• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제6권6호
• /
• pp.261-270
• /
• 2017

최근 스마트 온디바이스 및 정보 통신 기술의 발전으로 인하여, 중단 없는 서비스에 대한 요구가 점차 증가하고 있다. 이에 따라 시스템의 장애 발생 시에도 지속적으로 서비스를 제공할 수 있는 고가용성이 주목받고 있다. 한편, 대부분의 인터넷 서비스는 TCP를 기반으로 제공되기 때문에, 스마트 온디바이스의 고가용성을 위해서는 효율적인 TCP 세션 복구 기술이 필수적이다. 그러나 기존 TCP 세션 복구 기술은 높은 세션 복구비용이 요구되거나 페일오버를 지원하지 않는 문제점이 존재한다. 이러한 문제점을 해결하기 위해, 본 논문에서는 스마트 온디바이스의 고가용성을 위한 TCP 세션 복구 기술을 제안한다. 이를 위해 첫째, 순서 번호와 확인 응답 번호의 보정을 통해 TCP 세션의 재연결 과정 없이 TCP 세션을 복원한다. 둘째, 마스터 서버와 백업 서버 간에 TCP 세션 복구 데이터를 동기화하고, 마스터 서버의 장애 발생 시 페일오버를 수행한다. 마지막으로, 가상 IP 주소와 GARP (Gratuitous ARP) 패킷의 전송을 통해 피어에게 무중단 서비스를 제공한다.

• 한국산업보건학회지
• /
• 제20권1호
• /
• pp.63-69
• /
• 2010

This study was conducted to compare the concentration of various air contaminants in nine different laboratories during routine activities. Volatile organic compounds (VOC) were sampled and analyzed using NIOSH Method 1500 and asbestos fibers were sampled and analyzed using NIOSH Method 9002 and 7400. Detectable levels of acetone, toluene and ethanol were found in all the laboratories and xylene and n-hexane were detected in eight of the nine laboratories. All the VOC concentrations were well below the Korean Ministry of Labor's Exposure Limit and American Conference of Governmental Industrial Hygienists' (ACGIH) Threshold Limit Values (TLVs). Total VOC concentrations at the university laboratories were significantly higher than those at governmental agency laboratories. Airborne fiber concentrations were below 0.01 fibers/cc, while the concentration of chrysotile was 2% in insulation materials sprayed on the ceiling of one laboratory. While all the governmental agency laboratories (n=4) had fume hoods, two out of the five university laboratories did not have fume hoods. The capture velocity of half of the fume hoods were below the maintenance standard(0.4 m/sec). In conclusion, the study suggests that the current controls in place at both university and government agency laboratories are not sufficient in limiting exposure to harmful chemicals to non-detectable levels, though they appear to be adequate in protecting workers to levels below applicable occupational exposure limits. The study also suggests that researchers working in university laboratories may be exposed to greater levels of contaminant than those working in government agency laboratories.

• 한국산업보건학회지
• /
• 제23권4호
• /
• pp.348-355
• /
• 2013

Objectives: In working environment measurement, sampling is an important stage for obtaining reliable result as analysis. A personal air sampling pump is one of the most fundamental and important element in the work environment measurement, but it remains at the level of calibrating the flow rate of the pump before and after sampling. There is no checking whether the flow rate set at the initial stage would be hold during sampling. The purpose of this study was to develop a method to evaluate the flow rate performance of particulate sampling pump with three-pieces cassette holder containing filters commonly used to sample particulate. Materials and methods: We tested back pressure of particulate sampling pumps commonly used in Korea with three-pieces cassette holder containing various filters, and tried to find out the combination conditions of filters in accordance with back pressure required by ISO standard 13137. Results: We found out the matrix of sampling media such as three-pieces cassette holder containing filters applicable to the pressure drop required by the ISO standard for evaluating the flow rate stability under increasing pressure drop and long term(8 hour) performance. Conclusions: This evaluation method using sampling media matrix for checking flow rate stability proposed by this study could be very useful tool to find out good performance pumps before sampling.

