for high power amplifier. From those investigations, we introduce the instantaneous efficiencies and methods of amplification by assuming that the saturated current is constant, while perfect linearity is exploited under knee voltage. Then, we discuss four non-linear power amplifier models in a baseband signal processing. Finally, we explain the specified total power consumption model in a base station to achieve the resonable analysis for energy efficient communication.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.134-141
• /
• 2017

Many studies have been conducted with respect to the materials to replace the cement in order to reduce the carbon dioxide emissions during the cement production. Activated hwangtoh as cement replacement material goes through calcination process of $850^{\circ}C$. PVA fibers and GFRP bars are used in order to compensate for the cracks of activated hwangtoh concrete(AHC). This paper presents an experimental study investigating the bond characteristic of GFRP bars in PVA fiber reinforced AHC under tensile loads. Experimental results showed that average bond strength factor of specimens with and without PVA fiber was 2.27~2.48 and was not significantly affected by the ratio of PVA fiber andactivated hwangtoh. In addition, as the bond length was increased, the bond strength was reduced.

• Journal of Korean Society on Water Environment
• /
• v.32 no.5
• /
• pp.433-441
• /
• 2016

Many large dams have been constructed for water supply, irrigation, flood control and hydropower in Korea for the last century. Meanwhile, recent studies indicated that the artificial reservoirs impounded by these dams are major sources of carbon dioxide (CO₂) to the atmosphere and relevant to global budget of green house gases. However, limited information is available on the seasonal variations of CO₂ evasion from the reservoirs located in the temperate monsoon regions including Korea. The objectives of this study were to estimate daily Net Atmospheric Flux (NAF) of CO₂ in Daecheong Reservoir located in Geum River basin of Korea, and analyze the influencing parameters that characterize the variation of NAF. Daily pH and alkalinity (Alk) data collected in wet year (2012) and dry year (2013) were used for estimating the NAFs in the reservoir. The dissolved inorganic carbon (DIC) was computed using the pH and Alk measurements supposing an equilibrium state among the carbonate species. The results showed seasonal variations of NAF; negative NAFs from May to October when the primary production of the reservoir increased with water temperature increase, while positive NAF for the rest of the period. Overall the reservoir acted as sources of CO₂ to the atmosphere. The estimated NAFs were 2,590 and 771 mg CO₂ m^-2d^-1 in 2012 and 2013, respectively, indicating that the NAFs vary a large extent for different hydrological years. Statistical analysis indicated that the NAFs are negatively correlated to pH, water temperature, and Chl-a concentration of the reservoir.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.5
• /
• pp.153-160
• /
• 2020

Energy Consumption Predictions for Industries has a prominent role to play in the energy management and control system as dynamic and seasonal changes are occurring in energy demand and supply. This paper introduces and explores the steel industry's predictive models of energy consumption. The data used includes lagging and leading reactive power lagging and leading current variable, emission of carbon dioxide (tCO2) and load type. Four statistical models are trained and tested in the test set: (a) Linear Regression (LR), (b) Radial Kernel Support Vector Machine (SVM RBF), (c) Gradient Boosting Machine (GBM), and (d) Random Forest (RF). Root Mean Squared Error (RMSE), Mean Absolute Error (MAE) and Mean Absolute Percentage Error (MAPE) are used for calculating regression model predictive performance. When using all the predictors, the best model RF can provide RMSE value 7.33 in the test set.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.415-416
• /
• 2011

As the has been brought out in 1997, many ports pay attention to greenhouse gas emission reduction and try to develop the port as an Green Port. The purpose of this paper is to establish the activities priority for Green Port construction and analysis its efficiency for the port competition. First of all, the activities for Green Port is introduced and showed its characteristics. To analysis these effectiveness for Green Port, the questionnaire survey is done by considering the opinion of port specialists. And by using AHP analysis method, the priority between the port activities is obtained and its effect for Green Port is taken by considering port competitiveness.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.2
• /
• pp.161-167
• /
• 2015

Nowadays, all the world face to the global warming problems due to the emission of $CO_2$. From the previous studies, recycled aggregates were used as an alkali activator in blast furnace slag to achieve zero-cement concrete, and favorable results of obtaining strength were achieved. In this study, gypsum and incineration waste ash were used as the additional alkali activation and effects of the gypsum and incineration waste ash to enhance the performance of the mortar were tested. Results showed that although the replacement ratio of 0.5% of incineration waste ash and 20% of anhydrous gypsum resulted in the low of mortar at the early age, while it improved the later strength and achieved the similar strength to that of conventional mortar (at 91 days).

• Journal of Korea Port Economic Association
• /
• v.26 no.2
• /
• pp.36-48
• /
• 2010

This primary purpose of this study is to suggest strategy a green-logistics strategy of Gwanyang bay area. The Green growth is the new growth concept based on the low carbon and environment-friendly industry. The new paradigm on the global economy growth requests a established logistics industry to be shifted into establishing the environment-friendly green logistics system. Some findings derided from this study are follows: Frist, in order to establish a environment-friendly green growth foundation, it is necessary to attract a green industry such as solar cell, wind force, hybrid car etc. Second, a green logistics system has to be established, including a green port strategy and reducing emission of carbon.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.3-15
• /
• 2011

Current, Registration fields of CDM projects are being conducted in a variety of parts such as mostly energy, chemical processing and manufacturing processes. However, there are not many CDM project registrations by recycling of inorganic waste. In this paper, analysis abroad CDM project and applications in order to review possibility of CDM project registration through the recycling of domestic inorganic waste were investigated. As a results, registered case of CDM project by inorganic waste recycling was researched to registrate in raw material alternative field of cement industry that inorganic waste can be used in large quantities. Application prospects of CDM project in Korea will be possible to analysis industrial scale, industry using inorganic raw materials, green house gas emissions and inorganic waste generated in large quantities.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.163-173
• /
• 2015

In this paper, it shows optimal inventory level of bicycle sharing service terminal by maintaining the lowest costs. As the interest to environment and exhaustion of resource increases globally, investment to sustainable transportation increases around advanced countries and interest to efficient transportation, managing and consuming of vehicle increases also. Vehicle sharing service is a model of rental car where customer rent cars for short periods of time often by the hour and its users are increasing for the reason that it is more convenient than car rent. In addition, bicycle sharing service is one of the major parts in vehicle sharing program and many of country are already managing it. This paper proposes optimal inventory levels of vehicle sharing service's terminal by using simulation calculating operation costs of vehicle sharing service.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2019

The reduction of nitrogen to produce ammonia has been attracting much attention as a renewable energy technology. Ammonia is the basis for many fertilizers and is also considered an energy carrier that can power internal combustion engines, diesel engines, gas turbines, and fuel cells. Traditionally, ammonia has been produced through the Haber-Bosch process, in which atmospheric nitrogen combines with hydrogen at high temperature ($350-550^{\circ}C$) and high pressure (150-300 bar). This process consumes 1-2% of current global energy production and relies on fossil fuels as an energy source. Reducing the energy input required for this process will reduce $CO_2$ emissions and the corresponding environmental impact. For this reason, developing electrochemical ammonia-production methods under ambient temperature and pressure conditions should significantly reduce the energy input required to produce ammonia. In this review, we introduce the electrochemical nitrogen reduction reaction at ambient condition. Numerical studies on the electrochemical nitrogen reduction mechanism have been carried out through the computation of density function theory. Electrodes such as nanowires and porous electrodes have been also actively studied for further participation in electrochemical reactions.