• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1235-1241
• /
• 2001

An engineering estimation equation for the crack opening displacement(COD) is proposed for a complex cracked pipe, based on the reference stress approach. To define the reference stress, a simple plastic limit load analysis for the complex cracked pipe subjected to combined bending and tension is performed considering the crack closure effect in the compressive-stressed region. Comparison with ten published test data and the results from existing method shows that the present method not only reduces non-conservatism associated with the existing method, but also provides consistent and overall satisfactory results.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1163-1172
• /
• 2001

The two dimensional problem of a layered tribological system(TiN/Steel) containing a vertical surface breaking crack and subject to rolling contact is considered in this study. Using finite elements and stress extrapolation method, a series of preliminary models are developed. Preliminary results indicate that the extrapolation technique is valid to determine Modes I and II stress intensity factors for cracks. In the case of TiN/Steel medium, KI and KII were determined for variations in crack length, layer thickness, and load location. The results show that KII reaches maximum values when the contact is adjacent to the crack where Mode I stresses are compressive. KII values decrease with decreased crack length and significantly decrease for reduced layer thickness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1527-1529
• /
• 2000

본 연구는 펄스 정전 응력법을 이용하여 공간전하분포를 교류전압 하에서 측정을 하였다. 이와 동시에 교류 고전압에서의 방전발생과 방전패턴의 변화를 측정하고, 공간전하분포와 방전과의 상관관계를 분석하였다. 교류 전압에서의 공간전하는 교류 한 주기를 18$^{\circ}$ 간격으로 등분하여 각 위상에서 그 분포를 측정하였으며, 공간전하분포와 방전패턴 사이의 관계를 분석하였다 실험 결과 유전체 장벽 방전이 많이 일어나는 위상에서의 공간전하분포 역시 크게 변하는 것을 볼 수 있었다. 이러한 사실을 통해 공간전하분포 특성이 유전체 장벽 방전 특성의 연구에 있어서 중요한 부분임을 알 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.613-616
• /
• 1999

Polyehtylene[PE] in polymer insulation materials of used power cable have carried out in abundance of experiment and study for electrical conduction, insulation breakdown, dielectric character and so on. when apply to field for power cable to make PE, application of DC withstand test to put in practice for inspection is get to effect accumulated space charge. In this paper, to make use of Pulsed Electro-Acoustic(PEA), It is analysis to take shape space charge under AC and DC, clear up the point at issue for DC withstand test impressing

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3176-3183
• /
• 2010

본 논문은 다축 하중을 받는 복합재 압력용기의 멀티 스케일 피로수명 예측 방법을 제시하였다. 멀티 스케일 접근법은 복합재료의 기본 구성재료인 섬유, 기지 및 섬유/기지 경계면의 거동으로부터 복합재 플라이, 적층판 및 구조물의 전체 거동을 예측한다. 멀티 스케일 피로수명은 거시적 응력 해석과 미시적 피로파손 해석을 통해 예측된다. 유한요소법을 이용하여 복합재 압력용기의 적층판에 가해지는 다축 피로하중을 구하며, 고전적층판이론을 이용하여 적층판의 플라이 응력을 계산하였다. 미소역학 모델을 이용하여 플라이 응력으로부터 각각 섬유, 기지 및 섬유/기지 경계면에 발생되는 응력을 계산하였다. 복합재 구성재료의 피로수명은 섬유에 대해서는 최대응력법을, 기지에 대해서는 등가응력법을, 섬유/기지 경계면에 대해서는 임계평면법을 사용하였다. 평균응력을 고려하기 위하여 수정된 Goodman 식을 적용하였다. 모든 피로하중에 의한 손상은 Miner 법칙을 이용하여 선형 누적이 되고, 이를 통해 최종 피로파손을 판단한다. 섬유와 기지의 물성값, 섬유체적비 및 와인딩 각도의 확률분포에 따른 복합재 압력용기의 피로수명 영향을 분석하기 위해 몬테카르로 시뮬레이션을 수행하였다.