• 공업화학
• /
• 제7권1호
• /
• pp.136-144
• /
• 1996

역상현탁 중합방법으로 sodium acrylate 및 아크릴산을 모노머로 사용하고 분산제로는 sucrose fatty acid ester(S-570), 증점제로는 Xanthan-gum, 가교제로는 EDGMA 및 GPGE, 개시제로는 $K_2S_2O_8$, 및 용매로는 사이클로헥산을 사용하여, sorbitol의 함유량을 10~50%로 변화시키면서 sorbitol이 결합하고 있는 고흡수성 수지(SAP)를 합성하였다. 합성한 고흡수성 수지를 모노머량의 0.05~0.40mol%로 표면가교 시켰고, 입자형태는 구형이었으며 입자크기 분포는 $177{\sim}707{\mu}m$ 이었다. 고흡수성 수지의 흡수량은 물에 대하여는 785~1086배 이었고, 0.9% NaCl 용액에 대해서는 50~83배 이었다. Sorbitol의 함유랑이 증가할 수록 고흡수성 수지의 흡수량과 보수량은 감소하였으며, +5 cal/g SAP의 흡열특성을 나타내었다.

• 한국산업보건학회지
• /
• 제3권2호
• /
• pp.194-203
• /
• 1993

Quality Control programs for industrial hygiene laboratory have successfully been operated since the 1st round was initiated in April 1992. Three rounds have been completed. Overall analytical performance of participants was improved through a subsquent round. The first round had a large variation among analytical results of all participants, 26.34%~504.22% of coefficient of variation. But the variation of analytical performance in the 2nd and 3rd rounds decreased to 40.42%~52.55% and 10.74%~20.98%, respectively. The difference of analytical performance among participants was decreased by operation of subsquent round. By distribution of Running Performance Index (RPI), over 50% of participants belongs to Category 3 in the first round. The average percentage of participants assigned to Category 3 in the 2nd and 3rd round was decreased to 37.2%. A definite analytical performance improvement of participants seems to be obtained. "A" and "B" group have more participants assigned to Category 3 than those of "C" group through the distribution of RPI by group divided to similar participant. By the distribution of RPI all participants, the percent of participant being over 200 RPI in the 1st round was 43%~52%, but decreased to 9%~29% and 9%~27%, in the 2nd and 3rd round, respectively. These results mentioned above indicate that the analytical performance of all participants have been improved by subsquent Quality Control Program although newcomers joined and a few participants droped out. But, there are some participants with poor analytical performance. Industrial Health Research Institute (IHRI) will offer service such as education, communication and visitation to them, and improve quality of their analytical performance in the future.

• 마이크로전자및패키징학회지
• /
• 제12권4호통권37호
• /
• pp.315-321
• /
• 2005

교류자기장에 의한 유도가열체를 이용하여 LCD 평판 디스플레이 패널의 가열을 최소화하면서 IC 칩을 실장시킬 수 있는 COG 접속기술에 대해 연구하였다. 크기 5mm${\times}$5mm, 두께 $600{\mu}m$의 Cu 도금막으로 제조한 유도가열체에 14 kHz, 230 Oe의 교류자기장을 인가시 60초 이내에 유도가열체의 온도가 Sn-3.5Ag 무연솔더의 리플로우에 필요한 $250^{\circ}C$에 도달하였으며, 유도가열체로부터 2 mm 떨어진 부위에서부터 기판의 온도는 $100^{\circ}C$ 이하로 유지되었다. 이와 같은 Cu 도금막 유도가열체에 14 kHz, 230 Oe의 교류자기장을 120초 동안 인가하여 Sn-3.5Ag 솔더범프를 리플로우 시켜 COG 실장을 하는 것이 가능하였다.

• 한국전자파학회논문지
• /
• 제25권11호
• /
• pp.1135-1141
• /
• 2014

넓은 동적 범위와 고속 샘플링률로 신호를 양자화하면서 실시간으로 광대역 DDC를 수행하는 일은 시간 소모가 크기때문에 주로 하드웨어인 FPGA나 ASIC에서 구현이 되어 왔다. 실시간 광대역 소프트웨어 DDC는 신호 환경이 바뀌어도 유연하게 대처할 수 있으며, 재사용이 가능하다. 또한, 하드웨어보다 가격이 저렴한 장점을 가지고 있다. 본 논문에서는 광대역 DDC를 소프트웨어 기반으로 고속의 병렬처리 구조로 설계하여, 실시간으로 저장 가능한 시스템 설계에 대해 연구하였다. 마지막으로 신호를 실시간으로 수신하기 위한 핑퐁버퍼링 기법과 고속신호처리를 위한 CUDA를 적용하여 신호처리 규격을 만족하는 광대역 DDC 설계 과정을 검증하였다.

