• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.23-28
• /
• 1999

Rectangular waveguide slot antenna which has simple structure, high efficiency, high trust and small size, is extending in a field of application such as many Radar and Microwave communication. A slot cut into a wall of waveguide is propagated electromagnetic wave to free space it interrtupts the flow of current inner conductor of waveguide. Therefore incident of slot, cutdepth, width, length, i.e. are important parameter of characteristic change of the slot antenna. Result from difficulty of theoretical analysis about slot frequently experimental measured data useful design and manufacture have been accomplished. In this paper, we find the suitable method of analysis that compare two analysis results with measured result of established literature - admittance of slot be solved by propagated power from electric field distribution of slot and mode current computation and accomplishment of computable chart which hasresonant length and cutdepth, incident of slot, i.e. and use the HFSS which applyed finite-element method obtain equal slot analyed method.

• Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.254-258
• /
• 2006

Vitellogenin has been known as a potent biomarker protein for the estrogenic activity in fish exposed to endocrine disruptors. In this study, a piezoelectric immunosensor making use of an anticarp vitellogenin antibody and an AT-cut quartz crystal microbalance as the biological component and transducer was prepared, followed by its application to the analysis of carp vitellogenin as follows. Antibody immobilization was conducted by chemisorption of a thiolated antibody with a heterobifunctional thiolation cross-linker, sulfosuccinimidyl 6-[3-(2-pyridyldithio)propionamido]hexanoate. The reaction buffer for the immunosensor system was optimized as 0.1 M sodium phosphate (pH 7.4). Concentration-dependent sensor responses were obtained in the vitellogenin concentrations ranging from 0.4864 to 486.4000 nM, with a linear correlation between vitellogenin concentration and frequency shift in double-logarithmic scale. The limit of detection of the immunosensor for carp vitellogenin was presumed as 0.4864 nM.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.601-608
• /
• 2017

In the fourth industrial revolution, drones are an important element to lead the industry by converging with information technology. Drones are developing various technologies by combining with communication / navigation / traffic management technology, control and detection / avoidance technology, sensor technology, SW and application technology. However, there are various problems in order to settle the drone technology. In this paper, it will be examined the problems of application of drones through application fields of drones, domestic and foreign cases, and core technologies of drones. The growth of the drone market requires improvement of laws and institutions. This paper proposed security vulnerability, privacy and safety problem in wireless communication, and present technical and management problems for drone service in the Korean environment in particular.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.6 no.1
• /
• pp.1-24
• /
• 1969

Added masses of two-dimensional cylinders of curvilinear-element sections with chines, which are similar to marked V character ship sections with either single or double chines, oscillating at high frequency in a free surface of an ideal fluid are calculated for both vertical and horizontal vibration by employing two particular two-parameter families of the conformal transformation. The numerical results are graphically presented in the forms of added mass coefficient curves in terms of the sectional area coefficient and the half beam-draft ratio together with the section contours derived with the employed transformations, and discussed in comparision with those of the Lewis forms and of straightline-element sections with single chine for vertical vibration, and, for horizontal vibration, with those of the Lewis forms.

• Journal of Digital Convergence
• /
• v.17 no.5
• /
• pp.353-360
• /
• 2019

The research paper for lacquer design furniture design development utilizing the shape of the clean vase investigates and analyzes the vase ceramic deformities of the most prominent Qing's era in Chinese ceramic history, and shows it in a vase to find the basic form of the vase ceramic of that era Applied the shape of the vase itself, and tried to provide a plastic basis for the design of lacquer works. Focusing on the shape of the shaping element shown in the Qing Dynasty vase, we analyze the type of the type, and examine the shape of the bottle china in China Qing period through the investigation of materials used and various documents. Based on the data obtained through the experiment, the design of furniture to sit by applying Chinese clean vase ceramic malformation to Hyopjotalte(Ottchil) lacquer ware in the lacquer making method.

• Korean journal of applied entomology
• /
• v.15 no.3 s.28
• /
• pp.111-126
• /
• 1976

Regional differences in economic importance of the four species of rice leafhoppers, viz., Laodelphax striatellus, Nephotettix cincticeps, Nilaparvata Iugens and Sogatella furcifera, were analyzed and discussed based on population surveys conducted in Suweon and in southern and south-western coastal areas. The economic importance of L. striatellus and N. cincticeps, which are found throughout the year in Korea, seems to be less in middle regions. This is believed due to effective natural control through severe winter climate, cultural practices in rice and barley growing, and natural enemies such as spiders. However, the economic importance of these two species is significantly greater in southern regions with a less severe winter climate, and where cultural practices in rice and barley favour synchronization between the life cycles of insects and the seasonal succession of host plants. with regard to N. lugens and S. furcifera, which cannot overwinter in Korea, initial populations are the result of long distance migration across the East China Sea. Weather elements related to their migration result in more abundant immigrants of these two species in southern than in middle regions. Thus, different policies are needed for the integrated control of rice leafhoppers in middle and southern Korea.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.3
• /
• pp.230-237
• /
• 2007

