• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.159-165
• /
• 2017

This study was accomplished to get to know the actual condition of denture management in understanding of denture management education relate to the post denture management of elderly, by meeting directly, among elderly people (more than 65 years old) wearing dentures, using structured guestionnaire from 15th Oct. to 15th Dec. 2016 in Daegu Metropolitan City. As a result, there was a significant difference in understanding of denture management education according to age, education level, cost of denture, general health condition, position of denture, period of wearing upper and bottom denture, frequencies of dental treatment and degree of halitosis(p<0.05). As a result, it is considered that continuing denture management education by studying characteristics of the elderly is needed and standardized denture management manual has to be made.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.281-302
• /
• 1987

의치상 재료 종류에 따라 의치, 점막 및 하악골에 발생되는 변위 및 응력을 연구하기 위하여 컴퓨터를 이용한 수치적 해석인 2차원 유한 요소법을 이용하였다. 2차원 유한 요소 모형으로선 표준 크기의 하악골 및 의치를 고려하여 231개의 사변형 요소 및 268개의 절점으로 분할한 후 각 구성 성분의 물리적 성질인 탄성률 및 프와송비를 대입시켰다. 사용된 의치로서는 일반 합성수지의치, 2mm후경의 탄성재를 의치상 하부에 이장한 합성수지의치, 2mm후경의 탄성재를 치아와 의치상 중앙에 삽입한 합성수지의치 및 0.5mm후경의 금속상의치의 4종류였으며, 하중시에 하악의 고정 부위로선 생체와 동일 조건을 부여하기 위하여 교근, 내측익돌근, 측두근등의 하악 폐구근이 부착되는 하악각 부위 및 하악 근돌기 부위의 16절점을 고정점으로 하였다. 하중 조건으로선 하악 제1대구치의 일점에 10kg의 수직 집중하중, 하악 중절치의 일점에 7kg의 수직 집중하중 및 하악 제 1소구치로 부터 하악 제2대구치까지의 교합면에 10kg의 수직 분산하중을 부여하여 분석한 결과는 다음과 같다. 1. 하중이 의치 교합면위의 가해진 부위에 따라 다양한 의치 회전 및 강하 현상을 보였으며, 탄성재를 이장 및 삽입한 합성 수지 의치의 변위가 일반 합성수지의치 및 금속상 의치의 변위보다 더 컸다. 2. 주응력을 고려할때 점막 부위에는 주로 압축 응력이 작용하였으며 치조제 부위는 압축응력과 인장 응력이 함께 작용하였다. 3. 탄성재를 삽입한 합성수지의치에 최고 등가 응력이 집중되었으며 그 다음은 탄성재를 이장한 합성수지의치, 일반 합성수지의치의 순이였으며 금속상의 경우는 금속을 따라서 높은 등가 응력이 넓게 분산되었다. 4. 의치상 종류에 관계없이 동일 하중 조건하에선 점막에 나타나는 등가 응력의 크기 및 분산양태는 유사하였다. 5. 하악골에서 등가 응력은 의치지지 부위에만 국한되지 않고 넓게 분산 되었으며 의치상 종류 및 하중 조건에 관계없이 치조제 후방 및 하악연의 후방 부위에 특히 높은 등가응력이 집중되었다. 6. 하악 중절치의 일점에 수직 하중을 가한 경우가 다른 하중 조건에 비하여 지지점과의 거리차이로 인하여 하악골에 가장 높은 등가 응력을 유발하였다. 7. 의치상 재료에 따른 하악 골에 발생되는 응력의 크기 및 분산에는 큰 차이가 없으나 금속상의 경우가 교합압을 분산하는데는 효과적이었다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.389-396
• /
• 2019

In patients with severely resorbed alveolar bone, it is difficult to gain retention in denture. Lack of retention makes denture unstable and lead to trouble in using denture. Suction denture seals the entire denture border with movable mucosa and this sealing mechanism forms negative pressure beneath the denture and produce higher retention and stability to denture. In this case, 4 edentulous patients visited for lack of retention with dentures. Considering their high expectation with retention, suction denture concept was used to fabricate retentive and stable denture. The purpose of this case report is to compare and analyze the considerations of suction denture restorations in edentulous patients.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.239-245
• /
• 2022

Purpose. The purpose of this study was to analyze the frequency and duration of adjustments after delivery of complete denture according to age, sex, arch with complete denture, insurance coverage of a denture, type of antagonist, the experience of wearing denture, the period of edentulism, and the type of denture base. Materials and methods. For 5 years, medical records of patients aged 65 or older who had treated full dentures were assessed for the frequency and duration of follow-up visits after complete denture delivery. Statistical analysis was performed at the 5% level of significance to analyze the correlation between the frequency and duration of follow-up according to sex, insurance coverage, arch with the complete denture, type of denture base, type of antagonist, experience of wearing a denture, age, and healing period. Results. 247 complete dentures were included in this study. The median frequency of follow-up visits was 3, and the median duration of follow-up was 36 days. Lower dentures had significantly higher frequency of follow-up visits than upper dentures (P = .036). According to the type of antagonist, dentures opposing a complete denture had a significantly higher frequency of follow-up visits than dentures opposing a removable partial denture (P = .016). There was no statistically significant difference in the frequency and duration of adjustments after delivery of complete denture by age, sex, insurance coverage, healing period, the experience of wearing a denture, and type of denture base. Conclusion. Within the limitations of the present study, lower complete dentures or dentures opposing a complete denture had an increased frequency of follow-up visits.

