• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.31 no.6
• /
• pp.35-39
• /
• 2002

최근, 산업의 발달로 인하여 생활수준이 향상되어 대량생산과 대량소비현상이 발생하고 도시의 밀집도가 높아 단위 면적당 거주하는 인구가 증가되면서 거주지역에서 발생되는 부산물이 현저히 증가되어 환경측면에서 복합적인 환경문제에 직면해 있다. 최근까지 대책마련에 고심하고 있는 도시에서 발생된 다량의 쓰레기 처리문제는 경제적인 측면에서 몇 년 전 까지는 대부분을 매립에 의존해 왔으나, 매립 방식에 의존하였으나 지가 및 공사설비의 상승, 일부 비위생적으로 조성된 매립장에서 배출되는 침출수 및 악취 등의 환경오염이 심각한 사회문제로 대두되면서 매립장의 확보나 증설은 해당 지역주민의 반발로 지방자치단체의 골치 아픈 과제로 등장하였다. 이러한 문제점을 보완하기 위해, 최근에는 매립지 확보의 어려움과 환경보존을 위하여 쓰레기를 정적이고 위생적으로 처리하기 위하여, 소각시설이 표 1과 같이 증가하고 있으나 소각 때 발생하는 다이옥신 등 인체에 치명적인 오염을 유발시키기 때문에 소각로 건설에 대한 환경운동단체와 주민들의 반발이 거세게 제기되고 있는 현실이다. 이러한 영향에 의해 앞으로는 소각보다는 쓰레기 자체를 감량.재사용.재활용하는 처리방식이 표 1과 같이 증가되는 현실이다. 쓰레기를 소각하는 것은 제 2오염을 유발시키고, 소각장 건설비용과 유지관리에 많은 예산이 소요된다. 쓰레기소각장을 건설할 때, 인근주민이나 환경단체로부터 반대의견에 직면하게 되는데, 그 사유는 쓰레기 처리과정의 전 단계인 반입.공급 과정에서 악취발생과, 후단계인 소각설비에서 발생되는 배출가스 오염원을 완전히 제거하라는 것이다. 최근에는 소각장의 설계.시공과정에서 최대한 악취발생과 확산을 억제하는 시설에 투자를 하고 있으며, 또한 주민 편익 시설과 부대 복리 후생시설은 소각시설 주변지역 주민틀의 소각시설에 대한 부정적 이미지를 불식시키며, 외부 방문객이나 운영 관리 요원들에게 쾌적한 환경조성과 업무효율 및 근무환경의 개선에 일익을 담당하고 있다. 본 고는 환경 친화적인 쓰레기 소각장을 설계하는 측면에서 1998년도에 턴키방식으로 발주되었고 2001년 12월에 준공하여 운전하고 있는 경기도 구리시 자원회수시설의 환기설비에 적용된 설계 및 시공개념을 소개하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.19-19
• /
• 2022

