• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.5
• /
• pp.12-19
• /
• 1982

In general the design methods of adaptive filter are divided into two categories, one is based upon the local parameter optimization theory and the other is based upon stability theory. Among the various design techniques, the LMS algorithm by steepest-descent method which is based upon local parameter optimization theory is used widely. In designing the adaptive filter, the most important factor is the convergence rate of the algorithm. In this paper a new algorithm is proposed to improve the convergence rate of adaptive firter compared with the commonly used LMS algorithm. The faster convergence rate is obtained by adjusting the adaptation gain of LMS algorithm. And various aspects of improvement of the adaptive filter characteristics are discussed in detail.

• Journal of Biosystems Engineering
• /
• v.15 no.3
• /
• pp.186-198
• /
• 1990

인간 소뇌의 구조와 기능을 간략하게 수학적으로 모델링하여 입력에 따른 시스템의 적정 출력을 학습에 의한 적응 제어 방식으로 추출해 내는 소뇌모델 대수제어기(CMAC : Cerebellar Model Arithmetic Controller)가 제안되었다. 본 논문에서는 연구개발된 기존 신경회로망과의 비교 분석에 의거하여, 소뇌모델 대수제어기 대신 네트의 특성에 따라 소뇌모델 선형조합 신경망(CMLAN : Cerebellum Model Linear Associator Network)이라 하였다. 소뇌모델 선형조합 신경망은 시스템의 제어 함수치를 결정하는 데 있어, 기존의 제어방식이 시스템의 모델링을 기초로 하여 알고리즘에 의한 수치해석적 또는 분석적 기법으로 모델 해를 산출하는 것과 달리, 학습을 통하여 저장되는 분산기억 소자들의 함수치를 선형적으로 조합함으로써 시스템의 입출력을 결정한다. 분산기억 소자로의 함수치 산정 및 저장은 소뇌모델 선형조합 신경망이 갖는 고유의 구조적 상태공간 매핑(State Space Mapping)과 델타규칙(Delta Rule)에 의거한 시스템의 입출력 상태함수의 학습으로써 수행된다. 본 논문을 통하여 소뇌모델 선형조합신경망의 구조적 특성, 학습 성질과 상태공간 설정 및 시스템의 수렴성을 규명하였다. 또한 기존의 최대 편차수정 학습 알고리즘이 갖는 비능률성 및 적용 제한성을 극복한 효율적 학습 알고리즘들을 제시하였다. 언급한 신경망의 특성 및 제안된 학습 알고리즘들의 능률성을 다양한 학습이득(Learning Gain)하에서 비선형 함수를 컴퓨터로 모의 시험하여 예시하였다.

• Journal of Biomedical Engineering Research
• /
• v.38 no.5
• /
• pp.248-255
• /
• 2017

Polyurethane/polyethylene glycol(PU/PEG) hybrid scaffolds with various concentrations of PEG (0 to 50wt%) were prepared by electrospinning to evaluate the mechanical properties and the biocompatibility of the PU/PEG blend scaffolds. The 12wt% PU/PEG polymers were studied due to the absence of beads. The ultimate tensile strength of 12wt% PU was $8.2{\pm}0.5MPa$. The strength increased to $9.2{\pm}0.7MPa$ when 10% PEG was added to PU. However, the dry and the wet strength of PU/PEG scaffolds began to decrease dramatically when the PEG content was more than 10wt%. No cytotoxicity was observed for all the PU/PEG scaffolds investigated, indicating that the PU/PEG hybrid scaffolds are clinically safe and effective to small-diameter vascular grafts. In addition, the L-929 cells attached and proliferated well on the PU/PEG hybrid scaffolds.

• Korean Journal of Optics and Photonics
• /
• v.21 no.4
• /
• pp.139-145
• /
• 2010

A complete modeling of erbium-doped Bismuth-oxide fibers with a high doping concentration is presented. A 6-level amplifier system that incorporated clustering-induced concentration quenching, cooperative upconversion, pump excited state absorption (ESA), and signal ESA, was adopted for the modeling. The accuracy of the modeling was verified by comparing the calculated gain and noise figure with experimentally obtained ones.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.2
• /
• pp.45-53
• /
• 1995

In mobile communication, the performance of QAM technique is poor under deep fading even though Rayleigh channel characteristics are estimated and compensated. In this paper, we analyze the performance of 3/4 Trellis coded 16QAM in Rayleigh channel where burst errors are randomized by bit reversal block interleaver, and TCM coder is designed by computer search to be adequate for Rayleigh channel. The simulation results show that the interleaver has 2dB gain, the modified Viterbi decoder has 2.5dB, and diversity has 9dB gain at $P_{b}b/=10^{-3}$. This indicates that the 3/4 TC 16QAM is applicable to digital mobile communication with good performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.912-918
• /
• 2003

In this paper, we designed and implemented the dual band monopole antenna for cellular CDMA(Code Division Multiple Access) and IMT-2000(International Mobile Telecommunication 2000) repeater. The antenna was designed by using 3D simulations program, HFSS(High Frequency Structure Simulator). Electrical characteristics were measured by using HP 8720C network analyzer and measured maximum S$\_$11/ was -10.9 dB for all frequency bands of interests in Cellular CDMA and IMT-2000. Simulation results for antenna gain at 859 MHz and 2027.5 MHz were 2.38 dBi and 4.02 dBi respectively with omni directional radiation pattern. The size of implemented antenna is compact and the antenna can be produced in low cost enough for commercialization.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.11-17
• /
• 2008

This paper proposes the USN node location recognition method with low power, which is the modified centroid method. The conventional Zigbee node location recognition is used to the three RSSI values from three beacons, respectively. When a person move with node, the moving speed of USN node doesn't fast. Therefore, one among three positions used to the value that it is a previous value. This method doesn't large the error in terms of the exact position. Using hand-off method, we get about 30% power advantage than the conventional centroid method. And Our monitoring system add the function that it is possible to search for the node region by color.

• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.61-64
• /
• 2017

A phase shifter is one of the key components that change the phase of an individual antenna in millimeter-wave phased array system. This paper presents a low-loss phase shifter design with two parallel 2-state amplifiers. To get the same gain of $0^{\circ}/180^{\circ}$ each state, delay lines are in the middle of each stage of the 2-Stage amplifiers. Normally, when adding AMPs in parallel, a power combiner/divider such as Wilkinson Power Combiner/Divider is added, but they are directly connected because it can cause added losses in silicon wafer. The measured data shows 12dB gain and 174-degree phase difference at 5GHz.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.3
• /
• pp.41-47
• /
• 2008

This paper describes a wearable electro-stethoscope module for home-healthcare system. The module is consisted of a microphone, an instrumentation amplifier, a filter, a power amplifier etc. and is light and small. The phonogram signal from the module shows good performance. The test for the material and size of the sound collector of the chest piece is performed and the results is reflected on the prototype product. If the module is connected to wired or wireless communication network, so people can check their health without going hospital.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.234-242
• /
• 2021

In case implementation of microwave photonic (MWP) systems for phased array radars (PARs), noise and time delay error should be minimized to obtain accurate beam direction. Time delay error in MWP systems is generated from signal noise and timing jitter. In this paper, noise and timing jitter in MWP systems for PAR is researched, also according to the amplification of an erbium-doped fiber amplifier, noise and timing jitter variation is verified by an experiment. Timing jitter is decreased and SNR is increased if we amplify the signal by using an erbium-doped fiber amplifier, up to the amplification rate of signal and noise is similar.