• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.131-134
• /
• 2008

한의학의 대중화와 세계화를 위해서는 타 의학과의 차별화와 진단의 객관성 확보가 매우 중요하며 이를 위해서는 한의학의 독창적인 의료체계인 사상의학을 통해 차별화를 이루고 또한 객관성 확보를 위해 IT 공학기술과 연계하여 진단기술을 개발한다면 효율적일 것으로 예상한다. 본 논문에서는 사상의학의 체질 분류를 목적으로 하여 체질 분류법 중 용모사기론을 기반으로 한 안면 영상을 통한 사상체질 분류시스템을 개발하기위해 20대 여성을 대상으로 안면 영상을 수집하고 피실험자에 대한 체질분류 작업을 진행하여 안면 요소와 체질 간의 상관관계를 분석하여 체질별 차이를 나타내는 항목을 설정하고 이에 대한 분석을 실험을 통해 수행하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.90-93
• /
• 2007

우리나라만의 독창적인 의료체계인 사상체질은 의학적 본질의 우수성에도 불구하고 크게 대중화 되지 않았으며 인지도 또한 높지 못하다. 이는 사상체질에서 가장 중요한 부분이 사상체질의 정확한 분류인데 현재 임상현장에서 행해지고 있는 사상체질 분류 방식은 임상의의 경험과 주관적 소견에 의해 분류되고 있기 때문에 진단 결과에 객관성이 없고 정확도가 낮게 평가되고 있는 실정이다. 이를 위해 사상체질 진단 방법 중 하나인 용모사기론을 IT공학의 영상처리에 적용하여 안면 영상 분석을 통해 사상체질 분류를 수행하고자 한다. 이를 위해 본 논문에서는 사상의학적 원전과 기존의 방법들을 조사, 연구하여 사상체질 분류의 중요한 요소를 결정하고 시스템 구현을 목표로 실험을 통해 사상체질 분류의 유의성을 갖는 측정 요소에 대해 검증해 보고자 한다.

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.1
• /
• pp.37-43
• /
• 2007

1. Purpose : This study is to present effective exposure conditions to acquire the best image of simple abdomen in Film Screen (F.S) system and Computed Radiography (C.R) system. 2. Method : In the F.S system, while an exposure condition was fixed as 70kVp, images of a patients simple abdomen were taken under the different mAs exposure conditions. Among these images, the best one was chosen by radiologists and radiological technologists. In the C.R system, the best image of the same patient was acquired with the same method from the F.S system. Both characteristic curves from F.S system and C.R system were analyzed. 3. Results : In the F.S system, the best exposure condition of simple abdomen was 70kVp and 20mAs. In the CR system, with the fixed condition at 70kVp, the image densities of human organs, such as liver, kidney, spleen, psoas muscle, lumbar spine body and iliac crest, were almost same despite different environments (3.2mAs, 8mAs, 12mAs, 16mAs and 20mAs). However, when the exposure conditions were over or under (below) 12mAs, the images between the abdominal wall and the directly exposed part became blurred because the gap of density was decreased. In the C.R system, while the volume of mAs was decreased, an artifact of quantum mottle was increased. 4. Conclusion : This study shows that the exposure condition in the C.R system can be reduced 40% than in the F.S system. This paper concluded that when the exposure conditions are set in CR environment, after the analysis of equipment character, such as image processing system(EDR : Exposure Data Recognition processing), PACS and so on, the high quality of image with maximum information can be acquired with a minimum exposure dose.

• Journal of the Korean Society of Radiology
• /
• v.15 no.3
• /
• pp.321-327
• /
• 2021

Wrist PA-grip view is used to diagnose triangular fibrocartilage complex (TFCC) tear because it can easily diagnose damage to the surrounding wrist ligaments. However, despite advances in radiology equipment, distortion of images due to geometric elements still has many limitations. In this paper, we propose a method that can minimize the distortions of images by analyzing the distortions occurring in the wrist PA-grip view. A source of image distance (SID) were set at 130 cm and 150 cm for comparison with 110 cm. Depending on the SID, the phantom of wrist was moved at 0, 2, 4, 6, 8, and 10 cm in the X-axis and Y-axis directions, respectively. For quantitative evaluation, the difference of distance between the radius and ulna was measured in picture archiving and communication system (PACS) system. As a qualitative evaluation, survey was conducted among 20 radiologic technologists who examined the Wrist PA-grip view. The Kruskal Wallis test was performed to compare the distortion according to the phantom movement in the X-axis and Y-axis directions based on the SID, and the Tukey test was performed as a post-test. In the quantitative evaluation results, the measured values obtained in the X-axis was not significantly different in all groups (p>0.05). The measured values obtained in the Y-axis was significantly different in the most groups (p<0.05). Therefore, to reduce distortion while maintaining image quality, we recommend what examine the SID at 150 cm than 110 cm.

