• Title/Summary/Keyword: 이동 확산

Search Result 1,442, Processing Time 0.029 seconds

Diffusion Characteristics of Iodide in a Domestic Bentonite of Korea (국산벤토나이트에서의 요오드이온의 확산특성)

  • Lee, J.O.;Cho, W.J.;Hahn, P.S.;Park, H.H.
    • Nuclear Engineering and Technology
    • /
    • v.26 no.2
    • /
    • pp.285-293
    • /
    • 1994
  • The transport of radionuclides in a compacted bentonite is dominated by diffusion. Through-diffusion tests for iodide were performed to investigate the diffusion characteristics of anionic radionuclides in a domestic bentonite. The bentonite used was sampled from the southeastern area of Korea and the solution was synthetic groundwater spiked with a tracer of I -125(as Na$^{125}$ I). The dry densities of compacted bentonite were 1.2, 1.4, and 1.7 Mg/㎥. The apparent diffusion coefficients and the effective diffusion coefficients of the iodide decrease with increasing dry density. The values were from 3.80 to 7.12$\times$10$^{-11}$ $m^2$/s for the apparent diffusion coefficients and from 1.25 to 7.97$\times$10$^{-12}$ $m^2$/s for the effective diffusion coefficient, respectively. The experimental results also showed that the apparent diffusion coefficients depended on the pore structure of compacted bentonite and the effective diffusion coefficients were attributed to the pore structure and the effective porosity that represents the available pathway for the diffusional transport of iodide. The results obtained will be used as basic data for the safety assessment of a repository.

  • PDF

Characteristics of Multipath Delay Spread in Domestic Cellular Environment (국내 이동전파환경에서의다중경로에 의한 지연확산특성)

  • Dong-Doo Lee
    • The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.5 no.4
    • /
    • pp.47-63
    • /
    • 1994
  • An important parameter in characterizing mobile communication channel is delay spread. This paper presents the results of measured delay profiles and calculated distribution funcations of delay spread for typical cellular service environments at Taejon and vicinities. The measurement system uses 1023 chip length, 5 Mbps PN code and sliding correlation method. It has been evaluated by using commercial hardware channel simulator for reliability of out data. As results the value of mean delay spread is 2.08 $\mu\textrm{s}$for suburban area. 2.12 $\mu\textrm{s}$ for urban area and 1.3 $\mu\textrm{s}$ for national/local road. Delay spread is less then 3.4$\mu\textrm{s}$, 2.8$\mu\textrm{s}$ and 1.5 $\mu\textrm{s}$ for probability of 50% and 4.5$\mu\textrm{s}$, 4.2$\mu\textrm{s}$ and 2.9$\mu\textrm{s}$ for probability of 90% at each tested site. The difference of delay spread is within 7% between going and returning status along same street. In this experiment, we found delay spread for suburban area is larger than reported foreign test results.

  • PDF

A Study on Modeling and Forecasting of Mobile Phone Sales Trends (이동통신 단말기 판매 추이에 대한 모형 및 수요예측에 관한 연구)

  • Kim, Min-Jeong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.6
    • /
    • pp.157-165
    • /
    • 2016
  • Among high-tech products, the mobile phone has experienced a rapid rate of innovation and a shortening of its product life cycle. The shortened product life cycle poses major challenges to those involved in the creation of forecasting methods fundamental to strategic management and planning systems. This study examined whether the best model applies to the entire diffusion life span of a mobile phone. Mobile phone sales data from a specific mobile service provider in Korea from March of 2013 to August of 2014 were analyzed to compare the performance of two S-shaped diffusion models and two non-linear regression models, the Gompertz, logistic, Michaelis-Menten, and logarithmic models. The experimental results indicated that the logistic model outperforms the other three models over the fitted region of the diffusion. For forecasting, the logistic model outperformed the Gompertz model for the period prior to diffusion saturation, whereas the Gompertz model was superior after saturation approaches. This analysis may help those estimate the potential mobile phone market size and perform inventory and order management of mobile phones.

