• Journal of the Korean Electrochemical Society
• /
• v.16 no.2
• /
• pp.70-73
• /
• 2013

Iridium oxide is well known as an electrocatalyst for the water oxidation. Recently, Dr. Bard's group observed the electrocatalytic behavior of individual nanoparticle of Iridium oxide using the electrochemical amplification method by detecting the single nanoparticle collisions at the ultramicroelectrode (UME). However, the electrocatalytic current is decayed as a function of time. In this study, we investigated that the reason of electrocatalytic current decay of water oxidation at Iridium oxide nanoparticles. We identified it is due to the bubble overpotential because the cyclic current decay and recovery were synchronized to the oxygen bubble growth and coming away from an Iridium disk electrode.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.5
• /
• pp.26-34
• /
• 2008

The performance of several catalysts to decompose the high test peroxide (HTP) was described in this paper. Manganese oxide, Platinum and Iridium were coated on the gamma alumina. The catalyst activity as active materials was measured at the flask reactor. The response time of various catalysts was also measured with a 50 Newton class thruster. $Ir/Al_2O_3$ that showed the best activity in the flask reactor and response time at the thruster, failed the reaction when continuous mode test was carried out with the thruster. $Pt/Al_2O_3$ and $MnO_2/Al_2O_3$ can be substitutes to decompose the HTP. In addition, for larger thruster, $MnO_2/Al_2O_3$ can be a good catalyst because its cost is below 5 % of $Pt/Al_2O_3$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.109-117
• /
• 2006

Hot firing performance test of hydrazine decomposition catalyst used for monopropellant thruster of satellite and launch vehicle was performed on the ground. A test equipment for hot firing performance measurement of catalyst test was developed in collaboration with Hanwha Corp., and the catalyst firing performance were tested with the equipment. After a reaction delay time, a catalyst activity and a granule stability were measured for 2 times, satisfactory results were obtained such as 25msec, 2%, $704^{\circ}C$ for each test items on the average. In addition, the current development status of domestic prototype catalyst and its decomposition performance test results are presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.371-374
• /
• 2008

The performance of several catalysts to decompose the high test peroxide (HTP) was described in this paper. Manganese oxide, Platinum and Iridium were coated on the gamma alumina. The response time of various catalysts was measured with a 50 Newton class thruster. Ir/$Al_2O_3$ that showed the fastest response time at the thruster, failed the reaction when continuous mode test was carried out with the thruster. Pt/$Al_2O_3$ and MnO_2/Al_2O_3$ can be substitutes to decompose the HTP. In addition, for larger thruster, MnO_2/Al_2O_3$ can be a good catalyst because its cost is below 5 % of Pt/$Al_2O_3$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.336-337
• /
• 2015

$TiO_2$는 표면적이 넓고 안정성이 높아 자체의 높은 밴드갭(3.0~3.2 eV)에도 불구하고 산업적으로 염소분해 전극으로써 사용되며, 최근 물분해 전극 적용 연구가 진행되고 있다. 전기화학적 물분해 반응을 위해서는 높은 과전압이 요구되므로 산업적으로 이용하기 위해 전도성을 향상시키기 위한 연구가 필요하다. 이러한 문제를 해결하기 위해 촉매제의 도핑이 연구되고 있으며 본 연구에서는 표면에 촉매를 도핑시키기 위한 두가지 방법을 연구하였다. 일반적으로 촉매로 사용되는 금속은 루테늄과 이리듐 등의 귀금속이며 촉매가 균일하게 도핑이 될수록 성능은 향상된다. 본 연구에서는 루테늄을 촉매로 선택하였으며 서로 다른 도핑 방법과 용매 하에서 물분해 실험을 진행하여 두 가지 방법의 물분해 효율을 비교하였다.

