• Journal of Advanced Navigation Technology
• /
• v.13 no.6
• /
• pp.916-925
• /
• 2009

4S (Ship to Ship, Ship to Shore) communication is the key to strategic development of e-navigation, a core element of IT vessel convergence. 4S communication is intended to integrate and standardize various communication infrastructures on land and communication equipment complying with communication equipment equipped in ships. This paper aims to apply the Korean technology IEEE 802.16e adopted as an international standard, to replace and compensate for existing vessel communication media such as low speed HF/MF/VHF to the ocean environment. To this end, various experimental conditions between the coast station where a relay station was installed and related equipment equipped on a ship are set. Communication signals were monitored and the RSSI and CINR were measured. Based on experimental analysis and results, various challenges and solutions which may occur in ocean environment were sought, and communication availability was analyzed through transmission data throughput, at the maximum effective distance range of the signal. It was proven that high speed multimedia data could be exchanged for up to 20 km even among 80km kph ships moving around near the sea, ensuring that this technology could be applied to the ocean environment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.78-90
• /
• 2021

In order to construct a precision geoid, it has been diversified into land, sea, aviation, and satellite gravity measurement methods, and measurement technology has developed, making it possible to secure high-resolution, high-precision gravity data. The construction of precision geoids can be fast and conveniently decided through GNSS surveys without separate leveling, and since 2014, the National Geographic Information Institute has been developing a hybrid geoid model to improve the accuracy of height surveying based on GNSS. In this study, the results of the GNSS height measurement were compared and analyzed choosing existing public reference points to verify the GNSS height measurement of public surveys. Experiments are conducted with GNSS height measurements and analyzed precision for public reference points on coastal, border, and mountainous terrain presented as low-precision areas or expected-to-be low-precision in research reports. To verify the GNSS height measurement, the GNSS ellipsoid height of the surrounding integrated datum to be used as a base point for the GNSS height measurement at the public datum. Based on the checked integrated datum, the GNSS ellipsoid of the public datum was calculated, and the elevation was calculated using the KNGeoid18 model and compared with the results of the direct level measurement elevation. The analysis showed that the results of GNSS height measurement at public reference points in the coastal, border, and mountainous areas were satisfied with the accuracy of public level measurement in grades 3 and 4. Through this study, GNSS level measurement can be used more efficiently than existing direct level measurements depending on the height accuracy required by users, and KNGeoids 18 can also be used in various fields such as autonomous vehicles and unmanned aerial vehicles.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.530-538
• /
• 2011

In this paper, the feasibility of LEO(low earth orbit) satellite-based automatic identification system (SAT-AIS) for the coastal area of the South Korea is evaluated in the context of ship AIS transmission detection probability. We evaluate and compare AIS signal detection probability of ORBCOMM satellites and LEO-one satellites considering link budget, SOTDMA protocol and satellite's swath width. The simulation determines the total number of vessels served by those satellites according to satellite's swath width and thus, By simulation results, the ORBCOMM SAT-AIS system outperforms LEO-one SAT-AIS system. The suggested ORBCOMM based SAT-AIS system can be a solution to resolve the existing limited transmission distance problem of the conventional ship-to-shore AIS system.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.117-126
• /
• 2009

Korea Highway Corporation has played a role of the construction and operation of the highway for the past for 40 years. The private sector since the 90s has made highway construction and operation. Central government and local governments were paid at subsidy in least operating income to 1.5896 trillion won for private operators from 2001 to 2008. Thus, Korea Highway Corporation will have important implications for understanding the cost structure. Korea Highway Corporation, a general analysis of the input element is used efficiently. And the operation of labor and capital estimated highly of the substitution elasticities. Korea Highway Corporation are judged to need financial separation of a strategic outsourcing(business) enabled and the construction(maintenance and management) and business institutions. In addition, currently running at highway the operation of institutions combined to configure a new institution, if that institution invigorate the hi-pass, more of the country's highway believe to be increase operational efficiency.