• 한국산업보건학회지
• /
• 제9권1호
• /
• pp.156-172
• /
• 1999

Potential chemical hazards encountered in painting operation of four shipyards and a ship-repair shop were investigated through the material safety data sheets (MSDS). Material safety data sheets (MSDS) for 307 paints, 50 thinners and 34 binders were collected and reviewed. It was shown that various organic solvents such as aromatic hydrocarbons, aliphatic hydrocarbons, ketones, alcohols, glycols, glycol ether acetates and esters were contained in painting materials. Of these solvents, xylene was found in the largest number of painting materials. sixty percent of the thinners contained xylene in the contents of 20-100%. Other most frequently found solvents were 1-methoxypropanol, 1-methoxypropyl acetate, n-butanol, methyl isobutyl ketone, toluene, isopropanol, and n-butyl acetate, etc. Glycol ethers such as 2-methoxyethanol (2-ME), 2-methoxyethyl acetate (2-MEA), 2-ethoxyethanol (2-EE), 2-ethoxyethyl acetate (2-EEA) and 2-butoxyethanol (2-BA) were regarded as having the potential to cause adverse reproductive effects, embryotoxic effect and hematotoxic effects, and were found in some epoxy panting materials. Coal tar pitch was included in some paints(13%) where polynuclear aromatic hydrocarbons (PAHs) could be contaminated. Inorganic pigments such as lead chromate and zinc potassium chromate were found in some paints (8%). The epoxy resin based paints, which may contain isocyanates such as toluene diisocyanates and hexamethylene diisocyanates causing potential sensitization and asthma to upper respiratory organ, were mostly used in the shipyards. The constituents in the MSDS were significantly different from the results analyzed using gas chromatography/mass detector: minor constituents or impurities were omitted in many MSDS. In conclusion, xylene was the most frequent organic solvent in painting materials, and glycol ethers, including 2-ME, 2-MEA, 2-EE, 2-EEA and 2-BA, were found some products. Also, painting workers may be exposed to PAHs, lead, chromate, isocyanates, organic tin and other various chemicals. The compositions of chemicals in painting materials were variable significantly, and the hazards were changed. These facts should be considered in environmental monitoring and control of the hazards.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.158-166
• /
• 1999

The purpose of this study was to investigate the correlation between airborne total dust and man-made mineral fibers (MMMF), and to estimate total dust concentration to maintain below the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV$^{(R)}$) for the MMMF. The regression coefficients between airborne total dust concentrations and fiber concentrations determined in the industries producing glass fibers, rock wool. refractory ceramic and continuous filament glass fibers products were 0.41, 0.42, 0.20 and 0.19, respectively. The size characteristics of fibers as well as the amounts of contaminated non-fibrous dusts could affect the correlation intensities. When total dust and fiber exposure data were compared with the occupational exposure limits, there was a large gap between two evaluation results. The regression coefficient between total dust and fiber data was increased ($r^2=0.88$) in the process of insulation installation generating in the higher levels of glass or rock wool fibers. In this case, an estimated total dust concentration of glass wool or rock wool fibers complying with the ACGIH TLV (1 f/cc) was $1.7mg/m^3$. In conclusion, the total dust and fibers concentrations was highly correlated at the higher exposure levels so that total dust-monitoring data could be used to control simply and economically and to estimate worker's exposure to fibers.

• 한국산업보건학회지
• /
• 제25권2호
• /
• pp.174-183
• /
• 2015

Objectives: The objective of this study is the estimation of factors influencing airborne fiber concentrations by means of an observation survey of asbestos-containing materials in buildings. Methods: Forty-five samples were collected from four commercial buildings by NIOSH Method 7400 and classified according to current condition, potential activity, construction year, and operations and maintenance(O&M). Results: Airborne fiber concentrations by current condition(classified as good, fair and poor) were significantly different(p<0.05). Concentrations by potential activity were significantly different among groups(p<0.05), and those from the low activity group were higher than those from the middle activity group. Based on construction year, airborne fiber concentrations from the decade of the 1990's were higher than those from the 1960's. When O&M status was considered, airborne fiber concentrations from 1960's buildings were lower than those buildings not operated and maintained(p<0.01), because dust generation was influenced by O&M status. It was found that airborne fiber concentrations were related to current condition and potential activity via regression analysis, but the coefficient of determination was low. Also, correlation analysis showed that the higher the potential activity, the more current condition is worsened, but the relationship was not significant(r=-0.455, p>0.05). Conclusions: Airborne fiber concentrations in asbestos-containing buildings had weak relationships with current condition and potential activity.