• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.27-34
• /
• 2016

A new algorithm for determining optimal accelerometer locations is proposed by using a frequency-domain Hankel matrix which is much simpler to construct than a time-domain Hankel matrix. The algorithm was examined through simulation studies by comparing the outcomes with those from other available methods. To compare and analyze the results from different methods, a dynamic analysis was carried out under seismic excitation and acceleration data were obtained at the selected optimal sensor locations. Vibrational amplitudes at the selected sensor locations were determined and those of all the other degrees of freedom were determined by using a spline function. MAC index of each method was calculated and compared to look at which method could determine more effective locations of accelerometers. The proposed frequency-domain Hankel matrix could determine reasonable selection of accelerometer locations compared with the others.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.75-89
• /
• 1993

The present paper describes an application of UA(Uncertainty Analysis) to seakeeping model test, basically according to the Performance Test Code of ASME(American Society of Mechanical Engineers), in which all the possible error sources involved in the preparation of test, calibration of instruments, data acquisition and analysis are quantified, and summed up with error propagation coefficients to the final uncertainties. The differences between the static test such as resistance and propulsion test and the dynamic test like seakeeping test are clearly identified during all the procedures of UA and asymmetric bias errors are considered. The DRE(data reduction equation) subject to present UA are the heave and pitch response amplitude operator and nondimensionalized absolute frequency. The usefulness of UA in seakeeping test were confirmed not only for quantifying errors and improving measurement accuracy but also for the validation of various seakeeping analysis tools.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.119-129
• /
• 1994

The aim of the present study is to derive an empirical formula relating the absorbed energy and the cutting length for longitudinally stiffened steel palates which are cut by a wedge, idealizing the ship bottom stiffened platings in groundings. This study is based on the test results and the investigations of some parameters affecting the cutting response, described in Part I. By dimensionless ana1ysis of the test results obtained in a quasi-static loading condition, the energy absorbed while a longitudinally stiffened plate is cut by a wedge is expressed as functions of the cutting length, the yield stress, the equivalent plate thickness and the wedge angle. Also, the dynamic effects are incorporated into the static formula such that the proposed formula can be applied to the impact loading situations. The validity of the proposed formula is checked by comparing with the results obtained by the other existing formulas or by the drop-hammer tests.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.11
• /
• pp.71-80
• /
• 2018

In this study, the seismic response of cut-and-cover box tunnels is evaluated from pseudo-static analyses and the fragility curves are derived. A series of site profiles were used to evaluate the effect of soil conditions. A total of 20 ground motions were used. The fragility curves were developed as functions of peak ground acceleration for three damage states, which are minor, moderate, and extensive states. The damage indices, defined as the ratio of the elastic moment to the yield moment, correlated to three damage states, were used. The curves are shown to greatly depend on the site profile. The curves are further compared to those derived in previous studies. The widely used empirically derived curves are shown not to account for the site effects, and therefore underestimate the response for soft sites.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.48-59
• /
• 2019

In recent years, the type of bridge where cables such as suspension bridge and cable-stayed bridge are the main factors in the construction of long-range bridges has been soaring. The effects of cables on these structures are very large, and for structural analysis, it is necessary to study the cable and the structural changes according to the mode characteristics of the cables. In particular, cables are directly connected to camber adjustment, which conveys load effects on girders to tower, and are important components in the overall structure, and since the initial tension on the construction is compared with the tension over time, this study was conducted to help identify the condition of the bridge's aging and abnormalities. Therefore, in this study, the characteristics of the mode from the mode analysis through the impact hammer to the mass of the cable and the change in the length of the cable are analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.93-98
• /
• 2019

On today, optical system are the next generation weapon systems being studied in many countries, starting from USA. One of the most important technologies in optical system is a high-speed automatic target tracking system that can continuously track high-speed moving small targets. This paper designs an automatic target tracking system based on a correlated trekker that is robust against rapid shape changes for fast moving targets and small targets at a distance. The proposed system showed about 98% success rate in response to the targets that are under a complex background such as drone, ranger, etc.

