• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.661-669
• /
• 2022

The need for miniaturization, high efficiency, and green energy resources as an energy storage device through the development of various electronic device has emerged. Accordingly, nanomaterials with excellent electrochemical properties, such as graphene and graphene hybrids, are attracting attention as promising materials. In particular, in the electric vehicle industry, cost reduction of secondary batteries is a key factor that can determine the spread of related industries, and it is most important to analyze R&D trends for battery material technology and respond to future technological development directions. Therefore, in this study, we tried to suggest a direction for R&D activities in the future by analyzing patent trends for graphene anode material technology for secondary batteries and deriving implications. As a result, in the case of anode material technology, the proportion of foreigners in the US and European patent markets was higher than in the Korean and Japanese patent markets, which means that the US and European marketability is high. In addition, Japanese applicants are filing high-level applications not only in the Japanese patent market but also in other countries suggests that Japan is leading the technology in this field. Lastly, the proportion of research institutes in the patent market of Korea and the US remains high compared to that of Japan and Europe, indicating that the commercialization of technology is still slow in those countries. Therefore research institutes and companies in Korea will have to establish their own strategies for developing and securing materials using the results of patent trends in major countries and major companies analyzed in this study.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.672-678
• /
• 2019

The electrochemical properties of pitch-coated natural graphite(NG) were investigated as an anode for lithium-ion batteries. The anode materials were prepared by heat-treatment of mixture of NG and petroleum pitch at $1000^{\circ}C$. The pitches with various softening points were used as carbon precursor. The physical properties of anode materials were analyzed by TGA, SEM, PSA and BET. As the softening point increased, the thickness of the coating layer increased and the specific surface area decreased. The electrochemical performances were investigated by initial charge/discharge efficiency, cycle stability, cyclic voltammetry, rate performance and electrochemical impedance spectroscopy. The carbon-coated NG using pitch with softening points of $250^{\circ}C$ showed an initial discharge capacity of 361 mAh/g and a coulombic efficiency of 92.6%. Also, the rate performance(5 C/0.2 C) was 1.6 times higher than that of NG, and it had a capacity retention (90%) after 50 cycles at 0.5 C.

• Electrical & Electronic Materials
• /
• v.35 no.3
• /
• pp.15-21
• /
• 2022

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.59-66
• /
• 2022

Lithium-ion batteries have greatly expanded along with the mobile phone market, and as the electric vehicle business is activated in earnest, they will attract many people's attention even afterwards. Until now, many people have attracted attention to the recovery of valuable metals inside lithium-ion batteries, but graphite, which is mainly used as an anode material, is also worth recycling. Therefore, in order to recover graphite with high purity and valuable metals, graphite that can be used as an anode material of a secondary battery may be generated again through a regeneration process of purifying and separating graphite from a waste lithium-ion battery and recovering electrical characteristics of graphite. This paper describes the process of converting waste graphite into regenerated graphite and the environmental and economic effects of regenerated graphite.

• Applied Chemistry for Engineering
• /
• v.35 no.2
• /
• pp.140-147
• /
• 2024

In order to increase the utilization of biomass, an electrochemical performance was considered after manufacturing a carbon anode material (SV-C) for a Setaria viridis-based lithium ion secondary battery through a heat treatment process. When the heat treatment temperature of the Setaria viridis is as low as 750 ℃, the capacitance (1003.3 mAh/g, at 0.1 C) is high due to the negative (-) charge of oxygen present on the surface attracting lithium, along with the low crystallinity and high specific surface area (126 m²/g), but the capacity retention rate is believed to be as low as 61.0% (at 500 cycles and 1 C). In addition, it was confirmed that when the heat treatment temperature increased to 1150 ℃, the carbon layer was condensed to be excellent in arrangement, and the structural defects were reduced, resulting in a significant reduction in the specific surface area (32 m²/g) of the pores. Furthermore, when the surface defects of the anode material are reduced and the crystallinity is increased, the capacity retention rate is as high as 89.7% (at 500 cycles and 1 C), but the degree of defects is small, the active point is reduced, and the specific capacity is considered to be very low at 471.7 mAh/g. In the scope of this study, it was found that in the case of the Setaria viridis-based carbon anode material manufactured according to the heat treatment temperature, the surface oxygen content and crystallinity have higher reliability on the electrochemical properties of the anode material than the specific surface area.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.207-212
• /
• 1996