• Journal of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.253-255
• /
• 1982

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.235-236
• /
• 2015

$TiO_2$는 표면적이 넓고 안정성이 높아 자체의 높은 밴드갭(3.0~3.2 eV)에도 불구하고 산업적으로 염소분해 전극으로써 사용되며, 최근 물분해 전극 적용 연구가 진행되고 있다. 전기화학적 물분해 반응을 위해서는 높은 과전압이 요구되므로 산업적으로 이용하기 위해 전도성을 향상시키기 위한 연구가 필요하다. 이러한 문제를 해결하기 위해 촉매제의 도핑이 연구되고 있으며 본 연구에서는 표면에 촉매를 도핑시키기 위한 두가지 방법을 연구하였다. 일반적으로 촉매로 사용되는 금속은 루테늄과 이리듐 등의 귀금속이며 촉매가 균일하게 도핑이 될수록 성능은 향상된다. 본 연구에서는 루테늄을 촉매로 선택하였으며 서로 다른 도핑 방법과 용매 하에서 물분해 실험을 진행하여 두 가지 방법의 물분해 효율을 비교하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.218-222
• /
• 2011

During the development of the iridium catalyst for domestic production, the catalyst failure, loss, sintering phenomena are observed by high pressure and temperature. By these abnormal failure of catalyst bed, the performance of thruster is degraded. To figure out the detail phenomena on the damaged catalyst bed, a numerical analysis code is developed by assuming the catalyst bed as an one dimensional porous media. The numerical analysis code is validated with experiment data. Thereby, resulting physical phenomena are examined by considering the variation of catalyst bed characteristics incurred by catalyst granule failure. Through these numerical analyses we figure out the effect of the catalyst loss on the decomposition of hydrazine and ammonia.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.190.2-190.2
• /
• 2016

청정에너지 개발은 화석연료를 대체하기 위하여 꾸준한 관심을 받고 있다. 많은 대체에너지중 수소는 그 반응물이 순수한 물로써 환경오염이 없다. 기존의 수소를 얻어내는 방법은 메탄을 고온 고압에서 수증기와 반응시켜 얻는데 이 때 이산화탄소가 생성이 된다. 전기화학적 물분해 방법은 물을 수소와 산소로 선택적으로 분해시킬 수 있는 방법이다. $TiO_2$는 전기적으로 합성할 때 표면의 구조제어가 쉽고 열역학적, 화학적 안정성이 높아 자체의 높은 밴드갭(3.0~3.2 eV)에도 불구하고 산업적으로 염소분해 전극으로써 사용되고 있으며 최근에는 물분해 전극으로도 적용하는 연구가 진행되고 있다. 전기화학적 물분해 반응을 위해서는 높은 과전압이 요구되므로 산업적으로 이용하기 위해 전도성을 향상시키기 위한 연구가 필요하다. 낮은 전압에서도 물을 분해할 수 있는 촉매제의 도핑이 연구되고 있으나 대부분 촉매로 사용되는 금속은 루테늄과 이리듐 등의 귀금속이다. 본 연구에서는 저가촉매로써 몰리브덴을 도핑한 후 농도별 성능을 비교하였다. 전극의 성능비교를 위해 각 촉매의 농도별로 다른 전해질 농도조건에서 성능비교실험을 진행하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.2
• /
• pp.352-360
• /
• 2016

The purpose of this study was to determine the electrochemical properties develop DSA electrode for sewage sludge solubilization. Using Ir as a main catalyst, the catalyst selected for the sewage sludge solubilization durability and proceeds to functional electrode suitable for sewage sludge electrolysis experiment were obtained the following results. Less mass reduction of the sintering temperature of the main catalyst, Ir coated electrodes, the endothermic reaction zone $300^{\circ}C$ to $500^{\circ}C$, which was selected from a range of experiments. The efficiency of the catalyst results came up to $350^{\circ}C$ best. Each Binder stars (Ta, Sn, W) in this experiment was the biggest catalyst efficiency at $350^{\circ}C$. Used as a binder, $TaCl_5$, $SnCl_4$, $WCl_6$ of the Ta and without affecting the other characteristics of the main catalyst than Sn, W. For the 50% $IrO_2$ electrode is 1.4 V (vs. Ag / AgCl) in a current of about $29mA/cm^2$ was caused to evaluate the effectiveness of the electrode.