• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1A
• /
• pp.39-48
• /
• 2012

This study deals with numerical determination of stress intensity factors of adhesively patch-repaired plates with cracks at V-shaped or semicircular notches. The p-convergent anisoparametric model are considered and then three-dimensional virtual crack closure technique is presented using formulations of anisoparametric elements. In assumed displacement fields of an element, strain-displacement relations and three-dimensional constitutive equations are derived with three-dimensional hierarchical shape functions expanded from one-dimensional Lobatto functions. Transfinite mapping technique is used to represent a circular boundary. The present model provides accuracy and simplicity in terms of stress concentration factor, stress distribution, the number of degrees of freedom, and non-dimensional stress intensity factor as compared with previous works in literatures. Stress intensity factors obtained by the three-dimensional virtual crack closure technique are estimated with respect to the variation of width of finite plate, radius of notch root, angular inclination of V-shaped notch, and crack length.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.117-122
• /
• 2000

In this paper the stress intensity factor under uniform pressure in the arbitrarily-shaped plane crack configuration transformed elliptic crack by Mobius mapping are determined. Using Dyson's formula Boussinesq-Papkovich potentials for mode I deformation are constructed. In the example the stress intensity factors are approximately calculated by least square method.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.108-115
• /
• 1992

이종재료의 접합면에 수직으로 존재하는 크랙에 대하여 경계요소 해석을 수행하여, 그 결과 실용가능한 수치 근사해을 얻을 수 있었다. 크랙을 정확히 모델링하기 위하여 크랙표면을 분리영역으로 하는 영역분할법을 채택하였으며, 해의 정확성을 향상시키기 위하여 등매개 2차요소로의 경계분할과 함께 크랙선단에서 표면력의 특이성을 나타내도록 하였다. 응력확대계수는 크랙표면상 절점의 상대변위를 이용하여 결정하였다. 또한 이종 재료내 크랙에 대하여 응력확대계수를 간단히 구할 수 있는 간편해석법을 제안하고 이의 적용 가능한 범위를 제 시하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.2
• /
• pp.147-154
• /
• 2000

실온 대기 중에서 탄소강배관(STS370)의 피로시험을 행하였다. 배관에는 외부결함을 인공적으로 상정하여, 피로균열진전 및 관통의 거동, 균열형상, 누설 및 파단수명, 균열개구변위를 실험과 이론의 양면으로부터 비교·검토하였다. 특히, 배관의 벽두께 관통후에 있어서의 응력확대계수를 평가하기 위하여 새로운 식을 제안하였다. 피로균열이 관벽을 관통하기 전에 있어서는 판모델에 의한 Newman-Raju의 응력확대계수 평가식을 이용하므로서 aspect비와 누설수명 등 관통전의 피로균열성장거동을 평가할 수 있음을 나타내었다. 또한, 피로균열이 관벽을 관통한 후에 있어서는 본 논문에서 제안한 배관모델에 의한 응력확대계수의 평가식을 이용하여 관통후의 균열형상, 파단수명 및 균열개구변위 등 관통후의 피로균열성장거동을 평가하였다.

• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.33-39
• /
• 2000

Stress intensity factor after penetration was discussed experimentally using long surface pre-cracked specimens of aluminum alloy 5083. The propagation behavior evaluation of long surface crack by equation proposed at penetration of short surface crack could be need modification to evaluate precisely because the error was high as aspect ratio is little. The modification of stress intensity factor with consideration of aspect ratio at penetration of long surface crack can be analyzed the behavior of crack penetration quantitatively.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.234-239
• /
• 2001

The stress intensity factors have been widely used in numerical studies of crack growth direction. However in many cases, omissive terms of the series expansion are quantitatively significant, so we consider the computation of such terms. For this purpose, we used the finite element method with isometric quadratic quarter-point elements. For examples, infinite square plate with a slant crack subjected to a uniaxial load is analyzed. The numerical analysis were performed for the wide range of crack tip element lengths and inclined angles. The numerical results obtained are compared with the theoretical solutions. Also they were accurate and efficient.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.806-812
• /
• 1988

When laser interference method is used to measure stress intensity factor with experiment, crack molded from teflon crack molding method is better than the crack manufactured through fatigue test. It is known that center distance between two indentations which is best for detecting the laser interference fringe order is about 80.mu.m with photodetector used in this research. Errors with measurement of stress intensity factor through laser interference are between 2% and 11%, therefore, experimental process and method developed in this research can be used with obtaining the more precision experimental data for stress intensity factors.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.4
• /
• pp.83-88
• /
• 1989

목재의 섬유방향에 경사진 균열의 모-드I과 모-드II의 혼합모-드파괴시의 파괴거동을 조사하기 위하여 라왕(Shorea Spp.)의 LA시스템에 있어서 서로 다른 경사각도를 가진 SEN시험편(Single edge notch specimen)에 대하여 휨 시험을 행하였다. 얻이진 결과는 혼합모-드파괴시, 모-드I응력확대계수$K_I$과 모-드II응력확대계수$K_II$간에 일정한 상호작용이 존재한다는 것을 나타내었다. 또한, 모-드I과 모-드II의 임계응력확대계수(Critical stress intensity factor) $K_{IC}$와 $K_{IIC}$ 이용하여 혼합모-드파괴시의 $K_I$과 $K_II$간의 상호관계를 규정할 수 있었으며, 이미 보고된 여러 실험식과 본 실험결과를 비교하여 가장 적합한 관계로서 아래와 같은 관계를 얻을 수 있었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.1
• /
• pp.53-64
• /
• 2000

Strain gage method is investigated to evaluate the mode I stress intensity factor. Two types of specimens for CT and three point bend specimen are used. Sharp notch of specimens is manufactured by wiring discharge machining. Strain gages signal from the crack tip region are used to calculate stress intensity factors. The results are compared with those of the ASTM E399 method and finite element analysis. The present experimental results coincide well with the data obtained from finite element analysis. Attached position of strain gage should be seriously considered during the application of this method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2226-2240
• /
• 1992

This paper studies the applicability of the method of caustics into anisotropic materials under mode I and mixed static loading conditions and introduces the procedure to obtain stress intensity factors(S.I.F.) in anisotropic materials by the method of caustics. The mapping equations for initial and caustic curves in anisotropic materials were introduced and their computer graphical images were compared to the experimental ones to check the validity of the mapping equations proposed in this paper. The agreement between them was found to satisfactory. Two kinds of method to determine S.I.F. in anisotropic materials by the method of caustics were proposed in this paper and applied into the orthotropic materials under various loading conditions. In the case of mode I loading condition, the S.I.F.'s obtained by this paper's methods were found to be quite similar to the results by other method, boundary element method(B.E.M) and in the case of mixed loading condtion, the S.I.F's by this paper and B.E.M. showed a little differences(2.2-24.4%) with respect to the slanted angle of crack.