• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.732-744
• /
• 2020

In this study, a torrefaction of Quercus serrata to manufacture a molded charcoal was performed, investigated material properties, fuel characteristics, and performed a quantitative analysis of hazardous gases which occur during a combustion process. In addition, a molded charcoal in market was selected as a control group, and a comparative analysis was performed. As a result, the higher heating value (HHV) of the torrefied specimen was about 14% higher than that of molded charcoal, and its ash content was about 51 times lower. Moreover, after performing a quantitative assessment of hazardous gases (carbon monoxide, nitrogen oxide, and sulfur dioxide) which were produced when each specimen was combusted for 900 seconds in an enclosed chamber, it was confirmed that the maximum value of generated amount of carbon monoxide on the torrefied specimen was about 50 times lower than that of the existing molded charcoal. Therefore, it was shown that the torrefied specimen produced in this study had a higher heating value than the molded charcoal in the market, and a very low amount of carbon monoxide generated during the combustion process.

• Journal of the Korea Society for Simulation
• /
• v.29 no.1
• /
• pp.71-79
• /
• 2020

As the urbanization trend in modern society continues, the concentration of the population induces the urban problems in the residential area. One of the well-known issues among various urban problems is the garbage problem, which causes deterioration of the residential environment of citizens and directly affects the satisfaction of municipal administration. Such garbage problem cannot be accurately predicted by analyzing the amount of waste emitted from residential areas, but it is necessary to analyze the lifestyle and characteristics of residents living in residential areas. In this study, we propose an agent-based residential modeling and simulation environment using discrete event system formalism to analyze the garbage problem and satisfaction level according to the distribution of residents in the residential area. To model the behavior of the residents, we utilized the Atomic Model to capture the temporal behavior. Also, we used the Coupled Model to model the multi-family and the building to enhance the reusability of the simulation model. Also, this study carried out simulation modeling and simulation for a multi-family residential area. The simulation results of the multi-family housing area show that considering the characteristics of the residents gives better results compared to the simulation results without considering the characteristics.

• Journal of the Korean earth science society
• /
• v.35 no.7
• /
• pp.543-553
• /
• 2014

The environmental behavior of $SO_2$ was investigated in terms of the factors affecting the temporal variabilities by analyzing the data sets obtained from the Yongsan district in Seoul from 2004 till 2013. To this end, the relationship between $SO_2$ and relevant parameters including particulate matters (such as $PM_{2.5}$, $PM_{10}$, and TSP (total suspended particulates)) and gaseous components ($CH_4$, CO, THC (total hydrocarbon), NMHC (non-methane hydrocarbon), NO, $NO_2$, NOx, and $O_3$) was investigated in several aspects. Over a decade, the annual mean concentrations of $SO_2$ varied in the range of $4.36-5.86nmole\;mole^{-1}$ (min-max) which was about five times lower than the regulation guideline set for the air quality management in Korea. In fact, this pattern greatly contrasts with some other air pollutants of which concentrations exceeded their guideline values significantly. According to our analysis, $SO_2$ was strongly correlated to the temperature and other relevant parameters. The overall results of this study confirm that the administrative regulation of $SO_2$ levels has been made effectively relative to other airborne pollutants.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.3
• /
• pp.473-481
• /
• 2017

It is well known that the air quality of 92% of the world is known to exceed the standard of WTO and the death caused by air pollution is almost 6 million per year. The $PM_{2.5}$ concentration in Korea is the second most serious among the OECD countries following Turkey. Since the $PM_{2.5}$ has a direct effect on the respiratory system, it has been actively studied in domestic and foreign countries. But current research on the $PM_{2.5}$ is limited in weather factor or air pollutants. In this paper, we consider the influence of spatial neighbor with weather factor or air pollutants using spatial panel model. We applied the proposed method to 25 borough of Seoul in Korea. The result shows a significant effect of spatial neighbor on the $PM_{2.5}$ concentration fields.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.607-618
• /
• 2017

Harmful air pollutants are exhausted from the various industrial facilities including the coal-fired thermal power plants and these substances affects on the human health as well as the nature environment. In particular, nitrogen oxides ($NO_x$) and sulfur dioxide ($SO_2$) are known to be causative substances to form fine particles ($PM_{2.5}$), which are also deleterious to human health. The integrated system composed of selective catalytic reduction (SCR) and wet flue gas desulfurization (WFGD) have been widely applied in order to control $NO_x$ and $SO_2$ emissions, resulting in high investment and operational costs, maintenance problems, and technical limitations. Recently, new technologies for the simultaneous removal of $NO_x$ and $SO_2$ from the flue gas, such as absorption, advanced oxidation processes (AOPs), non-thermal plasma (NTP), and electron beam (EB), are investigated in order to replace current integrated systems. The proposed technologies are based on the oxidation of $NO_x$ and $SO_2$ to $HNO_3$ and $H_2SO_4$ by using strong aqueous oxidants or oxidative radicals, the absorption of $HNO_3$ and $H_2SO_4$ into water at the gas-liquid interface, and the neutralization with additive reagents. In this paper, we summarize the technical improvements of each simultaneous abatement processes and the future prospect of technologies for demonstrating large-scaled applications.