실증규모의 수지충전식 전기투석 재생조를 사용하여 농축음극액내 바나듐의 전기화학적 환원 방법에 의한 재생거동을 조사하였다. 전기투석 분리재생 종료후 남아있는 개미산용액을 전해액으로 사용한 농축음극액내 전기투석된 철 및 코발트는 음극액의 pH를 약 4.3내외로 조절하면 전해환원에 의해 전착.제거된다. 또한 농축음극액내 바나듐은 +2가로 전해환원 되어 착화물을 이루고 있는 Vanadous picolinate 형태로 존재하기 때문에 음극액은 농축된 LOMI 제염제로 재생된다. 이 전해환원에 의한 농축음극액의 재생방법은 제염폐액의 전기투석 분리재생 후 피콜리네이트 착화제만을 재사용하는 기존의 재생개념보다 더욱 효과적으로 제염폐액을 재생시켜 재활용할 순 있는 방사성폐기물의 감용효율이 큰 향상된 제염폐액 재생공정이다.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.3
• /
• pp.154-159
• /
• 2012

Structural volume change occurring on the Si-based anode battery materials during alloying/dealloying with lithium is noticed to be a major drawback responsible for a limited cycle life. Silicon monoxide has been reported to show relatively improved cycling performance compared to Si-containing materials for rechargeable lithium batteries, due to the structural buffering role of in-situ formed $Li_2O$ and lithium silicate during the reaction of silicon monoxide and lithium. Here we report improved cycling ability of interfacially stabilized Si-$SiO_2$-graphite composite anode using silane-based electrolyte additive for rechargeable lithium batteries, which includes low cost silicon dioxide for structural stabilization and graphite for enhanced conductivity.

• NICE (News & Information for Chemical Engineers)
• /
• v.36 no.3
• /
• pp.312-316
• /
• 2018

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.137-137
• /
• 2018

이 연구에서는 리튬이온전지용 음극 활물질의 리튬이온 저장 용량을 최적화시키기 위한 새로운 방법이 제안되었다. 그 방법은 솔루션 플라즈마 프로세스를 사용하여 원자 단위의 리튬을 탄소 기반 물질의 내부에 도핑 시키고, 열처리를 통해 그 내부를 재설계하는 것이다. 리튬이온전지용 음극 활물질로 리튬금속 자체를 사용하려는 시도는 있었으나, 이는 충전 및 방전 사이클이 반복됨에 따라 리튬이 수지상으로 석출되어 내부를 단락시키거나, 리튬금속 자체의 폭발성에 의한 취급상의 제약이 있었다. 한편, 원자 단위로 탄소 내부에 도핑 된 리튬은 열처리 과정 동안 탄소 내부에서 확산함으로써 더 많은 리튬이 저장될 수 있는 공간을 만들었고, 사이클이 반복됨에 따라 서서히 충전 및 방전 반응에 참여함으로써 전지의 성능을 개선시켰다. 리튬이 도핑 된 탄소의 전기화학적 테스트 결과를 Fig. 1에 나타내었다. 실험 결과에서 보여진 초기 고용량 및 장기 사이클 특성은 탄소 내부에 도핑 된 리튬이 전지 성능의 향상에 중요한 역할을 한다는 것을 시사한다. 또한, 사이클이 반복됨에 따라 점차 증가하는 용량은 첫 사이클에서 형성된 solid electrolyte interphase의 비가역 용량을 보상할 수 있을 것으로 생각된다. 이상의 결과를 통해, 탄소 내부에 원자단위의 리튬을 도핑시키는 새로운 접근은 리튬이온전지의 성능 개선을 위한 효과적인 방법이 될 수 있을 것으로 보이며, 향후 리튬 이외의 다른 원소들, 즉 소듐과 같은 물질에 대하여 도핑을 시도한다면 새로운 분야에서 이와 같은 접근법이 유용하게 적용될 수 있을 것으로 사료된다.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.243-252
• /
• 2021

With increasingly strict requirements for advanced energy storage devices in electric vehicles (EVs) and stationary energy storage systems (EES), the development of lithium-ion batteries (LIBs) with high power density and safety has become an urgent task. Because the performance of LIBs is determined primarily by the physicochemical characteristics of its electrode material, TiO₂, owing to its excellent stability, high safety levels, and environmentally friendly properties, has received significant attention as an alternative material for the replacement of commercial carbon-based anode materials. In particular, self-organized TiO₂ micro and nanostructures prepared by anodization have been intensively investigated as promising anode materials. In this review, the mechanism for the formation of anodic TiO₂ nanotubes and microcones and the parameters that influence their morphology are described. Furthermore, recent developments in anodic TiO₂-based composites as anode electrodes for LIBs to overcome the limitations of low conductivity and specific capacity are summarized.