• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1229-1236
• /
• 2009

Puretone audiometer, which is a machine used for measuring the minimum hearing threshold, can be cost-effectively implemented using computer with sound card and software. In this paper, we describe a puretone audiometer which has been designed and implemented based on a general PC with sound card. It supports air conduction and bone conduction test taking with automatic masking. It also provides multiple modes consisted of self-test, auto-test and manual test mode. Such multiple modes makes it possible to use in various environments like as home and/or hospital. Through measure of waveform of output voltage and sound pressure, we verified that puretone audiometer of this paper properly operates.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.10
• /
• pp.777-784
• /
• 2003

Acoustic response control of a corner-pinned plate using piezoelectric wafers was studied, both theoretically and experimentally Three different sizes of aluminum alloy plates were used and available ball joints were employed to hold the plate at the four corners. The plate with the largest aspect ratio showed the largest and most clear responses to the acoustic excitation in the range of frequencies (0∼200 Hz), and sound pressure levels (80∼100 dB) as predicted. The reduction of the acoustic response of the plate by piezoelectric actuator was very significant, more than expected, but abatement of the sound transmission through the plate was only slightly altered by the piezoelectric actuator. This work is an original work extending earlier work with doors excited by acoustic fields. The important difference is the used of ball joints to simulate the joints.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.395-402
• /
• 2016

In this paper, a wideband adaptive beamforming approach for an acoustic vector sensor linear array is presented. It is a very important issue to estimate the stable covariance matrix for adaptive beamforming. In the conventional wideband adaptive beamforming based on coherent signal-subspace (CSS) processing, the error of bearing estimates is resulted from the focusing matrix estimation and the large number of data snapshot is necessary. To alleviate the estimation error and snapshot deficiency in estimating covariance matrix, the steered covariance matrix method in the pressure sensor is extended to the vector sensor array, and the subarray technique is incorporated. By this technique, more accurate azimuth estimates and a stable covariance matrix can be obtained with a small number of data snapshot. Through simulation, the azimuth estimation performance of the proposed beamforming method and a wideband adaptive beamforming based on CSS processing are assessed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.94-99
• /
• 2007

Many cases of acute cardiac shock and cardiac arrest in emergency room and ICU have been increasing. In this case, ECMO with centrifugal pump has been used generally. However, due to the heavy weight and big size, the system is not adequate for emergency cases. And other defects of this system are that membrane oxygenator's pressure is high and blood are exposed to the air. There was some tries of ECMO using pulsatile pump, but it was found that the weak point of these system is high peak pressure and hemolysis. The mechanism of twin pulsatile pump is that Membrane oxygenator Outlet Pump(MOP) make negative pressure when Membrane oxygenator Inlet Pump(MIP) provides high positive pressure, and the negative pressure will decrease positive pressure of Membrane Oxygenator. Our group analyzed this advantage through In-Vitro and 12 Cases In-Vivo test.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.1
• /
• pp.35-39
• /
• 2001

Multibeam echosounder data, collected to investigate seabed features and topography, are usually subject to outliers resulting from the ship's irregular movements and insufficient correction for pressure calibration to the positions of beams. We introduce a statistical method which adjusts the outliers using the ARMA (Autoregressive Moving Average) technique. Our method was applied to a set of real data acquired in the East Sea. In our approach, autocorrelation of the data is modeled by an AR (1) model. If an observation is substantially different from that obtained from the estimated AR (1) model, it is declared as an outlier and adjusted using the estimated AR (1) model. This procedure is repeated until no outlier is found. The result of processing shows that outliers that are far greater than signals in amplitude were successfully removed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.4
• /
• pp.245-250
• /
• 2015

To verify the possibility of generating rattling noise from a motor on caliper brake system, a test was conducted using a caliper excited with vibrations similar to that in a vehicle running on actual roads; this test was conducted using a quiet shaker installed in an anechoic room. After several hours of external excitation, the test assembly was loosened, and the frequency of rattling noise generation increased. A microphone was used to record the generated noise. The measured signals were analyzed by conventional spectrum analysis. Since the noise is generated as an impact response, the advantages of employing Prony analysis was discussed, and the results were compared to those obtained using conventional fast Fourier transforms. The accuracy of Prony analysis was through endurance tests on different brake systems.