• Convergence Security Journal
• /
• v.19 no.1
• /
• pp.3-10
• /
• 2019

The 5G network is a next-generation converged network that combines various ICT technologies to realize the need for high speed, hyper connection and ultra low delay, and various efforts have been made to address the security vulnerabilities of the previous generation mobile networks. However, the standards released so far still have potential security vulnerabilities, such as USIM deception and replication attack, message re-transmission attack, and race-condition attack. In order to solve these security problems, this paper proposes a new 5G-AKA protocol with PUF technology, which is a physical unclonable function. The proposed PUF-based 5G-AKA improves the security vulnerabilities identified so far using the device-specific response for a specific challenge and hash function. This approach enables a strong white-list policy through the addition of inexpensive PUF circuits when utilizing 5G networks in areas where security is critical. In addition, since additional cryptographic algorithms are not applied to existing protocols, there is relatively little burden on increasing computational costs or increasing authentication parameter storage.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.6
• /
• pp.359-366
• /
• 2020

In this study, a simulation-based damage estimation method for helidecks is proposed using an artificial neural network. The structural members that share a connecting node in the helideck are regarded as a damage group, and a total of 37,400 damage scenarios are numerically generated by applying randomly assigned damage to up to three damage groups. Modal analysis is then performed for all the damage scenarios, which are selectively used as either training or validation or verification sets based on the purpose of use. An artificial neural network with three hidden layers is constructed using a PyTorch program to recognize the patterns of the modal responses of the helideck model under both damaged and undamaged states, and the network is successively trained to minimize the loss function. Finally, the estimated damage rate from the proposed artificial neural network is compared to the actual assigned damage rate using 400 verification scenarios to show that the neural network is able to estimate the location and amount of structural damage precisely.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.164-170
• /
• 2021

Research was conducted to analyze and improve the kinetic performance of offshore wind power generators. The shape used in this study was taken with reference to the previous paper, and the size of the repair area was designed at 80%, 60%, 40%, and 20%, respectively, and the exercise performance was confirmed accordingly. The sea state was calculated in Sea State 4, 5, and 6. In the calculation process, the calculation was performed using commercial computational hydrodynamics (ANSYS) and AQUA. In the case of overall exercise performance, it was confirmed that the smaller the size of the repair area, the smaller the exercise such as heave, roll, and pitch. However, it was confirmed that in the case of a shape in which the size of the repair area was rapidly reduced, there may be cases in which the restoration performance was not satisfied when the restoration calculation was performed. In addition, it was confirmed that there may be an appropriate repair surface depending on the sea condition.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.210-213
• /
• 2010

최근 사용자의 멀티미디어에 대한 요구의 증가가 VOD (Video-on-Demand) 서비스를 발전시키게 되었다. VOD는 엔터테인먼트나 원격 교육, 광고 및 정보 등 많은 분야에서 사용되고 있다. 이러한 VOD 서비스는 많은 디스크 I/O와 네트워크 I/O를 요구하며 기존 웹 서버 시스템과 비교했을 때 오랜 시간동안 서비스를 해야 하는 특징을 가지고 있다. 또한 VOD 서비스는 많은 네트워크와 디스크의 대역폭을 요구하며, 서비스의 QoS에 민감해서 사용자 응답시간이 길어지면 사용자 요청의 취소율이 높아지게 된다. 따라서 불만족스러운 서비스의 증가로 네트워크 부하만 증가하게 된다. 이러한 기존 웹 서버 환경과는 다른 부하의 패턴이 있는 VOD 서비스 환경에서는 부하를 균형적으로 분배하여 서비스의 QoS를 높이는 것이 매우 중요하다. 본 논문에서는 분산 VOD 시스템 환경에서 부하를 효율적으로 분산하기 위해 계층형 분산 VOD 시스템 모델과 사용자 요청 패턴의 히스토리와 유전 알고리즘을 기반으로 한 스케줄러를 제안한다. 본 논문에서 제안한 계층형 분산 VOD 시스템 모델은 서버들을 지역적으로 분산하고 제어 서버를 지역마다 설치하여 지역에 있는 VOD 서버들을 관리하도록 구성한다. 사용자 요청을 지역 서버군 내에서 분산시키기 위해서 히스토리를 기반으로 한 유전 알고리즘을 사용한다. 이러한 히스토리 정보를 기반으로 유전 알고리즘의 적합도 함수에 적용하여 VOD 시스템을 위한 유전 알고리즘과 유전 연산을 구현한다. 본 논문에서 제안한 부하 분산 알고리즘은 VOD 서비스 환경에서 사용자 요구에 대한 부하를 보다 정확하게 예측하여 부하를 분산할 수 있다. 본 논문에서 제안한 계층형 분산 VOD 시스템의 부하 분산 알고리즘의 성능을 테스트하기 위해 OPNET 기반 시뮬레이터를 구현한다. 라운드로빈(round-robin) 방식과 랜덤(random) 방식과의 비교 실험을 통해 본 논문에서 제안한 부하 분산 알고리즘의 성능을 평가한다. 비교 실험을 통해 본 논문에서 제안한 알고리즘이 보다 안정적인 QoS를 제공하는 것을 보여준다.