• Journal of Convergence for Information Technology
• /
• v.11 no.10
• /
• pp.205-214
• /
• 2021

This study is to investigate the relationship between the subjective mastication level of the elderly wearing denture and their satisfaction with dentures. The data was analyzed on 212 denture-wearing elderly people over the age of 65 living in Daejeon, Nonsan, Gongju, and Cheonan from November 22, 2019 to January 21, 2020. As a result of the survey, the higher the subjective mastication level, the more regular dental visits related to dentures showed that the denture satisfaction increases, as the dentures wearing period increases showed that the decrease in denture satisfaction. Based on the above results, it is required to prepare a denture follow-up management program and a denture repair cost support policy to improve the subjective mastication level and denture satisfaction of the elderly with dentures.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.511-516
• /
• 2019

The purpose of this study was to investigate the factors influencing on the denture satisfaction in the elderly with removable denture in Jeonju(N=157). The average of denture satisfaction was 3.62. As for denture satisfaction per sub-factors was in order of masticatory satisfaction(3.81), fixation satisfaction(3.66) and general satisfaction(3.46). The convergence factors on the denture satisfaction were the perceived oral health state, leisure activity, monthly pocket money, and visiting dental clinic. As a result, the influencing factors of denture satisfaction were general characteristics of denture wearers rather than denture related characteristics. Therefore, it is necessary to pay attention to the social factors(leisure life, economy level, etc.) of denture wearers in order to increase the denture satisfaction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.1-5
• /
• 2024

Purpose. To investigate the differences in the frequency of post-fitting denture check-ups based on gender, age, insurance status, denture arch, and type among patients aged 65 and above. Methods. This research analyzed 988 patients from National Health Insurance Service Ilsan Hospital's Department of Prosthodontics, who had denture fittings over the last 10 years. Variables including gender, age, insurance status and type, denture arch, and denture type were assessed. Statistical analyses were performed at a 5% significance level. Results. The study incorporated 988 dentures, revealing a median of 3 check-ups post-fitting. Male patients significantly had more visits than females (P = .017), and those with full metal dentures visited significantly more than those with partial dentures (P = .005). Other variables were not significantly influential on the post-fitting check-up frequency. Conclusion. Within this study's confines, an increase in denture adjustment sessions was observed for male patients and those with full metal dentures.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.346-351
• /
• 2014

Suction dentures enhance retention and support by forming negative pressure temporarily at the internal surface of denture base at times of swallowing and chewing because the areas surrounding the denture flanges are sealed by mobile mucosa. In this case, an 81-year-old male visited for new dentures. Considering the high expectations for retention and masticatory efficiency of dentures, fabricating complete dentures with suction dentures was planned. Preliminary impression was taken without applying pressure on retromolar pad area and diagnostic cast was fabricated. Afterwards, individual tray was made and final impression was taken, at the same time, gothic arch tracing was done to acquire centric relation and vertical dimension. Then, anatomic teeth were placed on maxilla and non-anatomic teeth were placed on mandible forming lingualized occlusion. Consequently, restoring a complete edentulous patient with complete dentures using mandibular suction denture resulted in recovering satisfying retention and function.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.39-45
• /
• 2024

The residual alveolar ridge below the denture base undergoes physiologic changes over time, which results in the existing dentures becoming less accurate with the residual alveolar ridge. In addition, changes of the occlusal plane, decreasing in vertical dimension and loss of denture retention and facial support can occur. Consequently, denture relining may be required to accommodate these changes and ensure an ongoing close fit. Relining a denture can be performed directly on the chairside using autopolymerizing relining materials or indirectly in the laboratory using heat-cured relining materials. A direct relining method is not only simple but also time and cost effective. However, irritation or burning sensation of the mucosa can occur, and poor bonding of the relining material to the denture base can be cited as disadvantages. The indirect relining method exhibits relatively high bonding strength between the relining material and the denture base, but the patient might experience discomfort during relining process period. This report will examine the characteristics of relining materials, including those used in the relining of CAD-CAM dentures, and explore the clinical considerations for relining procedures.

• The Journal of the Korean dental association
• /
• v.8 no.3
• /
• pp.279-282
• /
• 1970

구강점막상피는 여러 가지의 외적 자극을 받게 되는데,특히 치과보철용재료인 금속,인공수지 등으로 조제된 총의치,국부의치를 사용하는 사람들의 구강상피의 변화를 탈락세포의 각화상태를 관찰함으로서, 국소적인,기계적화학적인 자극이 점막상피에 어떤 영향을 미치며, 그것이 병적 진행 여부를 추구하였다. 이과 같이, 끼웠다 뺏다 하는 의치가 구강상피조직에 미치는 영향에 대해서는 많은 학자들이 연구해 왔다. 그리고 그들 대부분의 학자들이 비고정의치의 기능적인 작용이 악골에도 크게 자극하지만,그 보다도 점막상피에 더 많은 영향을 미치게 한다고 했다. 본인은 이러한 것을 Pap.씨법에 의하여 구강탈락세포를 관찰함으로서, 의치에 의하여 구강점막상피가 정상적인 각화과정에 장해를 받고 있는 것을 인정하게 했다. 즉 의치에 의하여 피복되어 있는 상피(접착점막)에는 정상적인 각화현상을 볼 수 없고,다만 parakeratose 로 이행되는 것을 관찰하게 되었다. 이러한 상피의parakeratose 현상은 의치에 의한 물리적인 작용(교합압)도 그 이유의 하나이겠지만,의치를 조제하는 재료,즉 금속인공수지의 화학적인 자극에 의히여 상피각화과정에 장해를 주어,의치사용자의 구강상피가 parakeratose 과정을 취하는 것을 알게 하였다. 이러한 것은 또한 의치의 교합압을 가장 많이 받는 경구개와 하악치조돌기점막상피의 각화도가 타부위에 비하여 심한 것으로 보아서도 증명된다.