• Journal of computational fluids engineering
• /
• v.21 no.1
• /
• pp.50-57
• /
• 2016

In various industries related with construction and military machinery, a large amount of power is normally required because such machinery operations, such as digging or breaking, take place under difficult working conditions in a rough environment. Thus, a hydraulic system needs to be applied as the major power transfer system. To produce and supply hydraulic power depending on the various load conditions, a hydraulic piston pump is utilized as a typical power source for a hydraulic system. In the present study, numerical simulations were conducted using the commercial program, Ansys CFX 14.5. To lubricate the moving parts as the pump starts to operate, a small amount of oil leaks out through the clearance between the orifice in the piston-shoe and the recess at the swash-plate. Taking this into consideration, a cylindrically shaped computational domain was modeled to maintain the same equivalent leakage area. To validate the numerical method applied herein, the numerical results of the flow rate at the discharge port were compared with the experimental data, and a good agreement between them was shown. Using the verified method, the effects of the discharge pressure and the angle of the swash-plate were also evaluated under several load conditions. The results of the present study can be useful information for a hydraulic piston pump used in many different manufacturing industries.

• 한국해양학회지
• /
• v.28 no.4
• /
• pp.292-304
• /
• 1993

The east Sea circulation is numerically modeled with refined grid resolution elaborated open boundary condition, and by directly imposing the measured surface temperature and salinity typical the east Korean Warm current are clearer than those in previous works. among others, The Ulleung warm Water and the Intermediate Water of minimum salinity are nicely reproduced. The latter is formed in the northern/northwestern coastal region in winter and is advocated southward by strong under-current. the former is associated with a locally generated anti-cyclonic gyres. The model indicates strong seasonal variation of Nearshore Current along the Japanese coast from wintertime barotropic to summertime baroclinic structures. the associated strong reversed under-cur-rent in summer is not well understood. Global circulation pattern is characterized by two regions of cyclonic and anti-cyclonic gyres in the north and south, respectively. The presence of these gyres indicates importance of local dynamics in East Sea circulation. This model, however, does not completely resolve the problem of overshooting of the East Korean Warm current.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.4
• /
• pp.1-13
• /
• 2008

In this paper, we propose a method to solve a problem in binarizing the rear number plate image captured by a camera on a moving vehicle. An image may be shadowed by the cavernous structure of the rear side of a moving vehicle and it makes us hard to get a high quality of binary image. Therefore, we first detect a shadow edge and then divide an image into the shadow part and non-shadow part by the edge. Finally, the binary image is obtained by binarizing each part and merging them In this paper, we do comparative work on a group of binarization methods including our method, the method suggested by Zheng, the method using block binarization, and the method using labeling. The result shows that our method achieves better performance than others in most cases.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.32-44
• /
• 2010

A two-dimensional thermal response and ablation analysis code for predicting charring material ablation and shape change on solid rocket nozzle is presented. The thermogravimetric analysis (TGA) techniques have been used to characterize the thermal decomposition constants for Arrhenius parameters. Two heterogeneous reactions involving carbon and the oxidizing species of $H_2O$ and $CO_2$ are considered and determined by Zvyagin's ablation model and kinetic constants. The moving boundary problem and mesh moving are solved by remeshing-rezoning method in MSC-Marc-ATAS program. The difference between the calculated and experimental value of char and ablation thickness is up to 20%. For the performance prediction of thermal protection systems, this method will be integrated with a three-dimensional finite-element thermal and structure analysis code through the real time sensing of in-depth temperature and heat flux.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.2
• /
• pp.1-8
• /
• 2003

This paper proposes an object-based image retrieval technique based on the dominant color pair information. Most of existing methods for content based retrieval extract the features from an image as a whole, instead of an object of interest. As a result, the retrieval performance tends to degrade due to the background colors. This paper proposes an object based retrieval scheme, in which an object of interest is used as a query and the similarity is measured on candidate regions of DB images where the object may exist. From the segmented image, the dominant color pair information between adjacent regions is used for selecting candidate regions. The similarity between the query image and DB image is measured by using the color correlogram technique. The dominant color pair information is robust against translation, rotation, and scaling. Experimental results show that the performance of the proposed method has been improved by reducing the errors caused by background colors.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.2
• /
• pp.38-45
• /
• 1997

