• Fashion & Textile Research Journal
• /
• v.23 no.5
• /
• pp.624-633
• /
• 2021

This study was intended to compare the comfort of wearing each type of commercially available bralette. The trial wearing experiment was conducted on five women in their 20s who wear an average Korean bra size of 70A. The experimental bralettes were of four types: a bralette with both hooks and pads and a bralette without both, a bralette with hooks but no pads, and a bralette with pads but no hooks. The wearing test results are as follows. First, in terms of functional satisfaction, the padded bralette provided the greatest satisfaction in supporting the chest from the bottom up and bringing it to the center, and the bralette without the pad provided the least satisfaction. In addition, the level of convenience of attaching/detaching was about twice as high in the bralette with hooks than those without hooks. Chest compression was found to be greater in bralettes without hooks than in those with hooks. In terms of the pressure on the shoulder strap and on the lower chest band, it was found that bralettes with hooks had a greater sense of pressure than those without. In the appearance characteristics test, the unpadded bralettes scored higher than the padded one in the matter of feeling embarrassed, because in unpadded bralettes, the nipples were exposed underneath the clothes . This study is meaningful in classifying the design of the bralette and evaluating the fit for each design in the absence of prior research on the bralette.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.147-162
• /
• 2018

The purpose of this study is to conduct a comprehensive and objective evaluation on the effectiveness of the activation policies for the Seongsu handmade shoe industry and to suggest the direction of more effective future policies using the results. The list of the activation policies for the Seongsu handmade shoe industry was investigated and awareness, appropriateness, effectiveness, and satisfaction were measured from the representatives of the Seongsu handmade shoe companies via an off-line survey. A total of 61 usable data sets were statistically analyzed. Based on the evaluation result of the policies, a focus group interview with 6 representatives of the Seoungsu handmade shoe industry was conducted to investigate the causes and effectiveness of the policies and the problems pertaining to those policies. The awareness, effectiveness, and satisfaction of the policies were evaluated as negatives, while the appropriateness of the policies was evaluated as a positive. The manufacturers of the handmade shoes evaluated policies that improve the environment of the workplace higher and evaluated the handmade shoes education policy lower than the distributors and raw materials suppliers. The problems with the activation policies for the Seongsu handmade shoes industry were found to be structural problems, issues with the implementation of the policies, and that the fact that the policies did not reflect the reality of the industry.

• Fashion & Textile Research Journal
• /
• v.20 no.6
• /
• pp.690-703
• /
• 2018

The purpose of this study is to help user understand the basic principles and interfaces of each program, and to provide a base material for the development of more efficient apparel CAD systems to compensate for each program's shortcomings by comparing the function of three apparel CAD systems: Yuka CAD, Opti-tex, and Style CAD. For this purpose, the skirt waistband and sleeve armhole line creation process were selected based on these two criteria. 1) There is a big difference between principle and method between CAD systems. 2) When CAD system is used rather than paper drawing process, the process is shortened and convenience is high. In this study, pros and cons and supplement point of each CAD system are suggested by comparing the functions of the CAD system performing the selected drafting process by four criteria: icon, key, method, and characteristic point. As a result of the study, it was confirmed that the three CAD systems differ in the basic principle and interface environment. As a result of analyzing the skirt waistband method function, it was confirmed that the band line is formed directly on the outline of the skirt and the band dart recognition function is the most efficient function and as a result of the analyzing the sleeve armhole line method function, it was confirmed that the curve generation function using the shape of the actual curve measure and the length adjustment function through the automation of the dimension calculation is the most efficient function.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.261-272
• /
• 2021

