• Title/Summary/Keyword: 이동차량네트워크

Search Result 245, Processing Time 0.028 seconds

An Enhanced Greedy Message Forwarding Protocol for High Mobile Inter-vehicular Communications (고속으로 이동하는 차량간 통신에서 향상된 탐욕 메시지 포워딩 프로토콜)

  • Jang, Hyun-Hee;Yu, Suk-Dae;Park, Jae-Bok;Cho, Gi-Hwan
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.46 no.3
    • /
    • pp.48-58
    • /
    • 2009
  • Geo-graphical routing protocols as GPSR are known to be very suitable and useful for vehicular ad-hoc networks. However, a corresponding node can include some stale neighbor nodes being out of a transmission range, and the stale nodes are pone to get a high priority to be a next relay node in the greedy mode. In addition, some useful redundant information can be eliminated during planarization in the recovery mode. This paper deals with a new recovery mode, the Greedy Border Superiority Routing(GBSR), along with an Adaptive Neighbor list Management(ANM) scheme. Each node can easily treat stale nodes on its neighbor list by means of comparing previous and current Position of a neighbor. When a node meets the local maximum, it makes use of a border superior graph to recover from it. This approach improve the packet delivery ratio while it decreases the time to recover from the local maximum. We evaluate the performance of the proposed methods using a network simulator. The results shown that the proposed protocol reveals much better performance than GPSR protocol. Please Put the of paper here.

Design and Implementation of Telematics Contents Gateway Based on Interoperability (상호운영성 기반의 텔레매틱스 컨텐츠 게이트웨이 설계 및 구현)

  • Kim, Do-Hyun;Min, Kyoung-Wook;Jang, Byung-Tae;Li, Ki-Joune
    • The KIPS Transactions:PartD
    • /
    • v.14D no.2
    • /
    • pp.249-264
    • /
    • 2007
  • As the need for telematics contents services due to the frequent traveling of people is increasing, it is necessary to provide various telematics contents by connecting and integrating current telematics contents which are collected and provided by each individual data provider. However, it is difficult to integrate or exchange the current telematics contents, because the data providers use different telematics contents models. Therefore, we propose a 'telematics contents gateway(TCG); system, which enables to integrate different telematics contents, so that the contents can be interoperable. The TCG can be a solution for several problems in the current telematics contents providing system. First of all, it has been impossible to search the contents without any information about data providers, because of the absence of metadata in the current systems. For this problem, TCG supports a search function based on a web-service technology. Second, TCG provides a common road network model for interoperability, and the model can be a solution to integrate different road network models into the common model. Moreover, integration algorithm for enhancing the correctness of integration will be proposed. In addition, it is designed by multi threads and multi queue structure. The TCG developed with C# on a windows system has been running and we verified that there was no information loss in the integration process. In addition, the speed of content integration and transfer satisfied the requirement of telematics services providers.

Design of Network Architecture in Underground Structure Field Information Based on VI-GNSS (VI-GNSS 지하구조물 현장정보 네트워크 아키텍쳐 설계)

  • Jeon, Heung-Soo;Jang, Yong-Gu;Oh, Chang-Kyun;Kim, Min-Koan
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.18 no.1
    • /
    • pp.64-73
    • /
    • 2015
  • Recently, the integrated utilization of technology with IT is in demand for the effectiveness of field management together with the prevention and prompt action on safety accident at construction site. In addition, the establishment of construction site support system is necessary to implement the securing of worker's safety, smooth work instruction, efficiency in construction, and others. Data standardization and network architecture were designed regarding data and sound information for data transmission between systems and management. These were to construct USFSS based on integrated VI-GNSS technology in this research. In the stability test of data for each system constructed through it, around 98% stability was secured between workers and for transfer vehicle system within underground structure and field server system in regards to the data transmission stability, around 100% stability was secured between field server system and control system, respectively. Also, in the sound transmission stability test, around 99% reliability could be secured with 1km distance as its standard in case of sound transmission from underground structure construction site to field office near the field through wireless FRS system.

