• Spatial Information Research
• /
• v.20 no.3
• /
• pp.1-14
• /
• 2012

This paper has investigated the unreasonable pricing system for container cargo with special reference to inland transport since it is determined by administrative boundary without considering travelling distance. This research is primarily intended to improve the current pricing system by introducing a pricing support system about the container cargo in the country which applies GIS service area analysis to transportation data. Price simulation maps were generated to find out reasonable pricing strategy. Pricing alternative integrating travelling distance into administrative zoning brings about more desirable results than individual driving cost alone. The research can contribute to more reasonable pricing for the fuel consumption expense and serve as useful instruments for planning pricing system for container cargo. It is anticipated that this research output could be used as a valuable reference to increase the scientific and objective pricing for container cargo by overcoming serious constraints suffered from the past non-GIS-based approach.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.1
• /
• pp.3-36
• /
• 2016

Recently, the Supreme Court of Korea delivered a milestone judgment about air related multimodal transport. At there, the mattered cargo, some expensive jewellery, was transported from Qingdao, China to downtown office of consignee at Seoul via Incheon airport in Korea. As an air waybill was issued in this case, there was an air transport agreement between consignor and air courier operator. After arriving at Incheon airport, the shipment was transport by land arranged by the air courier operator, who was a defendant in this case. Upon arriving at the final destination, it was found that the jewellery was lost partly and based on circumstantial evidence, the damage presumed to be occurred during the land transport. As a subrogee, the insurance company who paid for consignee filed an action against the air courier operator for damage compensation. Defendant contended that Montreal convention should be applicable in this case mainly for limited liability. The lower court of this case confirmed that applying the limited liability clause under Montreal Convention is improper under the reason that the damage in this case was or presumed to be occurred during surface transport. It was focused on the Montreal Convention article 18 which says that the period of the carriage by air does not extend to any carriage by land, by sea or by inland waterway performed outside an airport. However, the Supreme Court overturned the lower court's decision. The delivered opinion is that the terms of condition on the air waybill including limited liability clause should be prevailed in this case. It seems that the final judgment was considered the fact that the only contract made in this case was about air transport. This article is for analysis the above decisions from the perspective that it is distinguishable between a pure multimodal transport and an expanded air transport. The main idea of this article is that under the expanded air transport, any carriage by land, sea or inland waterway only for the performance of a contract for carriage by air, for the purpose of loading, delivery or transhipment is still within the scop of air transport.

• Journal of Korea Port Economic Association
• /
• v.28 no.4
• /
• pp.59-77
• /
• 2012

Inland transportation system has been improving inefficiencies and structural problems due to excess of supply. Therefore, inland transportation market needs to reform its regional logistics structure in order to increase its competitiveness. To improve the solution, the research studied efficiencies and productivity of inland transportation systems in regions. In order to obtain specific facts, each cities' five years of (2005-2009) balanced panel data on inland transportation system has been studied. According to CCR and BCC analysis, Ul-San has been evaluated as the most efficient DMU during 2005-2008. In addition, in 2009, Seoul was the most efficient DMU. Also, according to Window analysis, Gwan-Ju and Gwangwon-do scored 0.062. Therefore, they were estimated as stable DMUs. According to Malmquist productivity analysis, average productivity indexes of four terms of Chungcheongnam-do and Chungcheongbuk-do haves been increased to 6.6% and 7.3%. I hope this study contributes to the improvement of regional inland transportation system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.4
• /
• pp.42-50
• /
• 2001

In this paper, the reduction of CO₂ gas emission and exhaust gas emission by using the shift of coastal transport from land transport for import-export container cargo was proposed. At first, the domestic CO₂ gas emission, exhaust gas emission and the transportation of import-export container cargo are investigated. And also, we investigated the reduction of CO₂ gas emission and exhaust gas emission by the shift of coastal transport from land transport for the transportation of import-export container cargo between Kyongin area and Pusan Port. Finally, the change of NOx gas emission due to the change of the share of coastal transportation and using the 320TEU container ship are investigated. The research results show that the shift of coastal transport from land transport was effective to reduce the CO₂ gas emission and exhaust gas emission.

• Plant Journal
• /
• v.13 no.3
• /
• pp.30-35
• /
• 2017

Module can be categorized as PAS(Pre-Assembled Steel structure), PAR(Pre-Assembled pipe Rack), PAU(Pre-Assembled Unit), VAU(Vendor Assembled Unit) and VPU(Vendor Package Unit). At the stage of design and fabrication of module, the condition of land and ocean transportation is considered and these conditions are reflected on the module division design. The control of the module's center of gravity is important to transport and install modules safely and the steel structure should have the strength enough to resist the sea acceleration force during the ocean transportation. The transportation condition and the installation method influence the size and weight of module. The size and weight of module are considered for the design of module division.