The purpose of the present study was to evaluate the thermal insulation of air-filled winter jackets according to the amount of air-filler using a thermal manikin. The insulation of these jackets' was compared to a down padded jacket with an identical design and size. The amounts of air-filler were 100% (26,219 cm³), 70% (18,645 cm³), 50% (13,110 cm³), and 0% (0 cm³). The results showed that a clothing insulation (Icl) of 0%, 50%, 70%, and 100% air, and 100% down jackets was 0.208, 0.243, 0.207, 0.176, and 0.315 clo, respectively. In addition, the down jacket with waisttaped had a clothing insulation of 0.369 clo. However, the highest value of clothing insulation per clothing weight was the 50% air-filled jacket in all conditions. In terms of regional power consumption of the thermal manikin, the down jacket consumed less power for the shoulder and chest than the air-filled jackets. In conclusion, in order to maximize the thermal insulation of air-filled jackets, an optimal amount of air-filler, that is, an amount which does not compromise (break) the layer of inner air between the surface of manikin and the lining of the jacket, should be explored. Further studies on lining materials, end-closed design, and changes in thermal insulation under the conditions of strong wind or heavy snow are recommended.

• Fashion & Textile Research Journal
• /
• v.25 no.1
• /
• pp.82-91
• /
• 2023

The children who are part of this study are compelled to wear masks at educational facilities for an extended period of time as they continue to be exposed to Asian dust, fine dust, and COVID-19. However, use of masks is currently causing them a lot of inconvenience. This study aimed to gather basic data for the development of a mask that is suitable and comfortable for children to wear. A total of 331 children aged 1 to 9 were investigated through their parents in terms of their lifestyle, mask wearing and purchasing status, mask preferences, mask inconvenience, and mask improvement. According to the survey on mask use, the proportion of children aged 1-3 years old and wearing ultra-small/XS masks, 4-6 year olds wearing small/S, and 7-9 year olds wearing small/S was the highest. More than 80% of children were wearing masks with a standard filter of KF80 or higher. The purchase criteria for children's masks were found to be excellent in terms of wearing comfort and meeting the filter standards. According to the survey on inconvenience of wearing masks, the majority of those surveyed expressed the need to develop children's masks of different sizes. Furthermore, they experienced various kinds of inconveniences from adult masks, such as the material quality and length of earring bands; it was deduced that these aspects need to be taken care of. The vertical folding type was the most popular in the mask design for children. Children have to wear masks for a prolonged period of time, but they are experiencing lot of inconvenience, which need to be addressed.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.44-54
• /
• 2024

In this study, the sizing systems of 40 unisex sweatshirt brands were analyzed to collect the size information needed to produce unisex clothing. Each size specification was compared with the body size distribution and percentiles of men and women aged 18 to 29. Depending on the brand, unisex sweatshirt sizes ranged from 1 to 8. Despite being unisex apparel, three brands offered only one or two sizes. Out of the brands surveyed, 50% were found to offer four or five sizes. Out of the 40 brands, 25 used letters such as "S," "M," and "L" to indicate the size designation. More than 92.5% of the brands included M and L, and the sizing system tended to focus on larger sizes such as XL and 2XL rather than smaller sizes such as XS and S. The size specifications of shoulder width, chest circumference, sleeve length, and total length were compared with the body size distribution and percentiles of men and women aged 18 to 29. The distribution of each size specification mostly appeared in a section larger than the men's body size. The size specifications of unisex sweatshirts were set close to or larger than men's sizes and hardly represented women's sizes. To increase consumer satisfaction with unisex clothing, establishing a size standard that could accurately reflect the body size distribution of men and women was found to be imperative. Such a size standard could also help each brand specify or diversify its target and differentiate itself with other brands.

• Smart Media Journal
• /
• v.12 no.7
• /
• pp.43-51
• /
• 2023

As online transactions increase, the image of clothing has a great influence on consumer purchasing decisions. The importance of image information for clothing materials has been emphasized, and it is important for the fashion industry to analyze clothing images and grasp the materials used. Textile materials used for clothing are difficult to identify with the naked eye, and much time and cost are consumed in sorting. This study aims to classify the materials of textiles from clothing images based on deep learning algorithms. Classifying materials can help reduce clothing production costs, increase the efficiency of the manufacturing process, and contribute to the service of recommending products of specific materials to consumers. We used machine vision-based deep learning algorithms ResNet and Vision Transformer to classify clothing images. A total of 760,949 images were collected and preprocessed to detect abnormal images. Finally, a total of 167,299 clothing images, 19 textile labels and 20 fabric labels were used. We used ResNet and Vision Transformer to classify clothing materials and compared the performance of the algorithms with the Top-k Accuracy Score metric. As a result of comparing the performance, the Vision Transformer algorithm outperforms ResNet.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.2
• /
• pp.192-205
• /
• 2011