• Journal of Food Hygiene and Safety
• /
• v.24 no.2
• /
• pp.143-147
• /
• 2009

A survey of food preservatives, sulfur dioxide and microbial contamination levels was conducted on 73 seasoned dried fishes(41 squids, 17 filleted fish, 6 Alaska pollack, 9 others) collected from domestic markets and internet. Among preservatives, only sorbic acid was detected in 25 samples including 23 seasoned dried squids, 1 seasoned filleted fish and 1 seasoned dried Alaska pollack with a range $0.01{\sim}0.92g/kg$. Sulfur dioxide was detected from one sample(seasoned dried squid) and its content was 10.5 mg/kg. All samples were contaminated by total aerobic bacteria, and the degree was $3.00{\sim}6.45\;log_{10}$ CFU/g(average level was $5.09\;log_{10}$ CFU/g). Escherichia coli, Salmonella spp. and Staphylococcus aureus were not detected in all samples. On the basis of the results above, most of the seasoned dried fishes were appropriate for Korea food standard, yet biological hygiene control will be needed constantly.

• Journal of Food Hygiene and Safety
• /
• v.25 no.2
• /
• pp.83-90
• /
• 2010

This study was conducted to investigate the residue amount of harmful materials on the 153 commercial medical herbs in Gwangju area. It was performed using the GC-ECD, GC-NPD, GC-MSD and the LC-UVD, LC-FLD, LC-MSD to analyze 200 pesticides. The heavy metals were determined using a Mercury analyzer and AAS. The sulfur dioxides were analyzed by modified Monnier-Williams method. The residual pesticides were detected in 7 samples, and were over MRLs (Maximum Risk Levels) in 2 samples (1.3%). The mean values of heavy metal contents (mg/kg) were Pb, 0.570; Cd, 0.081; As, 0.082; Hg, 0.0093. The measured values of Pb, As, Hg showed within MRLs. The excess samples of MRLs were 3 samples (changchul 2, cheongung 1) on Cd. The sulfur dioxides were over MRLs in 7 samples (4.6%), hwanggi and gugija. These results will be used to establish on the regulation of commercial medical herbs in Gwangju area.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.22-31
• /
• 2007

The proposed algorithm in this paper is based on the wavelet decomposition and the energy computation of composed blocks so the amount of calculation and complexity is minimized by adaptively replacing the DWT coefficients and managing the resources effectively. We are now living in the world of a lot. of multimedia applications for many digital electric appliances and mobile devices. Among so many multimedia applications, the digital image compression is very important technology for digital cameras to store and transmit digital images to other sites and JPEG2000 is one of the cutting edge technology to compress still images efficiently. The digital cm technology is mainly using the digital image compression features so that those images could be efficiently saved locally and transferred to other sites without any losses. JPEG2000 standard is applicable for processing the digital images usefully to keep, send and receive through wired and/or wireless networks. The discrete wavelet transform (DWT) is one of the main differences to the previous digital image compression standard such as JPEG, performing the DWT to the entire image rather than splitting into many blocks. Several digital images m tested with this method and restored to compare to the results of conventional DWT which shows that the proposed algorithm get the better result without any significant degradation in terms of MSE & PSNR and the number of zero coefficients when the energy based adaptive DWT is applied.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.201-208
• /
• 2010

The $SO_2$ and $NO_x$ removal with an activated coke catalyst was conducted by a two-stage reaction which first $SO_2$ was oxidized to $H_2SO_4$ and then $NO_x$ was reduced to $N_2$. But if unreacted sulfur dioxide entered in the second stage, the $NO_x$ reduction was hindered by the reaction with ammonia. In this study, experimental investigations by using lab-scale column apparatus on the product and the reactivity of $SO_2$ with ammonia over coke catalyst which was activated with sulfuric acid was carried out through ultimate analysis DTA, TGA and SEM of catalyst before and after the reaction. Also, the effect of reaction emperature on the reactivity of $SO_2$ with ammonia was determined by means of breakthrough curves with time. The obtained results from this study were summarized as following; Activated cokes were decreased carbon component and increased oxygen and sulfur components in comparison with original cokes. The products over coke catalyst were faced fine crystal of $(NH_4)_2SO_4$, which results in the pressure loss of reacting system. The order of general reactivity in terms of the reaction temperature after breakthrough for $SO_2$ was found to be $150^{\circ}C$ > $200^{\circ}C$ > $100^{\circ}C$. This was related to adsorption amounts of ammonia on the activated cokes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.81-86
• /
• 2019

Metal oxide/graphene composites have been known as promising functional materials for advanced applications such as high sensitivity gas sensor, and high capacitive secondary battery. In this study, tin dioxide ($SnO_2$) nanostructures were grown on chemically synthesized graphene nanosheets using a two-zone horizontal furnace system. The large area graphene nanosheets were synthesized on Cu foil by thermal chemical vapor deposition system with the methane and hydrogen gas. Chemically synthesized graphene nanosheets were transferred on cleaned $SiO_2$(300 nm)/Si substrate using the PMMA. The $SnO_2$ nanostuctures were grown on graphene nanosheets at $424^{\circ}C$ under 3.1 Torr for 3 hours. Raman spectroscopy was used to estimate the quality of as-synthesized graphene nanosheets and to confirm the phase of as-grown $SnO_2$ nanostructures. The surface morphology of as-grown $SnO_2$ nanostructures on graphene nanosheets was characterized by field-emission scanning electron microscopy (FE-SEM). As the results, the synthesized graphene nanosheets are bi-layers graphene nanosheets, and as-grown tin oxide nanostructures exhibit tin dioxide phase. The morphology of $SnO_2$ nanostructures on graphene nanosheets exhibits complex nanostructures, whereas the surface morphology of $SnO_2$ nanostructures on $SiO_2$(300 nm)/Si substrate exhibits simply nano-dots. The complex nanostructures of $SnO_2$ on graphene nanosheets are attributed to functional groups on graphene surface.