An Analysis of Satellite Communications System structure for NCW (NCW대비 군 위성통신 구조 분석)

  • Park, Woo-Chul;Cha, Jae-Ryong;Kim, Jae-Hyun
    • Journal of Satellite, Information and Communications
    • /
    • v.4 no.1
    • /
    • pp.1-7
    • /
    • 2009
  • As the information age comes out, the aspect of future war brings about the many changes in terms of war-fighting environment. Accordingly, information superiority and intelligence-centric warfare have been important and new war-fighting concept such as NCW(network centric warfare) have been turned up. This paper proposed all-weather core-strategy communications systems guaranteeing not only the real-time transmission of the information collected in a battlefield and expansion, automation, and rapidity of a battlefield but also broadband, mobility, survivability, and flexibility. The proposed military satellite communications system is classified into wideband mass capacity link, survivability, and the system supporting OTM(on the move) communication for the real-time transmission of battlefield information. This paper analyzed the essential operation concepts and core schemes of the U.S. Army's next generation system, TSAT(Transformational Satellite Communication System). Base on the analysis results, this paper proposed that the architecture of next generation military satellite communications systems for NCW have to provide the data rate, anti-jamming capability, network control and management capability which are optimally adaptable for the wireless channel environments such as jamming and interference and to support the variety of platforms like high-speed mobile vehicles, micromini devices, super-high speed unmanned aerial vehicles. Finally, this paper also proposed that next generation military satellite communications systems need the technologies such as the adaptable multi-antenna, laser link, and next-generation anti-jamming waveform.

  • PDF

Edge to Edge Model and Delay Performance Evaluation for Autonomous Driving (자율 주행을 위한 Edge to Edge 모델 및 지연 성능 평가)

  • Cho, Moon Ki;Bae, Kyoung Yul
    • Journal of Intelligence and Information Systems
    • /
    • v.27 no.1
    • /
    • pp.191-207
    • /
    • 2021
  • Up to this day, mobile communications have evolved rapidly over the decades, mainly focusing on speed-up to meet the growing data demands of 2G to 5G. And with the start of the 5G era, efforts are being made to provide such various services to customers, as IoT, V2X, robots, artificial intelligence, augmented virtual reality, and smart cities, which are expected to change the environment of our lives and industries as a whole. In a bid to provide those services, on top of high speed data, reduced latency and reliability are critical for real-time services. Thus, 5G has paved the way for service delivery through maximum speed of 20Gbps, a delay of 1ms, and a connecting device of 106/㎢ In particular, in intelligent traffic control systems and services using various vehicle-based Vehicle to X (V2X), such as traffic control, in addition to high-speed data speed, reduction of delay and reliability for real-time services are very important. 5G communication uses high frequencies of 3.5Ghz and 28Ghz. These high-frequency waves can go with high-speed thanks to their straightness while their short wavelength and small diffraction angle limit their reach to distance and prevent them from penetrating walls, causing restrictions on their use indoors. Therefore, under existing networks it's difficult to overcome these constraints. The underlying centralized SDN also has a limited capability in offering delay-sensitive services because communication with many nodes creates overload in its processing. Basically, SDN, which means a structure that separates signals from the control plane from packets in the data plane, requires control of the delay-related tree structure available in the event of an emergency during autonomous driving. In these scenarios, the network architecture that handles in-vehicle information is a major variable of delay. Since SDNs in general centralized structures are difficult to meet the desired delay level, studies on the optimal size of SDNs for information processing should be conducted. Thus, SDNs need to be separated on a certain scale and construct a new type of network, which can efficiently respond to dynamically changing traffic and provide high-quality, flexible services. Moreover, the structure of these networks is closely related to ultra-low latency, high confidence, and hyper-connectivity and should be based on a new form of split SDN rather than an existing centralized SDN structure, even in the case of the worst condition. And in these SDN structural networks, where automobiles pass through small 5G cells very quickly, the information change cycle, round trip delay (RTD), and the data processing time of SDN are highly correlated with the delay. Of these, RDT is not a significant factor because it has sufficient speed and less than 1 ms of delay, but the information change cycle and data processing time of SDN are factors that greatly affect the delay. Especially, in an emergency of self-driving environment linked to an ITS(Intelligent Traffic System) that requires low latency and high reliability, information should be transmitted and processed very quickly. That is a case in point where delay plays a very sensitive role. In this paper, we study the SDN architecture in emergencies during autonomous driving and conduct analysis through simulation of the correlation with the cell layer in which the vehicle should request relevant information according to the information flow. For simulation: As the Data Rate of 5G is high enough, we can assume the information for neighbor vehicle support to the car without errors. Furthermore, we assumed 5G small cells within 50 ~ 250 m in cell radius, and the maximum speed of the vehicle was considered as a 30km ~ 200 km/hour in order to examine the network architecture to minimize the delay.