하천에 발생하는 홍수를 예측하는 과정은 실무에서 많이 사용하는 HEC-HMS 와 같은 강우-유출 모형을 사용하여 산정한 하천의 강우빈도별 설계홍수량으로부터 HEC-RAS와 같은 수리학적 모형을 이용하여 홍수위를 산정하는 방법을 주로 의존하고 있다. 하지만 이러한 방법은 강우 강도를 통하여 하천에 발생하는 빈도별 유량으로 간접적으로 홍수위를 산정하기 때문에 실시간으로 발생하는 홍수위 또는 홍수 발생시간을 정확하게 알기 힘들다. 하지만, 최근 하천의 홍수파 또는 배수영향으로 인한 이력현상으로 하천의 수위-유량관계의 이력현상으로 인해 발생하는 유량자료의 오차를 줄이기 위해 수위관측소에 H-ADCP 초음파 센서를 활용한 자동유량측정장치를 설치, 운영하여 실시간으로 유량자료를 관측하고 있다. 이러한 자동유량측정장치에서 측정하는 유량자료는 H-ADCP에서 지표유속으로부터 유량자료를 산정하는데, 홍수파 또는 배수영향으로 지표유속, 유량, 수위의 수문곡선에 발생하는 이력현상을 관측 가능하다. 관측된 수문곡선의 이력현상은 유속, 유량, 수위 순으로 첨두의 발생시간이 나타나는데, 유속의 첨두 발생시간과 수위의 첨두 발생시간은 수문곡선의 형태 또는 규모에 따라 달라진다. 따라서 본 연구에서는 기존의 강우-유출 모의에 의존한 홍수예보기법을 보완하여 더 정확한 홍수위, 홍수 발생시간을 예측하고, 홍수예경보 시스템에 정량적인 기준을 제시할 수 있도록, 하천에 발생하는 수문곡선의 첨두유속과, 첨두수위의 발생시간, 규모를 분석하여 둘의 관계를 제시하고자 한다. 분석방법으로는 대상유역으로 이력현상이 발생하는 영산강유역에 위치한 남평교, 나주대교 두 지점을 선정하고 자동유량관측소 관측자료인 지표유속, 수위자료를 취득한다. 취득한 자료로부터 지표유속의 첨두 값과, 수위의 첨두 값, 지표유속의 첨두지점으로부터 수위의첨두지점 까지 발생하는 시간을 홍수 사상별로 정리하여 첨두유속-첨두수위, 첨두유속-첨두수위발생시간의 관계그래프를 산정하였다. 남평교의 경우 유속-수위의 이력범위는 거의 없었다. 나주대교의 경우 유속-수위 이력범위가 현저히 나타나 관계를 분석하기 용이 하였다. 하천에 이력현상이 현저히 나타나는 경우 첨두유속-첨두수위, 첨두유속-첨두수위발생시간의 관계가 뚜렷하게 나타나고 이러한 결과를 바탕으로 하천의 홍수예경보 판단의 정량적 기준을 제안하였다.

• Journal of Navigation and Port Research
• /
• v.32 no.1
• /
• pp.1-7
• /
• 2008

Since the shipbuilding industry is at its peak to assimilate the large volume of orders in recent years, the Floating Dock has been an alternative to the dry dock which takes a certain period of time to build. Hence the use of Floating Dock is steadily increasing. Since the Skid Launching System(SLS) is used in Floating Dock, the balancing of the ship while launching is important and achieved by adjusting the Ballast tank of the Floating Dock. In this paper a Floating Dock Control Simulator for SLS is developed through the on-line interface of VRC(Valve Remote Control), Tank Level & Draft Measuring System and Valve Control algorithm on Simulation Tank Plan.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.62-70
• /
• 2001

As the ship hull is a compound-curved structure, plate bending process is indispensible. The process includes press bending process for forming major 1st curvature and heating process for forming the rest curvature. Especially the heating process that is above 50 percents of entire bending work is carried out exclusively by skillful workers. Many researches have been made to automate the heating process but most of these are about line heating process and researches for triangle heating process are rare. This study is a fundamental study to develop a efficient analysis method for triangle heating and focused on clarifying the deformation characteristics of plate by triangle heating. In this paper, we carried out heating experiments and analysed the deformation characteristics of plate to explain the deformation characteristics of plates rationally by showing the phase transformed high temperature region. Also we investigated the heating effect on the hull material properties by mechanical tests.

• Development and Reproduction
• /
• v.4 no.2
• /
• pp.221-229
• /
• 2000

Lactogenesis in mammary gland is under the control of various lactogenic hormones including hypophysial growth hormone and prolactin. Recent studies reported that such pituitary lactogenic hormones are also expressed in mammary cells as well as in pituitary. For the purpose to analyze the role of these non-pituitary hormones in mammary cells, $\beta$ -lactoglobulin (BLG) gene promoter was selected as a model system. The growth hormone suppressed BLG promoter activity when it was applied alone on cultured mammary HCll cells. Along with lactogenic hormones such as insulin, prolactin and glucocorticoid, however, it significantly enhanced expression of BLG promoter activity in a dosage- dependent manner. Exogenous expression of the growth hormone gene in cultured mammary cells also strongly promoted cell proliferation and BLG promoter activity. Bovine growth hormone promoter, on the contrary, did not revealed any notable activity. Above results suggest that endogenous expression of the pituitary hormone genes in mammary cells is not a regulation leakage but a physiological control. Moreover, artificial overproduction of the growth hormone in mammary gland may help increase milk production.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.122-130
• /
• 2018

