• Journal of the Korean Geotechnical Society
• /
• v.25 no.9
• /
• pp.19-27
• /
• 2009

In order to investigate anti-freeze process of precast concrete L-type retaining walls in cold regions, test walls were installed in the campus of Kitami Institute of Technology (KIT, Hokkaido, Japan). The wall consists of following three sections, i) back filled with frost susceptible clay soil, ii) using thermal insulation material, and back filled with frost susceptible soil, iii) back filled with frost-unsusceptible soil. The freezing front distribution and ground temperature within the backfill were observed and deflections of the walls were measured over three freeze-thaw seasons. Some understanding of the mechanisms of the build-up of frost heave pressure was gained, and the effectiveness of replacement method was observed. A simulation was performed to predict the shape of the freezing front in the backfill behind L-type walls with various cross sections. These findings were employed to propose a method for determining the appropriate zone to be replaced with frost unsusceptible backfill material in cold regions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1716-1720
• /
• 2006

침투는 지반이 충적토로 구성되어 있는 제방의 파괴를 야기하는 중요한 원인이다. 침투 해석 수치모형은 제방 침투와 관련된 문제 해석과 방지기법 설계에 있어 매우 유용한 방법이나, 각각의 수치모형은 적용상 한계와 문제점을 내포하고 있다. 실제 지하수 흐름은 간극률, 입자형상 및 크기, 포화도 등과 같은 토질특성, 내부침식과 같은 역학적 특성, 점성과 동결융해 같은 열역학적 특성, 그리고 화학적 특성 등 다양한 인자의 영향을 받는다. 이러한 물리적 인자 이외에도 침투 수치해석은 외력조건, 격자 크기(element size), 그리고 시간 간격(time step interval) 등 입력조건에 영향을 받기 때문에 이들 설정에 대한 검토를 시행하여야 한다. 본 연구에서는 침투 수치모형의 적절한 입력조건 범위를 검토하였으며, 격자크기는 계산시간과 해석결과 등 수치모의의 효율성을 고려하였을 때 홍수위 혹은 제방고의 1/10이하로 결정하면 타당할 것으로 판단된다. 그리고 침투수치모형의 시간 간격은 외력조건을 고려하여 1시간 이내로 설정하는 것이 바람직할 것으로 판단된다. 본 연구결과는 침투해석 수치모의의 유의사항을 검토하여 해석결과에 대한 불확실성과 위험요소를 제거하는데 도움이 될 것으로 판단된다.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.12
• /
• pp.33-43
• /
• 2016

In order to analyze ground relaxation and cavity formation mechanism due to deteriorated sewer pipe, field test was carried out and a numerical assessments were compared with the field test results. An artificial underground cavity was intended using the ice block overlaying the buried pipe and confirmed that the cavity and relaxation of the surrounding ground were gradually formed as the ice block starts to melt down. Such mechanism was highly suspected to be involved with soil particle interlocking as a soil compaction was a typical process for the buried pipes. In exploring such mechanism numerically, commercially available DEM (Discrete Element Method) code PFC2D was used and the interlocking induced cavern behaviors were successfully simulated and compared with field test results by utilizing the clump logic imbedded in PFC code.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.4
• /
• pp.315-322
• /
• 2009

This paper presents a novel numerical method based on the extended moving least squares finite difference method(MLS FDM) for solving 1-D Stefan problem. The MLS FDM is employed for easy numerical modelling of the moving boundary and Taylor polynomial is extended using wedge function for accurate capturing of interfacial singularity. Difference equations for the governing equations are constructed by implicit method which makes the numerical method stable. Numerical experiments prove that the extended MLS FDM show high accuracy and efficiency in solving semi-infinite melting, cylindrical solidification problems with moving interfacial boundary.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.3
• /
• pp.27-35
• /
• 2012