• Journal of Intelligence and Information Systems
• /
• v.26 no.4
• /
• pp.87-109
• /
• 2020

Currently, thanks to the major stride made in developing wired and wireless communication technology, a variety of IT services are available on land. This trend is leading to an increasing demand for IT services to vessels on the water as well. And it is expected that the request for various IT services such as two-way digital data transmission, Web, APP, etc. is on the rise to the extent that they are available on land. However, while a high-speed information communication network is easily accessible on land because it is based upon a fixed infrastructure like an AP and a base station, it is not the case on the water. As a result, a radio communication network-based voice communication service is usually used at sea. To solve this problem, an additional frequency for digital data exchange was allocated, and a ship ad-hoc network (SANET) was proposed that can be utilized by using this frequency. Instead of satellite communication that costs a lot in installation and usage, SANET was developed to provide various IT services to ships based on IP in the sea. Connectivity between land base stations and ships is important in the SANET. To have this connection, a ship must be a member of the network with its IP address assigned. This paper proposes a SANET-CC protocol that allows ships to be assigned their own IP address. SANET-CC propagates several non-overlapping IP addresses through the entire network from land base stations to ships in the form of the tree. Ships allocate their own IP addresses through the exchange of simple requests and response messages with land base stations or M-ships that can allocate IP addresses. Therefore, SANET-CC can eliminate the IP collision prevention (Duplicate Address Detection) process and the process of network separation or integration caused by the movement of the ship. Various simulations were performed to verify the applicability of this protocol to SANET. The outcome of such simulations shows us the following. First, using SANET-CC, about 91% of the ships in the network were able to receive IP addresses under any circumstances. It is 6% higher than the existing studies. And it suggests that if variables are adjusted to each port's environment, it may show further improved results. Second, this work shows us that it takes all vessels an average of 10 seconds to receive IP addresses regardless of conditions. It represents a 50% decrease in time compared to the average of 20 seconds in the previous study. Also Besides, taking it into account that when existing studies were on 50 to 200 vessels, this study on 100 to 400 vessels, the efficiency can be much higher. Third, existing studies have not been able to derive optimal values according to variables. This is because it does not have a consistent pattern depending on the variable. This means that optimal variables values cannot be set for each port under diverse environments. This paper, however, shows us that the result values from the variables exhibit a consistent pattern. This is significant in that it can be applied to each port by adjusting the variable values. It was also confirmed that regardless of the number of ships, the IP allocation ratio was the most efficient at about 96 percent if the waiting time after the IP request was 75ms, and that the tree structure could maintain a stable network configuration when the number of IPs was over 30000. Fourth, this study can be used to design a network for supporting intelligent maritime control systems and services offshore, instead of satellite communication. And if LTE-M is set up, it is possible to use it for various intelligent services.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.570-575
• /
• 2022

The MX-S2X, utilizing high-frequency broadband communication technology, provides a reliable connection between land, ship, and facilities. This technology is expected to be effectively utilized as a future maritime communication infrastructure in the upcoming mixed navigational situation among autonomous and manned and/or unmanned ships. Following the physical layer design and M&S-based performance analysis of the MX-S2X system to overcome maritime multipath fading, this paper confirms the optimized and detailed design of physical layer hardware and implemented it to verify the performance. The PER(Packet Error Rate) performance was then measured by configuring a test environment to verify the implemented hardware. The results showed that the performance degradation was 0.2 dB in the AWGN environment and 1.2 dB in the Multi-path Fading on Sea Environment, thus confirming the successful implementation of the physical layer.

• Journal of Korea Water Resources Association
• /
• v.56 no.spc1
• /
• pp.1027-1036
• /
• 2023

Coastal topographic information is crucial in coastal management, but point measurment based approeaches, which are labor intensive, are generally applied to land and underwater, separately. This study introduces an efficient method enabling land and undetwater surveys using an unmanned aerial vehicle (UAV). This method involves applying two different algorithms to measure the topography on land and water depth, respectively, using UAV imagery and merge them to reconstruct whole coastal digital elevation model. Acquisition of the landside terrain is achieved using the Structure-from-Motion Multi-View Stereo technique with spatial scan imagery. Independently, underwater bathymetry is retrieved by employing a depth inversion technique with a drone-acquired wave field video. After merging the two digital elevation models into a local coordinate, interpolation is performed for areas where terrain measurement is not feasible, ultimately obtaining a continuous nearshore terrain. We applied the proposed survey technique to Jangsa Beach, South Korea, and verified that detailed terrain characteristics, such as berm, can be measured. The proposed UAV-based survey method has significant efficiency in terms of time, cost, and safety compared to existing methods.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.510-516
• /
• 2003