This study analyzed the registration of patent and utility models by fashion firms in Korea. A total of 2,291 registration cases of IPC A41B-H from the period of 1996 to 2009 were collected by KIPRIS of the Korean Intellectual Property Organization (KIPO). All cases were analyzed by year to review the longitudinal trend and 481 cases of IPC A41B (shirts, underwear, baby linen, and handkerchiefs) and 1088 cases of IPC A41D (outerwear, protective garments, and accessories) were analyzed by content (provided benefit type and developing method), by detailed product items and the characteristics of the applicant. The results of this study were as follows: 1) Registration of IPC 41 increased steeply by the year (especially since 2006) and the patent registrations increased more than those in the utility model. 2) Analyzing the application content of A41B on the basis of benefit showed that 75% were to provide new functions and the rest were for health. In terms of the developing method, 83% of benefit provided by the application were by design development, 11.2% were by material, and the rest was by process, In the cases of IPC A41D, 23.6% were for safety and protection. In terms of the developing method, the process and material development were more frequently adopted than in the cases of A41B. 3) The major product types of A41B were socks, underwear, and infant wear, whereas gloves and parts of clothing were major items in A41D. 4) In terms of the characteristics of the applicant, registration by firms was greater for patents than for utility models and registration by foreigners increased in 2006 due to the complete opening of the retail market. 5) Fifteen universities registered for a total 57 cases and major applications were for IT related clothing or high-tech protective items.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.2
• /
• pp.378-391
• /
• 2017

The application of Big Data has been introduced to the Korean fashion industry; however, the literature has not yet investigated how well high technologies are being perceived and adopted by the practitioners of fashion companies. Recognizing the lack of research, the current research explores how big data analysis has been adopted by fashion practitioners based on the Technology Acceptance Model (TAM) that considers the effect of organizational characteristics (i.e., innovation, slack, and IS infra maturity). First, all TAM relationships were accepted as significant; however, the effect of perceived ease of use on the attitude toward big data was greater than perceived usefulness. Regarding organizational characteristics, while organization innovation had positive impacts on perceived usefulness as well as perceived ease of use, organization slack did not show significant and positive influence on perceived ease of use only. On the other hand, IS infra maturity had a negative effect on perceived usefulness while it did not have any significant impact on perceived ease of use. Finally, the level of perceived usefulness is decreasing as the IS infra of the fashion organization becomes more mature. With the results, the study suggested that fashion industry needs more education on the usage of big data analysis systems and development in related analysis tools.

• Journal of Fashion Business
• /
• v.23 no.1
• /
• pp.37-48
• /
• 2019

WKSF (Warp-knitted spacer fabrics) knitted using a double Raschel machine is the three-dimensional knit that has vertically connected separate layers in loop structures. Because of its unique structure, the fabric is light, compressible and breathable. Owing to the high production speed, the use of the fabric is increasing in various areas. The purpose of this study is to establish the design process in the utilization of WKSF program and analyze the difference between WKSF and Neoprene as garment materials.. The study on the design related to WKSF has rarely been carried out because of the complexity of WKSF structure and the difficulties encountered in analyzing the structure and thread. Therefore, checking beforehand the simulation results similar to a final knit using the CAD program for WKSF can only enhance the efficiency of the design for the light knits. The conclusion drawn after designing the light knits using the CAD program and analyzing the pros and cons of WKSF through the various property evaluation techniques is as follows. The tension characteristic analysis results indicated that Neoprene specimen has the elastic transformation and resilience, thus behaving like an elastic product such as rubber. By contrast, in the event that clothing and fashion accessories are designed with WKSF, these products are kept in a boxy style fit so that the fabric can be applied flexibly to a curvy body line. In addition, WKSF is good in forming noticeably around a curvy body, because its resistance shear deformation is lower than that of Neoprene.