The International Maritime Organization has enacted mandatory performance standards for protective coatings (PSPC), and as a result, shipyards must perform 2R or 3-pass milling on the edges of color plates. However, manual milling could result in many problems in terms of work environment and productivity. Therefore, it is necessary to develop an edge milling automation system that can satisfy the regulations. In this study, a basic design for an edge milling automation system was developed for standard color plates, and the machining process was established by applying shape recognition and a machining path generation algorithm. In addition, operating software was developed, and suitable milling conditions were derived based on the results of a milling test. The results could be used to build an automation system that meets the PSPC requirements and improve productivity.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.193-202
• /
• 2012

RFID tag awareness information and sensor data continuously change, and are categorized with the position. They are able to similar data in the side, called massive data to change in time. If two data are managed together, a convergence process of object awareness along change of environment is possible. If RFID middleware and EPCIS repository realized the integrated system, it is usable with the functions of middleware and repository at the same time. The real-time awareness information retrieval is possible without process, getting information from another middleware. In this paper, it is able to continuously read information from RFID reader and sensor equipment and store to database in order to make general object awareness and an object retrieval dependent on an environmental information change possible by real time. ALE-compliant middleware and EPCIS repository proposing for standards at EPCglobal is designed and implemented to be able to deal with RFID and sensor data to bases on the collected data.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.101-106
• /
• 2018

Multilayer mirrors have widely been used for monochromatization of X-ray with high reflection efficiency. The reflected X-ray energy or wavelength is determined by the d-spacing of a multilayer mirror and the incidence angle. The reflectivity critically depends on the number of bilayers and surface roughness on each interface. The multilayer mirror has a structure of alternative deposition of high and low Z-elements on the substrate. Each interface should be considered in the calculation of reflectivity. In this paper, we examine the degradation of reflectivity by the inter-diffusion combined with surface roughness on each interface for a W/Si multilayer mirror. In the depth-graded W/Si multilayer mirror, the FWHMs for angle and energy were larger than them of the uniform multilayer mirror. Inter-diffusion considerable gave rise to the degradation of reflectivity. To obtain measured reflectivity closed to the expected reflectivity, the inter-diffusion on W-Si and Si-W interfaces should be considered.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.387-394
• /
• 1995

A simple method for determining the absorption coefficient of oxyhemoglobin and deoxyhemoglobin in human blood is proposed as an application of the complex propagation constant of a guided wave in a thin-film optical waveguide. A serial multichannel sample chamber is constructed on the waveguide to vary the interaction length between the evanescent field and the sample, and the dependence of the sensor response on the interaction length is investigated for the various concentration of two hemoglobins. The sensor response is linearly proportional to the interaction length and the concentration of two hemoglobins. The attenuation constant due to the evanescent field absorption between the samples is experimentally obtained with the designed sensor, and then the absorption coefficient is determined by the proposed method. The absorption coefficients determined by the proposed method fairly well coincided with those obtained by the conventional transmission measurement.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.173-180
• /
• 2008

Certified e-Document Authority keep it with protection legal as a system a guarantee and identifies originality of an e-Record, It presume to be authenticity e-Records and contents of an e-Record prove what was not changed. But, e-Records has high medium degree of dependence and loss danger of information has very high problems. In addition, Because correction(attachment and deletion) and a revision of information are easy, a problem for integrity and the originality of an e-Record is caused. Existing system show the following inefficient. For the originality guarantee, an existing e-Documents encryption method accomplishes a encrypted process of a whole document with a symmetric key, if the information revised midway, the whole documents content must accomplish re-scanning and re-encryption process again. To get over such inefficient, this paper maximize efficiency which occurred at the time of partial information revision request by encryption and managing using the link information based on the linkage characteristics of the each page on the registered requested e-Documents, It was able to increase security configuration by minimizing problems on an information exposure through increasing complicated of the key management.