In this paper, the three-dimensional stress effect of thermal oxide is simulated. We developed a three-dimensional finite element numerical simulator including three-dimensional adaptive mesh generator that is able to refine and eliminate nearby moving boundary of oxide, and oxidation solver with stress model. To investigate the behavior of thermal oxidation the simulations of thermal oxidation for island and hole structures are carried out assuming silicon wafer of <100> direction, temperature of $1000^{\circ}C$, oxidation time of 60min, wet ambient, initial oxide thickness of $300\AA$, and nitride thickness of $2, 000\AA$. The main effect of deformation at the corner area of oxide is due to distribution of oxidant, but the deformation of oxide is affected by the stressin theoxide. In the island structure which is the structure mostly covered with nitride and a coner is opended to oxidation, oxidation is reduced at the coner by compressive stress. In the hole structure which is the structure mostly opedned to oxide and a coner is convered with nitride, however, oxidation is increased at the coner by tensile stress.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.68-76
• /
• 1998

In this paper, a new morphological image segmentation algorithm of hierarchical structure by binary split is proposed. It splits a region with the lowest quality into two regions using only two markers having the highest contrast. Therefore, it improves the quality of image with limited regions and reduces contour information which is not sensitive to human visual system, when compared with the conventional algorithm. It is appropriate to PSTN, LAN, and mobile networks, of which the available transmission bandwidth is very limited, because the number of regions can be controlled. And the proposed algorithm shows very simple structure because it doesn't need post processing to eliminate small regions and reduces much computation by using only structuring element of small size at simplification step of each hierarchical structure when compared with the conventional algorithm.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.79-88
• /
• 1999

In this paper we address the tracking method which tracks only target object in image sequence including moving object. We use a contour tracking algorithm based on intensity and motion boundaries. The motion of the moving object contour in the image is assumed to be well describable by an affine motion model with a translation, a change in scale and a rotation. The moving object contour is represented by B-spline, the position and motion of which is estimated along the image sequence. we use pattern recognition to identify target object. In order to use linear Kalman Filters we decompose the estimation process into two filters. One is estimating the affine motion parameters and the other the shape of moving object contour. In some experiments with dial plate we show that this method enables us to obtain the robust motion estimates and tracking trajectories even in case of including obstructive object.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.551-560
• /
• 2008

The basic strategy of OSMU(One-source Multi-use) in digital image is a marketing that applying one source to other genres for leverage based on that cross-referencing in different genre enabled that one material(one-source) has synergy effect when reproduced to various products(multi-use) as cultural sources are available through on-line and digital format. Recently, according to the characteristics of culture industry with Window Effect, many culture contents such as movies, games, animations and characters are carefully planned at its design stage to get the maximum effect. Especially, the fact that one leading-trend source makes it easier to produce additional products with the least cost is observed and it enables organized management which resulted in low marketing and PR cost. This paper confirmed that OSMU strategy in Korea mainly get started from online to offline comparing to Japan and USA.

• Journal of the Korea Computer Graphics Society
• /
• v.20 no.2
• /
• pp.25-32
• /
• 2014

We present an example-based approach to synthesizing physically simulated Rube Goldberg machines in which a series of rigid body elements are sequentially triggered and driven along the causal chain. Given a set of elements, our goal is to automatically instantiate and arrange those elements to meet the user-specified requirements including the start and end positions, and the boundary of movement. To do so, we first sample small-scale machines consisting of only a few elements randomly, and represent the connectivity between every pair of components as a graph structure. Searching over possible paths in this graph solves our problem by finding a path that can be unrolled to satisfy the given requirements, and then assembling components sequentially along the solution path. In order to ensure that the machine works precisely in a physically simulated environment, we finally elaborate the layout of assembled components by a simple greedy algorithm. We demonstrate the usefulness of our approach by displaying a large diversity of Rube Goldberg machines built with only five kinds of elements.