Terminal Mobility Function Design based on TINA (TINA 기반의 단말 이동성 기능 설계)

  • 송경철;이상백;박동선
    • Proceedings of the Korea Society for Industrial Systems Conference
    • /
    • 2000.05a
    • /
    • pp.183-189
    • /
    • 2000
  • 본 논문에서는 TINA 기반의 단말 이동성 기능을 설계하였다. 노트북이나 핸드폰과 같은 이동 단말의 확산으로 사용자들은 다양한 이동 멀티미디어 서비스를 요구하게 되다. 이러한 서비스 제공을 위해 단말 이동성 지원이 중요시되고 있다. 본 논문에서는 단말 이동성 지원을 위해 개방형 정보통신망 구조의 하나인 TINA에 단말 이동성 연구인 Mobile IP의 원리를 적용하여 단말 이동성 지원을 위한 세부 인터페이스를 설계하였고, 단말 이동시 수반되는 핸드오버 절차를 제시하였다. TINA 기반의 단말 이동성 설계는 단말 이동성이 요구되는 다양한 서비스 개발에 적용될 것으로 기대 된다.

  • PDF

Moisture Diffusion of Concrete an Early Ages Considering Self-deseccation (자체건조를 고려한 초기재령 콘크리트의 수분확산)

  • 김진근;이칠성
    • Magazine of the Korea Concrete Institute
    • /
    • v.10 no.5
    • /
    • pp.189-195
    • /
    • 1998
  • 콘크리트 구조물이 초기재령에서 외기에 노출될 때, 수부확산으로 인하여 수분의 이동이 일어나고, 또한 자체건조도 발생한다. 이러한 콘크리트 내부의 수분확산과 자체건조에 의하여 콘크리트의 위치에 따라 상대습도가 변호한다. 특히 고강도 콘크리트의 경우에 단위 시멘트량을 많이 사용하기 때문에 , 초기재령에서 콘크리트 단면의 수분분포는 자체건조에 의하여 큰 영향을 받는다. 본 연구에서는 초기재령에서 외기에 노출된 콘크리트 내부의 여러 위치에서 상대습도를 측정하였다. 또한 자체건조로 인한 콘크리트의 상대습도 변화를 측정하여 초기재령에서 수분확산과 자체건조가 콘크리트 내부의 각 위치에서 상대습도에 미치는 영향을 검코하였다. 그리고 수분확산 이론에 의하여 해석결과와 실험결과를 비교하여 \ulcorner재령에서 수분확산 이론의 타당성을 검증하였다. 저강도 콘크리트 단면의 수분분포는 주로 수분확산에 의하여 영향을 받았으며, 자체건조의 영향은 매우 작게 나타났다. 그렇지만 고강도 콘크리트는 수분확산 뿐만 아니라 자체건조에 의하여도 영향을 받았다. 또한 수분확산 이론에 의한 해석결과는 실험결과를 잘 예측하였다.

Au wire와 Ag pad간 확산현상의 가속수명시험

  • Kim, Cheol-Hui;Hwang, Sun-Mi;Song, Byeong-Seok
    • Proceedings of the Korean Reliability Society Conference
    • /
    • 2011.06a
    • /
    • pp.49-54
    • /
    • 2011
  • 반도체 칩과 패키지는 wire로 연결되는데, 이 때 반도체의 용도에 따라 다양한 wire와 pad의 조합이 사용되며, 이 두 개의 다른 금속물질 결합부위는 IMC(Inter Metallic Compound)를 형성하게 된다. 그러나, 결함 및 오염 등에 의하여 인접재료의 원자들이 이동하는 확산(Diffusion)이 발생하게 되어 IMC가 성장하고, 두 개의 금속물질간의 확산율은 상호 다르며, 확산율은 온도에 따른 함수가 된다. Au wire와 Ag pad를 이용하여 제조한 IR 수신모듈를 대상으로 3가지 고온조건에서 가속수명시험을 실시하였고, 각 온도별 수명분포를 바탕으로 가속계수와 활성화에너지 도출 및 정상온도에서의 수명도 예측할 수 있었다.

