• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.7-12
• /
• 2007

In this paper, we introduce an approach to design multi-fuzzy controllers for the superheat and the low pressure that have an influence on energy efficiency and stabilization of aft conditioning system. Air conditioning system is composed of compressor, condenser several evaporators and several expansion valves. It is quite difficult to control the air conditioning system because the change of the refrigerant condition give an impact on the overall air conditioning system. In order to solve the drawback, we design multi-fuzzy controllers which control simultaneously both three expansion valve and one compressor for the superheat and the low pressure of air conditioning system. The proposed multi fuzzy controllers are given as two kinds of controller types such as a continuous simplified fuzzy inference type and a discrete fuzzy lookup_table type. Here the scaling factors of each fuzzy controller ate efficiently adjusted by veal coding type Genetic Algorithms. The values of performance index of the conventional type are compared with the simulation results of discrete lookup_table type and continuous simplified inference type.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.338-339
• /
• 2018

최근 분산전원 시스템 개발로 인해 계통연계 인버터의 사용이 증가해 왔다. 계통연계 인버터의 주요한 역할은 계통연계 환경에서의 안정적인 운전과 계통 사고 시 중요 부하에 대한 연속적인 전력을 공급하기 위한 독립운전에 있다. 각 모드 전환시의 출력전압의 변동성과 과도응답 특성을 개선하기 위해 최근 다중 루프 및 간접 전류 제어 방식이 계통연계 인버터에 적용되었다. 하지만 이러한 제어 방식은 캐패시터 전압 및 인버터 전류의 측정이 요구되어 시스템의 비용 및 복잡성을 증가시키게 된다. 본 논문에서는 이산시간 상태공간에서의 전상태 관측기를 설계하여 무순단 절체 동작 시 제어기가 요구하는 변수를 추정하고 이를 궤환신호로 사용하여 시스템의 설계 비용 및 복잡성을 줄인다. 또한 계통연계 시 계통유입 고조파 전류를 억제하기 위해 일반적으로 사용되는 기존 공진형 제어기의 과도 응답을 개선하기 위해 이산시간에서 슬라이딩 모드와 공진제어기가 결합된 새로운 제어기 구조를 제안한다. 제안된 기법의 타당성은 PSIM 시뮬레이션을 통하여 입증된다.

• Journal of the Korea Society for Simulation
• /
• v.15 no.2
• /
• pp.1-12
• /
• 2006

As the needs of intelligent systems increase, there have been diverse approaches that combine artificial intelligence (AI) and simulation in the last decade. RG-DEVS, which is the basis for this paper, embedded AI planning techniques into the simulation modeling methodology of DEVS, in order to specify dynamically a simulation model. However, a hierarchy concept, which is used for various types of problem solving systems. is not included in the planning of RG-DEVS. The hierarchy concept reduces the computational cost of planning by reducing the search space, and also makes it easy to apply the hierarchical process flow of a target system to planning. This paper proposes Hierarchical RG-DEVS (HRG-DEVS) in an attempt to insert hierarchical planning capability into RG-DEVS. For the verification of the proposed modeling methodology, HRG-DEVS is applied to model the block's world problem of ABSTRIPS, which is a classical planning problem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.4
• /
• pp.352-359
• /
• 1988

A learning control system which should have memory elements can be designed by utilizing the concept of parameter adaptation for unknown control object system parameters and regard it as a hybrid adaptive control system. A parameter adaptive learning control system applicable to a continuous time system has been already reported. Since there have been rapid developments in digital technology, it is possible to extend a continuous time parameter adaptive learning control system concept to a discrete time case. This problem is treated in this paper. Its justfication is proved and a simulation shows that this algorithms is effective.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.4
• /
• pp.633-649
• /
• 1996

An interactive multicriteria method, which is called the Modified Pairwise Comparison Stochastic Cutting Plane (MPCSCP) method, is proposed for determining the best levels of the integer decision variables needed to optimize a stochastic computer simulation with multiple response functions. MPCSCP combines good features from interactive tradeoff cutting plane methods and response surface methodologies. The proposed method uses a simple pairwise man-machine interaction and searches an integer space uniformly by using the experimental design which evaluates the decision space centering around an integer center point. The characteristics of the proposed method are investigated through an extensive computational study. The parameter configurations examined in the study are (1) variability of the sampling errors, (2) the size of experimental design, (3) the relaxation of cutting planes, and (4) the levels of decision maker's inconsistency.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.63-69
• /
• 1999