Development of an Autonomous Vehicle: A1 (자율주행자동차 개발: A1)

  • Chu, Keon-Yup;Han, Jae-Hyun;Lee, Min-Chae;Kim, Dong-Chul;Jo, Ki-Chun;Oh, Dong-Eon;Yoon, E-Nae;Gwak, Myeong-Gi;Han, Kwang-Jin;Lee, Dong-Hwi;Choe, Byung-Do;Kim, Yang-Soo;Lee, Kang-Yoon;Huh, Kun-Soo;SunWoo, Myoung-Ho
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.19 no.4
    • /
    • pp.146-154
    • /
    • 2011
  • This article describes the Autonomous Vehicle #1 (A1), which won the 2010 Autonomous Vehicle Competition (AVC) organized by Hyundai Kia automotive group. The A1 was developed for high speed and stable driving without human intervention. The autonomous system of A1 was developed based on in-vehicle networks, electronic control units, and embedded software. Novel environment perception and navigation algorithm were evaluated and validated through the AVC. In this paper, we presented the system and software architecture of A1.

A Design of a Personnel Control System Using RF Tag in Port Facilities (RF 태그를 활용한 항만 내 인원관리 시스템)

  • Cha, Jin-Man;Park, Yeoun-Sik
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.14 no.11
    • /
    • pp.2581-2585
    • /
    • 2010
  • In the field of network sense for the Ubiquitous environment, the technology of RFID is a significant part. Due to the real time processing of information and the property of network, RFID has been used in service field such as distribution, administrative control of physical distribution, remote measuring device, and security. instead of currently used bar-code. The management system of port facilities using the current RFID technology has the effects of reducing working hours and improvement in data processing, but it is not proper for human resource allocation since it is dominantly worked for physical resources. In this paper, we designed and implemented personnel control system using RFID of 2.4GHz in port facilities which presents a monitoring system for safety operation and increase of efficiency using RFID in order to overcome the limitations and problems of current port operation management techniques.

A Design of a Personnel Control System Using RF Tag in Port Facilities (RF 태그를 활용한 항만 내 인원관리 시스템)

  • Cha, Jin-Man;Park, Yeoun-Sik
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2010.10a
    • /
    • pp.520-523
    • /
    • 2010
  • In the field of network sense for the Ubiquitous environment, the technology of RFID is a significant part. Due to the real time processing of information and the property of network, RFID has been used in service field such as distribution, administrative control of physical distribution, remote measuring device, and security, instead of currently used bar-code. The management system of port facilities using the current RFID technology has the effects of reducing working hours and improvement in data processing, but it is not proper for human resource allocation since it is dominantly worked for physical resources. In this paper, we designed and implemented personnel control system using RFID of 2.4GHz in port facilities which presents a monitoring system for safety operation and increase of efficiency using RFID in order to overcome the limitations and problems of current port operation management techniques.

  • PDF

Exploring Reasonable Pricing System for Inland Container Cargo Transportation Using GIS Service Area Analysis (GIS 서비스 권역분석을 활용한 컨테이너 육상운송운임 산정방안)

  • Joo, Seung-Min;Um, Jung-Sup
    • Spatial Information Research
    • /
    • v.20 no.3
    • /
    • pp.1-14
    • /
    • 2012
  • This paper has investigated the unreasonable pricing system for container cargo with special reference to inland transport since it is determined by administrative boundary without considering travelling distance. This research is primarily intended to improve the current pricing system by introducing a pricing support system about the container cargo in the country which applies GIS service area analysis to transportation data. Price simulation maps were generated to find out reasonable pricing strategy. Pricing alternative integrating travelling distance into administrative zoning brings about more desirable results than individual driving cost alone. The research can contribute to more reasonable pricing for the fuel consumption expense and serve as useful instruments for planning pricing system for container cargo. It is anticipated that this research output could be used as a valuable reference to increase the scientific and objective pricing for container cargo by overcoming serious constraints suffered from the past non-GIS-based approach.

A Study on the Development and Effectiveness of Land Use Planning Methods for Carbon Reduction of Transportation : A Case Study of Asan-Tangjeong District (교통부문 탄소배출 저감을 위한 토지이용계획 기법 개발 및 탄소저감 효과검증 : 아산탕정지구를 대상으로)

  • Lee, Woo-Min;Park, Hyo-Sook;Cheon, Choon-Keun;Lee, Kyung-Hwan
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.1
    • /
    • pp.638-645
    • /
    • 2016
  • The purpose of this study was to develop land use planning methods for carbon reduction of transportation and verify the effectiveness. Therefore, this study derived carbon reduction design elements, such as high-density suburb, mixed-use development, pedestrian network and community corridor, which can be applied in the land-use planning stage by examining previous research. The carbon reduction design elements utilized the actual site during the research process. The carbon reductions were estimated using VISUM. Consequently, when carbon reduction design is applied to the site, the carbon emissions declined in the year. As a result of estimating the carbon reduction, approximately 450.7tCO2/yr was reduced.