• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.97-100
• /
• 2000

정합장처리(matched-field processing)는 실제 음향자료와 복제음장과의 공간 coherence를 이용한 음장의 역추정 방법이다. 광대역 스펙트럼을 가지는 음원의 경우 협대역 단일 주파수별로 정합장 출력을 계산한 후, 각 출력을 더하는 incoherent 광대역 정합장처리를 사용하였으나, 그 경우 수신기들과 주파수들간의 상호 공간과 주파수 정보를 사용치 못하므로 음원 위치추정 성능이 저하된다. 본 논문에서는 광대역 스펙트럼의 여러 주파수를 사용하여 확장된 CSDM(cross-spectral density matrix)을 구성하여 coherent 정합장처리를 구현하고, 각 정합장처리 기법에 대한 음원 위치추정 성능을 분석하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.602-607
• /
• 1997

원심팬의 소음해석 기법은 Lighthill 방정식을 풀어야 하는 어려운 작업이기 때문에 아직 해석된 예가 드물다. 그래서 본 연구에서는 이미 개발한 움직이는 쌍극에 의한 소음 계산 기법을 이용해서 원심팬의 소음을 자유공간에서 계산한다. 닫힌 공간내의 음장은 경계요소법 혹은 유한요소법으로 많이 연구가 되어 왔다. 본 연구도 일반적으로 많이 사용되는 경계요소법을 이용한다. 이 세가지 방법은 원심팬에 의한 유동/음원 특성을 계산하고, 계산된 음원특성을 이용해서 경계요소법으로 전체 음향장을 계산하는 순서로 수행된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.3
• /
• pp.34-40
• /
• 2008

Acoustic design parameters of a half-wave resonator are studied experimentally for acoustic stability in a model chamber. According to the standard acoustic-test procedures, acoustic-pressure signals are measured. Quantitative acoustic properties of damping factor and sound absorption coefficient are evaluated and thereby, the acoustic-damping capacity of the resonator is examined. The diameter and the number of a half-wave resonator, its distribution, and the diameter of an enclosure are selected as the design parameters for optimal tuning of the resonator. Aroustic-damping capacity of the resonator increases with its diameter. When the open-area ratio of the resonator exceeds the optimum value, over-damping appears, leading to the decrease in the peak absorption coefficient and the broadening of absorption bandwidth. As the resonator diameter increases, optimum open-area ratio decreases.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.82-85
• /
• 2008

A Helmholtz resonator is applied to control high frequency combustion instability in liquid rocket engine. Damping characteristics of the Helmholtz resonator are investigated by the flow characteristic and its design. To simulate combustion instability, resonance in a test section(with fixed volume) is made by a pressure pulsator, and then damping characteristics are investigated. Its orifice length and diameter are selected as the design parameters and flow rates are varied to reveal the effect on damping characteristics. The experimental results show that a Helmholtz resonator is also working with flows. When length and diameter of an orifice are small, the tuning frequency increases as the flow velocity increases.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.4
• /
• pp.257-263
• /
• 2015

Acoustic identification of inner materials in a single-layer cylindrical shell is investigated with acoustic resonance theory. The theoretical resonance peak frequencies for a cylindrical shell are little affected by the density variation, but remarkably changed by the sound speed variation of inner materials. Such acoustic dependency can be utilized to identify inner materials in a cylindrical shell. Acoustic resonance spectrogram for a single-layer cylindrical shell is theoretically plotted as functions of normalized frequency and sound speed of inner materials. The inner materials can be acoustically identified by overlapping acoustic resonance peaks from measured backscattering sound field on the spectrogram. To experimentally confirm this method, backscattering sound field of cylindrical shell filled with water, oil or ethylene glycol was measured in water tank. The inner materials could be identified by acoustic resonance peaks of the backscattering sound field monostatically measured with a transduce of 1.05 MHz center frequency.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.6
• /
• pp.301-302
• /
• 2005

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.565-568
• /
• 2004

본 연구는 최근에 완공한 안산문화예술회관의 다목적 공연장의 음향설계부터 시공과 완공후의 음향실험을 통한 평가에 이르기까지의 일련의 음향설계 및 시공의 과정을 소개하고 설계시의 음향설정치와 완공 후 음향측정에 의한 음향성능을 비교함으로서 다목적홀의 음향에 대한 종합적인 평가를 시행하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.46-53
• /
• 2017

This paper deals with an acoustic model for a lean premixed gas turbine combustor composed of three stages: premixing chamber, nozzle and flame tube. Our model is given as an acoustic transfer function whose input is a heat release rate perturbation and output is a velocity perturbation at a flame location. We have shown that the resonance frequencies are functions of three round-trip frequencies of acoustic wave in each stage, and area ratios between stages. By analyzing poles of the acoustic transfer function, we could characterize resonant frequencies and their dependency on various system parameters of a combustor. It was found that our analytic findings match with existing numerical and experimental results in literature.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.28-37
• /
• 2002

Acoustic behavior in combustion chamber with acoustoc cavity is numerically investigated by adopting linear acoustic analysis. Helmholtz-type resonator is employed as a cavity model to suppress acoustic instability passively. The tuning frequency of acoustic cavity is adjusted by varying the sound speed in acoustic cavity. Through harmonic analysis, acoustic pressure responses of chamber to acoustic oscillating excitation are shown and the resonant acoustic modes are identified. Acoustic damping effect of acoustic cavity is quantified by damping factor. As the tuning frequency approaches the target frequency of the resonant mode to be suppressed, mode split from the original resonant mode to lower and upper modes appears and thereby damping effect is degraded significantly. Considering mode split and damping effect as a function of tuning frequency, it is desirable to make acoustic cavity tuned to maximum frequency of those of the possible splitted upper modes.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.207-210
• /
• 1999

서양음악의 음향학적인 측면에서의 연구는 오랜 기간 동안 진행되어왔다. 이를 통해 콘서트홀의 음향학적 특성을 평가할 수 있는 객관적 지표들을 제시할 수 있었다. 하지만 국악에 있어서는 공연장에 대한 음향학적인 지표가 공식화된 것이 없고, 게다가 지표를 찾기 위한 충분한 국악전용 공연장의 수가 부족하다. 따라서 본 논문에서는 국립국악원 예악당의 모델을 기초로 한 컴퓨터 모의실험을 통해서 얻어진 가상 국악공연장을 바탕으로 RT, Warmth, IACC, ITDG 등의 4가지 지표를 가지고 각기 다양한 시료를 제작하여 청취실험을 실시하였다. 그 결과 서양음악과는 다른 경향의 RT, Warmth 선호도를 추출할 수 있었다.