연안관리 정책을 결정하기 위해서는 다양한 정보의 수집과 이를 체계적으로 관리하고 분석할 수 있는 기법이 필요하다. 특히, 다양한 이해집단과 목적들이 상충하는 지역의 특성을 파악하기 위해서는 환경, 사회, 경제적인 기준 및 의사결정자의 가치체계가 반영될 수 있어야 하며, 선호도가 반영된 요소를 효율적으로 분석할 수 있어야 한다. 이에, 본 연구에서는 공간자료의 처리 및 분석이 용이한 GIS 환경에 다기준 분석법, 그 중에서도 AHP 모형을 결합하는 방법을 다루어 보았다. 분석과정을 살펴보면, 본 연구에서는 지역에 영향을 미치는 사회ㆍ경제적인 지표, 환경 지표를 정하였고, 이런 지표들의 데이터를 GIS라는 도구를 통하여 분석이 용이하도록 변환시켰다. 한편, 이 지역에 영향을 미치는 각 기준들의 중요성을 파악하여 의사결정자의 의견을 반영할 수 있도록 다기준 분석법의 하나인 AHP를 이용하여 가중치를 산정하였다. 다음으로, 다양한 출처의 자료를 표준화하여 GIS의 래스터 자료로 구축한 후, 가중치를 적용한 개별 레이어를 지도대수와 중첩분석을 이용하여 최종 결과 레이어를 생성하였다. 생성된 최종 결과 레이어 상의 공간의 대안인 각 셀 값을 비교ㆍ분석하였다. 이로 인한 결과는 연안의 유한한 자원과 공간의 다양한 이용상태를 관리하기 위한 해안과 육상의 정보를 제공할 수 있다. GIS와 다기준 분석을 통합함으로써 다양한 출처의 공간정보를 분석하고 연안의 현 상태를 밝힐 수 있다. 또한, 이것은 분석 결과가 단순하고 명확하게 설명되어 정책 결정자에게 유용한 정보를 제공할 뿐만 아니라, 이 정보를 이용하여 실질적인 연안관리계획을 수립하는데 도움이 된다.가능성 0.5이상의 면적은 59%를 차지하였다.퇴적이 우세한 것으로 관측되었다.보체계의 구축사업의 시각이 행정정보화, 생활정보화, 산업정보화 등 다양한 분야와 결합하여 보다 큰 시너지 효과와 사용자 중심의 서비스 개선을 창출할 수 있는 기반을 제공할 것을 기대해 본다.. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.eveloped. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be sim

• Journal of Navigation and Port Research
• /
• v.31 no.8
• /
• pp.645-652
• /
• 2007

As a method to improve the present operational and safe function in navigation this paper developed an efficient and economical integrated system of ship's information. This system is, systematically and comprehensively, to monitor, save, analyse, and display information on navigation and environment around own ship in real time by connecting one user to another through an on-board LAN or data communication via satellite so that many users on board can obtain simultaneously and easily the information in real time not only in the wheelhouse and engine room but also in many robins and ship's offices. And it consists of four(5) components; data distribution program, database of navigational and engine-related information, multi-functional monitoring program, ship management program and other application program.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.1
• /
• pp.81-94
• /
• 1995

By intergrating technologies for protable computers, radio communications, and computer networking, the Land Mobile Computer Network(LMCN) is supposed to overcome the time and space limitation of present computer communication network. However, because the MHs(mobile hosts) do move any time, the network connectivity is often changed causing temporarily duplicated lost, or out-of-sequenced message delivery as well as frequent communications for maintainning the network connectivity. Previous works solved the problems through message flooding, used also in multicasting, resulting in high communication cost(i.e., number of communication messages). In this paper, new protocols for efficient mobility management and multicasting are proposed. The protocols define location update, handover, and multicasting procedure of a MH over a hierarchical LMCN architecture. The protocol specification is presented, and it is shown that the communication cost of the new protocols is superior to the existing ones in terms of the communication cost.