• 한국강구조학회 논문집
• /
• 제16권2호통권69호
• /
• pp.257-265
• /
• 2004

line-type 유한요소법을 이용하여 불균등 단부 모멘트를 받는 보의 비탄성 좌굴 거동에 대하여 연구하였다. 잔류응력은 단순형과 다항식형 모델을 채택하였으며 잔류응력으로 인해 발생하는 단면의 불균등 항복을 고려하였다. 본 연구에서 얻어진 비탄성 횡-비틀림 좌굴에 대한 결과는 강구조편람의 허용응력법에 의한 설계 경우와 비교하였다. 결과적으로, 강구조편람에 의한 설계는 중지간 보에서 중간 브레이싱이 있는 경우나 없는 경우 모두 과설계가 됨을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1200-1209
• /
• 2003

In this paper, a unified methodology based on the local stress concept to estimate residual strength of locally thinned pipes. An underlying idea of the proposed methodology is that the local stress in the minimum section for locally thinned pipe is related to the reference stress, popularly used in creep problems. Then the problem remains how to define the reference stress, that is the reference load. Extensive three-dimensional finite element (FE) analyses were performed to simulate full-scale pipe tests conducted for various shapes of wall thinned area under internal pressure and bending moment. Based on these FE results, the reference load is proposed, which is independent of materials. A natural outcome of this method is the maximum load capacity. By comparing with existing test results, it is shown that the reference stress is related to the fracture stress, which in turn can be posed as the fracture criterion of locally thinned pipes. The proposed method is powerful as it can be easily generalised to more complex problems, such as pipe bends and tee-joints.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1170-1178
• /
• 2003

This paper provides approximate J estimates for off-centred, circumferential through-wall cracks in cylinders under bending and under combined tension and bending. The proposed method is based on the reference stress approach, where the dependence of elastic and plastic influence functions of J on the cylinder/crack geometry, the off-centred angle and strain hardening is minimised through the use of a proper normalising load. Based on published limited FE results for off-centred, circumferential through-wall cracks under bending, such normalising load is found, based on which the reference stress based J estimates are proposed for more general cases, such as for a different cylinder geometry and for combined loading. Comparison of the estimated J with extensive FE J results shows overall good agreements for different crack/cylinder geometries and for combined tension and bending, which provides sufficient confidence in the use of the proposed method to fracture mechanics analyses of off-centred circumferential cracks. Furthermore, the proposed method is simple to use, giving significant merits in practice.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1099-1106
• /
• 2002

This paper provides engineering J-integral and crack opening displacement (COD) estimation equations for circumferential through-wall cracked pipes under internal pressure and under combined internal pressure and bending. Based on selected 3-D finite element calculations for the circumferential through-wall cracked pipes under internal pressure using the idealized power law materials, the elastic and plastic influence functions for fully plastic J-integral and COD solutions are found as a function of the normalized crack length and the mean radius-to-thickness ratio. These developed GE/EPRI-type solutions are then re-formulated based on the enhanced reference stress method. Such re-formulation not only provides simpler equations for J-integral and COD estimations, but also can be easily extended to combined internal pressure and bending. The proposed equations are compared with elastic-plastic finite element results using actual stress-strain data, which shows overall excellent agreement.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1127-1134
• /
• 2002

The present paper provides an engineering J estimation equation for surface cracked plates under combined bending and tension. The proposed equation is based on the reference stress approach, and the most relevant normalising loads to define the reference stress for accurate J estimations are given for surface cracked plates under combined bending and tension. Comparisons with J results from extensive 3-D FE analyses, covering a wide range of crack geometry, plate geometry and loading combination, show overall good agreement not only at the deepest point but also at arbitrary points along the crack front. for pure tension, agreement between the estimated J and the FE results is excellent, even at the surface point. On the other hand, for pure bending and combined bending and tension, the estimated J values become less accurate for locations close to the surface point. Thus the results in this paper will be useful to assess short-term fracture or low cycle fatigue of surface defects in plates under combined bending and tension.