• Journal of Information Technology Application
• /
• v.3 no.2
• /
• pp.67-82
• /
• 2001

The ILOF project addresses the needs of logistics industrial organizations to reduce information processing time, improve added and residual value of information and reduce processing and transportation costs. It deals with the information supply chain information systems shared by vertical partner as important entity, whose performance and optimization very significantly affects the efficiency and performance of logistics industries. This paper deals with logistics information exchange systems based on supply chain management, focusing on sharing database and processes between partners such as shipper, logistics broker, transportation company, shipping company etc., for smoothing the information flow, enhancing consumer service and reducing communication fee and labour costs. The significance of contribution of this research is the provision of a model for logistics information exchange including entity relationship diagram, data flow diagram and functions which is able to facilitate the formulation of a customer driven supply chain information network, there by enhancing the competitive edge of companies in logistics industries on local and global basis.

• 복합운송
• /
• s.129
• /
• pp.10-11
• /
• 2000

• Journal of Korean Society of Transportation
• /
• v.30 no.3
• /
• pp.17-30
• /
• 2012

This study analyzes the basic characteristics needed for motivating modal shift from truck to rail. The object of the study is to consider the resistance factor for container transported inland and the object point is the transfer node where modal shift occurs. The main contents of the study are as follows. First, the study looks at what shippers, engaged in inland transport of container, think of current transfer node environment. From this, the study analyzes what resistance factors are attributable to the lack of motivation in modal shift from truck to rail. Second, the study estimates mode choice models in which the resistance factors at transfer node are applied. Also by using this, the study draws out elasticities, and analyzes characteristics of resistantance factors in modal shift. Third, as its result, the study suggests methods to promote modal-shifting container transport from truck to rail.

• The Magazine of the IEIE
• /
• v.39 no.5
• /
• pp.47-52
• /
• 2012

• Proceedings of the Korea Database Society Conference
• /
• 1999.06a
• /
• pp.335-345
• /
• 1999

오늘날 날로 증가하는 물류비는 개별 기업은 물론 국가 전체의 수출 경쟁력을 약화시키는 주요 원인으로 지적되고 있다. 그러나 그동안 우리나라에서는 물류비 절감을 위한 종합적이고 체계적인 대책이 이루어지지 못하였다. 특히 본 논문의 연구대상인 육상물류의 경우 그 비중이 전체 화물 운송의 60% 이상을 차지함에도 불구하고 심각한 교통체증 및 물류기반 시설의 미비, 효율적인 정보시스템의 미비 등으로 인하여 물류비가 계속 증가하는 양상을 보여 왔다. 따라서 본 논문에서는 우리나라 육상물류시스템이 안고 있는 문제점의 해결을 위한 방안들 중의 하나로 정보기술의 활용에 관한 내용을 다루고 있다. 즉 영세한 기업들도 누구나 손쉽게 이용할 수 있도록 인터넷을 이용한 육상물류중개시스템의 개발에 관한 내용을 소개하고 있다. 육상물류중개시스템은 복합화물주선업체인 (주) 대형물류와 함께 개발한 시스템으로 인터넷을 통하여 화주의 화물 운송의뢰를 접수받아 이를 여러 운송업체에게 제공해주는 역할을 수행하게 된다. 특히 육상물류중개시스템은 화물의 운송과 관련하여 발생하는 다양한 정보들을 데이터베이스에 저장하여 두었다가 세관을 비롯한 터미날에 대한 각종 신고업무에 이용할 수 있으며, 이밖에도 교통정보 및 화물 위치정보 등 다양한 서비스를 제공해줄 수 있다. 따라서 운송업체의 공차율을 줄이고 화주에게는 자신의 화물에 대한 정보를 실시간으로 전달해 줄 수 있다는 장점이 있다. 또한 이러한 육상물류중개시스템은 현재 개발중인 통합데이터베이스를 기반으로 한 항만물류원스톱서비스 시스템과 연계되어 차후에는 물류원스톱시스템으로 발전할 수 있을 것이다. 연구가 진행되고 있는 인공신경망과의 모형결합을 통해 기존연구와는 다른 새로운 통합예측방법론을 제시하고자 한다. 본 연구에서 제시하는 통합방법론은 크게 2단계 과정을 거쳐 예측모형으로 완성이 된다. 즉, 1차 모형단계에서 원시 재무시계열은 먼저 웨이블릿분석을 통해서 노이즈가 필터링 되는 동시에, 과거 재무시계열의 프랙탈 구조, 즉 비선형적인 움직임을 보다 잘 반영시켜 주는 다차원 주기요소를 가지는 시계열로 분해, 생성되며, 이렇게 주기에 따라 장단기로 분할된 시계열들은 2차 모형단계에서 신경망의 새로운 입력변수로서 사용되어 최종적인 인공 신경망모델을 구축하는 데 반영된다.ocioeconomic impacts are resulted from the program. It would be useful for the means of (ⅰ) fulfillment of public accountability to legitimate the program and to reveal the expenditure of pubic fund, and (ⅱ) managemental and strategical learning to give information necessary to improve the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and build up the practical socioeconomic ev