• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.68-74
• /
• 1999

Ths paper does acoustic detection of partial discharge using acoustic sensor in polymer. Time sequential rreasurement of acoustic emission characteristic obtained acoustic sensor deal with statistics process. and 5 characteristic quantities were introduced into this paper. Resulting fann analysis of $\psi$-AEA-n pattern (phase-acoustic emission amplitude-pulse number) and AE quantities ,it can know useful statistics quantities that AE average inception amplitude TEX>$(\overline{AEA_{inc}})$ and AE average maximum amplitude TEX>$(\overline{AEA_{max}})$ make diagnosis of the middle stage of deterioration, AE pulse number and AE average maximum phase $(\overline{\theta{max}})$ make diagnosis of the last stage of deterioration. it obtained that these AE quantities are useful for dias,mosis deterioration form experiment results.esults.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.532-540
• /
• 2013

In this paper, we propose the modified SED (Subband Energy Detection) which can assign weights adapting to the receiving signal level for the broadband energy detection in the passive SONARs. SED which is one of the broadband processing mainly employed by passive SONARs to detect a target is more robust against interference like multi signals or a clutter than CED (Conventional Energy Detection), but it degrades detection performance to assign weights independent of extracted extrema level of the receiving signal. Therefore, in this paper, the weighting method which can efficiently assigns rewards or penalties adapting to extracted extrema level of the receiving signal is proposed. In order to evaluate the performance of proposed method, we conducted experiments by using simulation and real ocean acoustic signal which is acquired from Yellow Sea. From the experiments, our proposed method has shown better performance than conventional SED.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.84-90
• /
• 2000

The bearing detection of radiated target noise is very important at underwater acoustic measurement and passive detection. It differs the arrival tines of received signal at each sensor. Therefore, the bearing can be obtained from the time delay. This paper proposes a new algorithm using the RLSL adaptive filter for TDE. The proposed method is particularly attractive when there is a limitation of priori information about the received signal spectra and when the delay is subject to variation. As the simulation results, it is shown that the proposed algorithm has better convergence characteristics and TDE speed, and so that the usefulness of proposed algorithm is confirmed.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.500-510
• /
• 2023

Passive sonar signals mainly contain both normal and abnormal signals. The abnormal signals mixed with normal signals are primarily detected using an AutoEncoder (AE) that learns only normal signals. However, existing AEs may perform inaccurate detection by reconstructing distorted normal signals from mixed signal. To address these limitations, we propose an abnormal signal detection model based on a Recurrent Neural Network (RNN) and vector quantization. The proposed model generates a codebook representing the learned latent vectors and detects abnormal signals more accurately through the proposed search process of code vectors. In experiments using publicly available underwater acoustic data, the AE and Variational AutoEncoder (VAE) using the proposed method showed at least a 2.4 % improvement in the detection performance and at least a 9.2 % improvement in the extraction performance for abnormal signals than the existing models.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.29-34
• /
• 1997

The prediction of detection range of a passive sonar system is essential to estimate the performance and to optimize the operation of a developed sonar system. In this paper, a model for the prediction of detection range in a range-dependent ocean environment based on the sonar equation is developed and tested. The prediction model calculates the transmission loss using PE propagation model, signal excess, and the detection probability at each target depth and range. The detection probability is integrated to give the estimated detection range. In order to validate the developed model, two cases are considered. One is the case when target depth is known. The other is the case when the target depth is unknown. The computational results agree well with the previously published results for the range-independent environment. Also,the developed model is applied to the range-dependent ocean environment where the warm eddy exists. The computational results are shown and discussed. The developed model can be used to find the optimal frequency of detection, as well as the optimal search depth for the given range-dependent ocean environment.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.300-304
• /
• 2017

In a cylindrical sonar, a conventional broadband energy detector has limitations in the separation of adjacent targets. In this paper, a broadband detection algorithm using cross-correlation is applied to the cylindrical sonar to improve the bearing resolution. The proposed algorithm uses split beamforming before broadband detection processing using cross-correlation to generate half beams. The time delay obtained from the peak of correlation between half beams is used to estimate the bearing of target. Simulations demonstrate the improved performance of the proposed algorithm against the conventional algorithm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1125-1130
• /
• 2014

In this paper, we propose a sound reception system against surrounding noise for ships based on digital signal processing technologies. In order to suppress unwanted surrounding noises, a digital band-pass filter is designed, which the pass-band of the filter is between 70Hz to 820Hz. Also, we develope a sound direction indicating algorithm with 4 microphones. After filtering the audio signals from 4 microphones, the developed sound direction indicating algorithm can indicate 8 directions. In addition, we implement prototype board for the sound reception using a digital signal processor chip and audio codecs, and verify the proposed algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.4
• /
• pp.288-294
• /
• 2015

The fiber optic Sagnac interferometer is well established as a sensor for detection of physical perturbations such as acoustic and vibration. In this paper acoustic signals generated in the cylindrical cavity submerged in transformer oil were measured by the fiber optic sensor array in one Sagnac loop. Two different external sound frequencies, $f_1$ and $f_2$, were applied to the sensor array simultaneously by using piezoelectric with frequency range from 5 kHz to 90 kHz. Based on the experimental results, fiber optic sensor detected harmonic series of applied sound frequency such as $f_1$, $f_2$, $2f_1$, $2f_2$, ${\mid}f_1-f_2{\mid}$, ${\mid}f_1+f_2{\mid}$. Suggested fiber optic sensor array can be applied to monitor physical quantities such as internal sound pressure and vibration due to partial discharge in the real electric transformer system.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.4
• /
• pp.225-231
• /
• 2014

This paper suggests an algorithm to improve the tracking performance for an underwater acoustic target using the feedback information of acoustic feature of a target. While conventional tracking algorithms use detected acoustic signals only, the proposed algorithm uses detected acoustic signals and target feature information as well. Since the proposed algorithm tracks only the selected measurements using target feature information, it prevents onset of unnecessary tracks and improves tracking performance for target of interest. Furthermore, it optimizes tracking parameters for the target of interest and guarantees robustness and consistency of the track. Some simulations are performed to demonstrate the improved tracking performance of the proposed algorithm.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.475-478
• /
• 2004

본 논문에서는 multistatic 소나망의 효과도 분석을 하였다. 특히 본 논문에서는 multistatic 소나망의 탐지 성능 분석을 통해 효용성을 알아보았다. Multistatic 소나망은 송/수신기가 분리된 일종의 다중 분산 센서 시스템으로, 최적의 탐지 성능을 갖기 위해서는 적절한 융합 규칙 및 센서 배치가 필요하다. 분산 센서 융합 기법으로 bayesian 결정 기법을 기반으로 한 융합 기법을 적용하였으며, 실제 해양 환경하에서의 탐지 성능 분석을 위해 개선된 bistatic 표적 강도 모델과 거리 종속 전송 손실 모델을 이용한 multistatic 소나망 탐지 모델을 제안하였다. 기존 소나망과의 모의 비교 실험을 통해 multistatic 소나망의 우수성을 입증하였다.