In this paper, the frost heaving and thawing characteristics of flexible pavement structure were evaluated in the large scale freezer which have a specification of temperature range $-20^{\circ}C{\sim}10^{\circ}C$ and $3.2m(L){\times}3.2m(B){\times}2.4m(H)$ in size. The insulated steel box with the size of $0.9m(L){\times}0.9m(B){\times}0.9m(H)$ was used to simulate actual pavement road structure. The variation of temperature, frost heave amount and frost heave pressure were measured through the instrument of TDS-602 data logger. LFWD (light falling weight deflectometer) was used to determine the change of deflection due to the frost heaving and thawing. Furthermore, the influence of aggregate layer to the freezing of the subgrade soil was studied to verify the function and effectiveness of the anti-freezing layer.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.1
• /
• pp.28-33
• /
• 2017

SiC fiber can be used up to $1800^{\circ}C$ in both inert and air atmosphere without any problems such as melting and oxidation. SiC fibers can be applied to dust filtering processes as a bag filter at a high temperature above $700^{\circ}C$, which is far beyond the temperature range of currently available industrial bag filter. However the studies for the degradation of SiC fibers were still lacked in the harsh environment of steel industries and thermoelectric power plants. In this study, SiC fibers were reacted with steel dust and thermal power plant dust at a high temperature of $500^{\circ}C$ or higher, and the degraded shape of the fiber surface was observed by SEM. Also the degree of oxygen diffusion on the surface and inside of SiC fiber was analyzed by EDS.

• Elastomers and Composites
• /
• v.45 no.1
• /
• pp.32-39
• /
• 2010

The mechanical properties of PTFE 100%, PTFT 90% + carbon black 10%, PTFE 85% + glass fiber 15%, PTFE 80% + glass fiber 15% + molybdenum disulfide ($MoS_2$) 5%, PTFE 75% + glass fiber 25%, and PTFE 75% + carbon black 18% + graphite 7% composites were investigated in this study. The differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to examine the heat of fusion(${\Delta}H_f$) and thermal stability of the composites. Also, the wear surface and wear volume of PTFE lip seal were examined using the durability test. Wear surface was observed using scanning electron microscope (SEM). It was found that the hardness, wear resistance and durability were enhanced by adding glass fiber and molybdenum disulfide into pure PTFE, but tensile strength and elongation were decreased. According to the experimental results, the composite (PTFE + 15% glass fiber + 5% molybdenum disulfide) showed the best properties for applying to oil-seal among six types of PTFE composites.

• Cross-Cultural Studies
• /
• v.49
• /
• pp.33-58
• /
• 2017

As a living space, house constitutes a good part of inhabitants' life, making the rhythm of life. This rhythm tends to be reflected into the house, establishing a sort of intercommunications between the house and its inhabitants. Becoming a living element, the house can endow the writer with literary resources. It is interrelated with its inhabitants. Thus, Duras' work preserves many invisible and fusional traces of links between her characters and the house. With her writing, the house displays important traces of life, with which a body of meaning is to be formed. It implies habits, imprints, links, and so on. Here, its projection into the imaginary also takes place for our writer. With this perspective in view, Duras is supposed to objectify her characters as physical and imaginary bodies. This introduces the passage from the real to the imaginary and vice versa. Unknown stories hidden behind the living places can come to manifest themselves through her writing.

• Korean Journal of Materials Research
• /
• v.4 no.5
• /
• pp.600-607
• /
• 1994

Optimum exper~mental conditions were established for the growth of heteroepitaxial GaAs layers on InP using liquid phase epitaxy (LPE) technique. Results showed that the optimum growth temperature was $720^{\circ}C$ at a cooling rate of $0.5^{\circ}C$/min. Surface morphology of the grown layers significantly improved by addition of about 0.005wt% Se to the Ga growth melt, which effectively suppressed melt-back of InP substrates into the melt during the initial stage of growth. It was observed that the quality of GaAs layers also improved substantially when the substrates patterned with grating structure were used, as determined by the (400) double crystal X-ray diffraction. The transmission electron microscopy observation indicated t.hat the misfit dislocations interact with each other at the grating region, resulting in a lower dislocation density in the upper GaAs layer.