• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.300-303
• /
• 2005

Polyurethane multi-layer and foam multi-layer were prepared with PU1000 and PU2000 made by poly(propylene glycol) (PPG) having the molecular weight of 1000 and 2000 g/mol, respectively. The damping and transmission loss of these materials were compared with PU1000 used as a reference. The damping peak of polyurethane multi-layer was shifted to the lower temperature compared with PU1000, while the damping peak of polyurethane foam multi-layer was shifted to the higher temperature and broaden. In terms of noise reduction, the transmission loss of polyurethane multi-layer was effective at the specific frequency range such as less than 100 Hz and around 600 Hz compared with PU1000. The transmission loss of polyurethane foam multi-layer was most effective in the whole experimental frequency range.

• Composites Research
• /
• v.28 no.6
• /
• pp.389-394
• /
• 2015

The sound absorption coefficient and sound transmission loss of graphite intercalation compound (GIC) included epoxy composites were investigated. Epoxy resin was infused into the expanded GIC and the impedance tube method was employed to measure the sound absorption coefficient and sound transmission loss. Scanning electron microscopy photographs showed uniform distribution of the GIC in the epoxy matrix. The surface density of epoxy/GIC (20 wt%) composites decreased about 56% compared to that of pure epoxy. The sound absorption coefficient of composites increased about 3 times at the frequency range of 500~1000 Hz compared to the pure epoxy. The sound transmission loss of composites decreased with increasing the GIC content and it is attributed to the increase of pores in the composites.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1522-1529
• /
• 1991

본 연구에서는 균질판, 공기층, 흡음재등이 부착된 다층벽에 대한 음향투과손 실을 전기계의 희로망이론에 근거한 음향4단자법으로 해석하는 이론을 제안하고 여러 가지 다층벽에 적용하여 실측치와 비교.검토하여 제안한 계산법의 타당성을 확인하고 저 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.883-888
• /
• 2002

This study describes the limit and application of the two-microphone impedance tube method to the sound transmission loss measurement of several sound isolation materials with different physical properties. For the sound isolation materials having small flexural rigidity, it is shown that the two-microphone impedance tube method is validated to practically measure the sound transmission loss. For the sound isolation materials having large flexural rigidity, on the other hand, it is found that the two-microphone impedance tube method is no longer valid to measure the sound transmission loss because the regions of resonance and mass law are moved into the higher frequencies. In addition, in order to accurately measure the sound transmission loss of sound isolation materials, their size should be decided based on the consideration of the effect of acoustic excitation on their vibration response.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.253-260
• /
• 2016

In this paper, derivation of the STL (Sound Transmission Loss) of the double plates installed in an impedance tube is discussed using an analytic method, where an air cavity exists between the plates. Vibration of the plates and sound pressure field inside the tube are expressed in terms of infinite series of modal functions. Under the plane wave assumption, it is shown that consideration of the first few modes yields sufficiently accurate results, and locations of peaks and dips are investigated. It is determined that the peak frequencies of the double plates coincide with those of each single plate. When the two plates are identical, the STL of the double plates as well as that of the single plate become zero at the natural frequencies of the single plate. The location and amplitude of the dips are investigated using an approximation solution when the cavity depth is very small.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.5
• /
• pp.497-503
• /
• 2016

In this study, we formulate an acoustical topology optimization problem to optimally design a partition layout inside the expansion chamber of a muffler. The lower-limit insertion loss value at a target frequency is constrained, and the partition volume is selected as an object function. In this study, we calculate the insertion loss outside the duct, while to determine the noise-attenuation performance, we use the insertion loss value calculated inside the duct or transmission loss value obtained in a previous study. We employ the finite-element model for acoustical analysis, and we determine the transmission of an incident acoustic wave through each finite element using the functions of design variables that change continuously between "0" and "1." The rigid body elements, which totally reflect incident waves, build up partitions. Finally, we compare optimal topologies that depend on the target frequency and the allowed lower-limit value of insertion loss.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.315-322
• /
• 2012

In a tunnel, interior noise of a high speed train increases by 5dB~7dB. The reason is that the sound intensity of the acoustic field in the tunnel significantly increases by the reflected waves occurred in the closed space. Especially, the incident acoustic power largely increases on the outside of the compartment side panel and large transmission of noise is available through the side panel and the glass window. In this paper, the sound insulation strategy in the tunnel is proposed for the next generation high speed train under development. Specimens of the aluminum extruded panels, layered panels and double glazed window are manufactured and intensity transmission loss is measured according to ASTM E2249-02. Based on the measured data, problems in the sound insulation performance are diagnosed and the sound insulation strategy is reviewed on each panel and layered structures.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.191-194
• /
• 2004

This study Is an measurement and prediction of transmission loss through dash panel with multi-path in a vehicle. Measurement results of transmission loss are decided by sound power measured using the sound intensity method under locating a sound source in the anechoic room and reverberant room, respectively. Prediction one is decided by multi-path analysis of dash panel composed by a various part of materials and complicated shape. Finally, two results show a great agreement between measured and predicted transmission loss.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.735-740
• /
• 1998

Acoustic performance of DICT's acoustic laboratory was evaluated. As a result, background noise and inverse squre law of an anechoic room were satisfied with ISO 3745 standard value. Also, reverberation time and standard deviation of sound pressure level distribution in reverberation rooms were within maximum error limit that was ruled on ISO 3741.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.59-64
• /
• 1994

본 논문에서는 다중 유리창의 STL값을 예측하는 방법에 대해 연구하였다. 유리창의 크기는 무한하다고 가정하였으며 음향 4단자방법을 이용하였으나 기존의 모델과는 달리 음파의 입사는 오나전한 확산음장이 아닌 각도에 따른 변화가 있다고 가정하였으며 또한 지지부의 댐핑도 고려하였다. 본 연구에서 제시된 방법을 사용하여 이중 및 삼중창의 여러가지 경우에 대해 계측치와 비교하였다. 본 방법은 유리가 아닌 강판, 석고보다 등 일반적인 탄성체와 흡음재가 배열된 경우에도 적용이 가능하나 여러 계측치와의 비교를 통해 문제점 및 응용성에 대해서 언급하였다.