The research trend of the simulation optimization has been focused on exploring continuous decision variables. Yet, the research in discrete decision variable area has not been fully studied. A new research trend for optimizing discrete decision variables ha just appeared recently. This study, therefore, deals with a discrete simulation method to get the system evaluation criteria required for designing a complex probabilistic discrete event system and to search the effective and reliable alternatives to satisfy the objective values of the given system through a on-line, single run with the short time period. Finding the alternative, we construct an algorithm which changes values of decision variables and a design alternative by using the stopping algorithm which ends the simulation in a steady state of system. To avoid the loss of data while analyzing the acquired design alternative in the steady state, we provide background for estimation of an auto-regressive model and mean and confidence interval for evaluating correctly the objective function obtained by small amount of output data through simulation with the short time period. In numerical experiment we applied the proposed algorithm to (s, S) inventory system problem with varying Δt value. In case of the (s, S) inventory system, we obtained good design alternative when Δt value is larger than 100.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.11-12
• /
• 2015

본 논문은 LCL 필터를 사용하는 계통연계형 인버터의 안정적인 전류제어를 위한 공진주파수와 샘플링주파수의 관계 분석을 통해 주파수 및 이산시간영역에서 전류제어 안정도를 해석, 시뮬레이션 및 실험을 통해 검증하였다. 능동댐핑을 포함하지 않는 계통전류 제어의 경우, 공진주파수가 샘플링주파수의 1/6이 되는 $f_{base}$보다 높은 영역에 위치하면 안정, 낮은 영역에 위치하면 불안정한 특성을 분석하였고, 공진주파수 변화에 따른 전류제어루프의 안정도 해석을 기반으로 7kW 계통연계형 인버터 Psim 시뮬레이션 및 실험을 통해 동일한 결과를 도출함으로써 주파수간의 관계 분석 및 안정도 해석의 타당성을 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.116-124
• /
• 2009

This paper proposes a new Artificial-Intelligent(AI) Power Quality(PQ) diagnosis algorithm using Discrete Wavelet Transform(DWT), Fast Fourier Transform(FFT), Root-Mean-Square(RMS) value. The developed algorithm is able to detect and classify the PQ problems such as the transient, the voltage sag, the voltage swell, the voltage interruption and the total harmonics distortion. The 15.36[kHz] sampling frequency is used to measure the voltages in a power system. The measured signals are used for DWT, FFT, RMS calculation. For AI diagnosis of the PQ problems, a simple multi-layered Artificial Neural Network(ANN) with the back-propagation algorithm is adopted, programmed in C++ and tested in PSIM simulation studies. Finally, the algorithm, which is installed in MP PQ+256 with TI DSP320C6713, is proved to diagnose the PQ problems efficiently.

• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.45-54
• /
• 2010

The inherent complexity of semiconductor fabrication processes makes it hard to solve well-known job scheduling problems in analytical ways, which leads us to rely practically on discrete event modeling simulations to learn the effects of changing the system's parameters. Meanwhile, unpredictable disturbances such as machine failures and maintenance diminish the productivity of semiconductor manufacturing processes with fixed scheduling policies; thus, it is necessary to adapt job scheduling policy in a timely manner in reaction to critical environmental changes (disturbances) in order for the fabrication process to perform optimally. This paper proposes an adaptive job control framework for a wafer fabrication process in a control system theoretical approach and implements it based on a DEVS modeling simulation environment. The proposed framework has the advantages in view of the whole systems understanding and flexibility of applying new rules compared to most ad-hoc software approaches in this field. Furthermore, it is flexible enough to incorporate new job scheduling rules into the existing rule set. Experimental results show that this control framework with adaptive rescheduling outperforms fixed job scheduling algorithms.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.4
• /
• pp.279-288
• /
• 2010

In this paper, a DEVS(Discrete EVent Systems Specification)-HLA(High Level Architecture) interface was developed in order to perform the simulation using the combined discrete event and discrete time simulation model architecture in a distributed environment. The developed interface connects the combined simulation model with the HLA/RTI(Run-Time Infrastructure) which is an international standard middleware for distributed simulation. The interface consists of an interface model, a model interpreter, and a distributed environment interpreter. The interface model was defined by using the combined simulation architecture in order to easily connect the existing combined simulation model without modification with the HLA/RTI. The model interpreter takes charge of data transmission between the interface model and the combined simulation model. The distributed environment interpreter takes charge of data transmission between the interface model and the HLA/RTI. To evaluate the applicability of the developed interface, it was applied to the diving simulation of a submarine in a distributed environment. The result shows that a simulation result in a distributed environment using the interface is the same to the result in a single computing environment.