• Journal of the Korean Society of Radiology
• /
• v.81 no.6
• /
• pp.1523-1528
• /
• 2020

Partial anomalous pulmonary venous return (PAPVR) is a rare congenital cardiac anomaly that can be difficult to detect and often remains undiagnosed. PAPVR is diagnosed using non-invasive imaging techniques such as echocardiography, CT, and MRI. Image data are reviewed on a 2-dimensional (D) monitor, which may not facilitate a good understanding of the complex 3D heart structure. In recent years, 3D printing technology, which allows the creation of physical cardiac models using source image datasets obtained from cardiac CT or MRI, has been increasingly used in the medical field. We report a case involving a 3D-printed model of PAPVR with a biatrial connection. This model demonstrated separate drainages of the right upper and middle pulmonary veins into the lower superior vena cava (SVC) and the junction between the SVC and the right atrium, respectively, with biatrial communication through the right middle pulmonary vein.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.793-799
• /
• 2018

As interest in artificial intelligence has increased, artificial intelligence has been actively studied in the medical field. In Korea, artificial intelligence has been applied to medical imaging devices such as X-ray imaging, Computer Tomography and Magnetic Resonance Imaging and artificial intelligence capable of acquiring radiation images of patients without radiologists in the future Medical devices are expected to be invented. This study was an initial study on the automation of patient positioning in X - ray imaging. We used x-ray equipment and human phantoms to evaluate the positioning. The program used Visual Studio 2010 MFC and the image was in the size $1450{\times}1814$. The pixel values were converted to contrasts with values of 0 to 255 that can be visually recognized and output to the monitor. We developed a procedure algorithm program that predicts the angle of the output image through three pixel coordinate values and induces the patient to perform correct positioning according to the voice guidance according to the angle. In the next study, we will study the artificial intelligence to grasp the structure itself and calculate the angle, rather than conveying the reference of coordinates to artificial intelligence. In the future, it is expected that it will be helpful in the study of artificial intelligence from shooting to positioning through the automation of positioning.

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.459-464
• /
• 2019

In order to minimize the radiation exposure dose of the thyroid site at dental cone-beam computer tomography, a protector using a Bolus was prepared, and the radiation shielding effect and the appropriateness of the image were evaluated. Using a dental cone-beam computed tomography (CBCT), a glass dosimeter was attached to the left and right sides of the thyroid for a dental radiation phantom, and the radiation dose was measured. The absorbed dose for each shield was measured by another method to 10 mm, 20 mm, and 30 mm-thickness, respectively. Eight evaluators evaluated whether or not the medical image is appropriate. When using a 30 mm Bolus shield at the left thyroid site, the resulting value is reduced by an average of $342.67{\mu}Gy$ by 20.7% from the average value of $431.22{\mu}Gy$ measured without using a Bolus shield, the right thyroid site In the case of using 30 mm Bolus shield, it showed a dose reduction effect of 21.9% with an average of $424.56{\mu}Gy$. The adequacy of the medical image was judged to be usable by both evaluators. In conclusion, the dental cone-beam computerized tomography can be used as a useful shielding material because it has a radiation shielding effect and it is possible to treat the diagnosis of the bolus protector in the thyroid without any obstruction shade in order to minimize the radiation dose.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.60-65
• /
• 2007

The radiologic imaging device was implemented. It can be installed in an ambulance or used when an accident happens. After an equipment which generates X-ray generating unit with a tube in DC 12[V] had been made, a trait experiment using an oscilloscope was made. An experiment was carried out where the generated X-ray was saved as a form of a file using a digital detector. In this experiment, as a result of generating X-ray and detecting it using a digital detector, 1.67[MB]-, jpg- radical rays information could be saved. One distinct advantage of the developed radiologic imaging device is the fact that we can efficiently deal with emergency cases too far from the hospital, difficult to diagnose but treat simultaneously. By using the radiologic imaging device at the urgent scene of an accident or in a moving ambulance, we can provide the patient's X-ray information with the emergency medical specialist who is in the emergent medical center and have the patients prescribed and treated appropriately. As a result the developed emergency medical treatment can be expected.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1765-1772
• /
• 2012

Success rate of transplantation of body organs improved due to development of medical equipment and diagnostic technology. In particular, a liver transplant due to liver dysfunction has increased. With the development of image processing and analysis to obtain the volume for liver transplantation have increased the accuracy and efficiency. In this thesis, we try to reconstruct the regions of the liver within three dimensional images using the mevislab tool, which is effective in quick comparison and analysis of various algorithms, and in expedient development of prototypes. Liver is divided by applying threshold values and region growing method to the original image, and by removing noise and unnecessary entities through morphology and region filling, and setting of areas of interest. It is deemed that high temporal efficiency, and presentation of diverse range of comparison and analysis module application methods through usage of MeVisLab would make contribution towards expanding of baseline of medical image processing researches.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.1 s.39
• /
• pp.139-145
• /
• 2006

Feature extraction technique in digital images has many applications such as robot vision, medical diagnostic system, and motion video transmission, etc. There are several methods for extracting features in digital images for example nonlinear gradient, nonlinear laplacian, and entropy convolutional filter. However, conventional convolutional filters are usually not efficient to extract features in an image because image feature formation in eyes is more sensitive to dark regions than to bright regions. A few nonlinear filters using difference between arithmetic mean and harmonic mean in a window for extracting sketch features are described in this paper They have some advantages, for example simple computation, dependence on local intensities and less sensitive to small intensity changes in very dark regions. Experimental results demonstrate more successful features extraction than other conventional filters over a wide variety of intensity variations.