Titania nanotube(TiNT) and CdS sol were synthesized by hydrothermal reaction under strongly basic condition and by precipitation reaction of $Cd(N0_3)_2$ and $Na_2S$ aqueous solutions, respectively. After preparing a series of CdS-TiNT composite films on $F:SnO_2$ conducting glass with variation of the mole ratio (r) of TiNT/(CdS+TiNT), their visible light absorption, photocatalytic activities for hydrogen production, and the photocurrent generation were examined. In general, this CdS-TiNT series showed lower photocatalytic activities and photocurrent generation under Xe light irradiation compared to their counterparts, i.e., CdS-$TiO_2$ particulate series. It appeared that TiNTs are not so effective photocatalyic material in spite of their larger specific surface areas compared to $TiO_2$ nanoparticles, because they indicate a poor crystallinity and less intimate interaction or contact with CdS particles owing to the tubular morphology and an easy agglomeration among themselves.

• Journal of the Korean Magnetics Society
• /
• v.14 no.4
• /
• pp.149-161
• /
• 2004

The fusion of nano technology and information technology is essential to sustain the present growth rate and to induce new industry in this ever-growing information age. Considering Korean industry whose competitiveness lies heavily on information related technologies, this field will be inevitable for future. Nano materials can be described as novel materials whose size of elemental structure has been engineered at the nanometer scale. Materials in the nanometer size range exhibit fundamentally new behavior, as their size falls below the critical length scale associated with any given property. " Bottom-up' techniques involve manipulating individual atoms and molecules. Bottom-up process usually implies controlled or directed self assembly of atoms and molecules into nano structures. It resembles more closely the processes of biology and chemistry, where atoms and molecules come together to create structures such as crystals or living cells. Nano scale sensors are included in the electronics area since the diverse sensing mechanisms are often housed on a semiconductor substrate and usually give rise to an electronic signal. The application of nano technology to the chemical sensors should allow improvements in functionality such as gas sensing. In this presentation, we will discuss about the nano scale information materials and devices fabricated by using the organic/inorganic nano templates.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.1
• /
• pp.53-61
• /
• 2021

Introduction : OMFT is a therapeutic technique based on sensorimotor, motor control and motor learning, and its major goal is to improve oral motor function. The oral motor conceptual hierarchical development is divided into 5 steps: 1) sensorimotor, 2) movement integration, 3) structural movement, 4) functional oral motor, and 5) comprehensive oral motor. Discussion : The OMFT consists of 3 techniques, 10 categories, and 50 sub-item. 1) Warming up technique: 2 categories, 12 sub-item, warming up by sensory awareness and adaptation, therapy situation adaptation, neck movement; 2) Key point technique: 7 categories, 30 sub-item, oral motor facilitation and increasing chewing skill by direct stroke of oral structures such as the face, lips, cheeks, gum, jaws, and tongue; 3) Application technique: 1 category, 8 sub-item, facilitate food intake and swallowing. Conclusion : The goal of this article is to introduce 3 techniques, 50 sub-item of OMFT, as a comprehensive oral motor therapy method, for application to clients. This article provides information that will help oral motor specialists in treating clients with oral motor problems more effectively and professionally.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.1
• /
• pp.67-76
• /
• 2008

Implant requires long lasting, strong osseointegration using bio-mechanical interlocking by bone ingrowth. In regarding the size level for bone ingrowth, the micro-patterning would enhance bone response. Micro-patterning can increase the area contacting the bone tissues. Therefore, it may distribute the load to the surrounding bone tissue, more effectively. This study compared and analyzed the load distributing effect with the shape and number of micro-patterning. For the optimal comparison of threads, the assumptions different from general finite element analysis model were made. It was assumed that the implant was axisymmetric and infinitely long. The implant was assumed to be completely embedded in the infinitely long cortical bone and to have 100% bone apposition. The implant-bone interface had completely fixed boundary conditions and received an infinitely big axial load. The condition of threads were as follows. The reference model 1 had conventional thread. Model 2 had 2 micro-patterns on the upper flank of the thread. Model 3 had 2 micro-patterns on the lower flank of the thread. Model 4 had 2 micro-patterns on the upper and lower flanks of the thread. Model 5 had 3 micro patterns on the upper and lower flanks of the thread. The results were as follows: 1. The thread with micro-patterns distributed stress better than the conventional thread. 2. The thread with micro-patterns on the lower flank distributed stress better than that with micro-patterns on the upper flank. 3. The thread with 3 micro-patterns distributed stress better than that with 2 micro-patterns, However, an area with stress concentration occurred.