• Korean Journal of Remote Sensing
• /
• v.11 no.3
• /
• pp.129-145
• /
• 1995

SeaBeam2000, a multibeam echo sounder, is a new generation seabed mapping system of which a single swath covers an angular range of -60.deg. to 60.deg. from the vertical direction with 121 beams. It provides high-density and high-quality bathymetric data along with sidescan acoustic data. The purpose of the research is to develop a system for processing multibeam underwater acoustic and bathymetric data using digital signal processing techniques. Recently obtained multibeam echo sounder data covering a survey area in the East Sea of Korea ($37{\circ}$.00'N to $37{\circ}$30'N and $129{\circ}$40'E to $130{\circ}$30'E) are preliminarily processed using the developed system and reproduced in the raster image format as well as three dimensionally visualized form.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.7
• /
• pp.219-227
• /
• 2019

In this paper, we proactively looked at the structure and characteristics of each instrument in order to compare and analyze the sound colors of the western violin, chinese erhu and korean haegeum, which are representative bow string instruments. Also, many performers have simply been unable to fully explain how the violin is rich in pitch and the haegeum has a unique tone. Also, many performers thinks that violin sounds rich just because it has many overtones and have been unable to fully explain how haegeum makes unique tone. While previous research data show that most instruments are studied and published by analyzing their own frequencies or related cases of acoustic studies, this study provides a visual look how the harmonics composition, which determines musical instruments' timbres, consists of and suggests data specifically by analyzing each sound pressure of integer multiple overtones so that the structure of instruments' unique timbre can be understood. Based on this, we hope that it will be of considerable help to the development of virtual musical instruments of korean traditional instruments, which are relatively small compared to western virtual instruments, by reproducing instrument sounds through the synthesizers in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.131-137
• /
• 2024

Aerodynamic noise generated by the surrounding flow of a train traveling at high speed affects both outdoor and indoor noise. This study's goal is to develop a test method to measure and quantitatively evaluate aerodynamic noise through pressure perturbation data on the train surface. To accurately evaluate aerodynamic noise, it is important to separate and evaluate the compressive and incompressible pressure fluctuations mixed in the acquired surface pressure fluctuation data. This is because the noise transmission characteristics of the two pressure fluctuations are different. First, the installation length and interval of the microphone were determined to acquire surface pressure fluctuation data, and wavenumber-frequency analysis was performed to separate incompressible pressure fluctuation and compressible pressure fluctuation to obtain a sound pressure level spectrum. Finally, as a result of comparing the test results measured in the train head and trail, It was confirmed that the pressure fluctuation on the train head surface was greater than that on the tail.

• Journal of Korean Society for Quality Management
• /
• v.51 no.4
• /
• pp.715-734
• /
• 2023

Purpose: Authors suggest a new alternative of preparedness capabilities for health care institutes to react to the new types of communicable diseases and the pandemic situations through the quality improvement and advancement of Negative Pressure Isolation Stretcher (NPIS). Methods: We employed FOCUS-PDCA, a representative quality improvement model. First, we identified and materialized necessary components of existing NPIS to be improved. Second, we fabricated an advanced NPIS prototype. Third, we carried out a performance test by the accreditation institute and an empirical evaluation at the communicable diseases trauma center, to locate the improvement pain points of the prototype. Finally, we draw a conclusion on quality improvement points to be considered during the production stage. Results: The suggested, NPIS outperforms the existing one in terms of communicable disease controls, patient treatments and the safety during the patient transfer, and the ease of use. Additionally, the suggested NPIS turns out to be a proper alternative to satisfy the requirements of long range transfer of patients with communicable disease. Conclusion: Authors developed a quality improved, NPIS prototype. There are several points that still remain to be improved. Additionally, we expect that the concurrent use of the suggested NPIS with the existing one will fortify the preparedness capabilities on reacting to the communicable diseases.