  • PDF

High Efficiency Diffusion Scrubber for the Collection of Water Soluble Gases in Ambient Air (대기중 수용성 기체 포집을 위한 고성능 확산 스크러버)

  • 장인형;이동수;이동훈;박영훈
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.11a
    • /
    • pp.324-325
    • /
    • 2000
  • 대기 오염 성분에 대한 연구 뿐 만 아니라 반도체 가공 현장의 환경평가를 위한 미량 기체의 효과적인 포집 및 정량 방법이 요구되고 있다(Lue, S. J., 1999). 이들 오염원은 대부분 pub 이하의 농도로 존재하며 순간적으로 변화하므로 분석을 위해서는 연속적으로 여러 원소를 감시할 수 있는 장비가 효과적이다. 이러한 관점에서 스크러버 형태의 확산 포집기와 이온 크로마토그래피를 이용한 대기중 미량 기체의 연속 정량법이 가장 효과적이다. (중략)

  • PDF

Characteristics of Yellow Sand Aerosol in Seoul (일부 서울지역 황사 에어로졸 특성에 관한 연구)

  • 김윤신;정경훈;권성안
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2002.04a
    • /
    • pp.77-78
    • /
    • 2002
  • 동북아 지역은 급속한 산업 및 경제활동 증가로 세계의 주요 오염 지역으로 대두되고 있다. 대기오염 물질의 Global 이동확산은 어느 특정지역에서 다른 지역으로 광범위하게 이동 확산하기 때문에 이에 따른 오염과 피해 사이에 시간과 공간적인 차이가 존재하고 있으며, 그 인과관계도 불명확한 상황이다. 한편, 사막에서 발생한 모래먼지는 시정을 악화시키며 이들 중 미세한 입자(0.1-10$\mu\textrm{m}$)는 산란과 흡수를 통하여 대기의 복사평형과 기후변화에 커다란 영향을 미칠 수 있다(Carlson, 1980; Duce, 1980). (중략)

  • PDF

A Two-Dimensional Pollutant Transport Model Using SOWMAC Scheme (SOWMAC법을 이용한 2차원 오염물질 전송모형)

  • 이동수;박원경;윤병만;편종근
    • Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
    • /
    • 1998.09a
    • /
    • pp.24-30
    • /
    • 1998
  • 고도의 산업발달은 인간환경과 밀접한 하구와 해안의 오염을 심화시켜 최근 사회적 문제로 대두되고 있으며, 이에 오염물질의 이동을 예측하고 제어하려는 노력이 꾸준이 진행되어 왔다. 이 같은 노력은 수치모형을 이용한 수질관리 연구에도 많은 진전을 가지고 왔으며, 오일러적 모형, 라그랑쥐적 모형, 오일러-라그랑쥐 적 모형이 대표적이다. 오일러-라그랑쥐적 모형은 이류에 대해 라그랑쥐적 방법, 확산에 대해 오일러적 방법으로 해석함으로서 각 방법들의 장점을 취하여 수치적 진동, 수치적 확산이 적고 효율성이 뛰어나 최근 많이 연구되고 있다. (중략)

  • PDF

Agent 기반의 부하 분산을 위한 집합 기반 확산 전송 기법

  • Kim, Joong-Hang;Jeon, Sang-Hyun;Chang, Hyeong-Soo
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2005.11a
    • /
    • pp.796-798
    • /
    • 2005
  • 본 논문에서는, 부하 분산의 대표적인 기법들 중에서 빠른 부하 분산을 수행하지만 workload의 이동 횟수가 많은 diffusion method와 느린 부하 분산을 수행하지만 workload의 이동 횟수가 매우 적은 messor의 두 가지 방식을 집합을 기반으로 하는 확산 전송 방식으로 융합하여, 효과적으로 부하 분산을 수행할 수 있는 기법을 제안한다. 또한 실험을 통하여, 제안된 기법이 부하 분산치 속도와 workload의 이동 및 이동을 위한 메시지의 증가 사이에서 적절한 trade-off를 제공하는 것을 보인다.

  • PDF