• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.1033-1042
• /
• 2020

Shale shaker which is one of the mud circulation systems is composed of a basket, a vibrator and a screen. Its purpose of a shale shaker is to induce drilling fluid to flow through a screen, transport solids across a screen surface, and discharge solids off the end of the screen. The new shale shaker for the on-shore drilling system is designed to be smaller than the original shale shaker which has the same capacity with the new on to enable to transport and to operate on the trailer. In this study, structural and vibrational analysis of shale shaker was carried out to evaluate the appropriateness of the design in terms of the structural stability.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.763-772
• /
• 2021

Drilling Mud Treatment Systems are widely used for Oil Gas drilling mud circulation, horizontal directional drilling mud recycling, geothermal drilling, mining, coal exploration drilling, water well drilling. Degasser is a device used in drilling to remove gasses from drilling fluid which could otherwise form bubbles. For small amounts of entrained gas in a drilling fluid, the degasser can play a major role of removing small bubbles that a liquid film has enveloped and entrapped. As with the desander, its purpose is to remove unwanted solids from the mud system. The smaller cones allow the desilter to efficiently remove smaller diameter drill solids. In this study, a simulation study is conducted on the degasser of the facility in the Mud Treatment System to conduct a performance review on the gas separation in the mud.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.4_2
• /
• pp.603-609
• /
• 2022

Bottom hole assembly(BHA) is a key component of the drilling system, consisting of various components and tools(including the drill bit and mud motor) which operate at the bottom of the wellbore and physically drill the rock. This paper investigates the dynamic characteristics of the mud motor which is a drilling propulsion tool. And computational structural analysis is performed to calculate the von-Mises stress and the safety factor of components constituting the mud motor. In this process, the field test data of onshore drilling are used for analysis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.121-123
• /
• 2021

선박중심직접통신(MX-S2X)은 디지털 통신 연계기술 개발 및 실증을 통한 육상·선박·시설의 유기적 연결을 제공함으로써, 해양사고 저감 및 자율운항선박을 위한 인프라로 활용될 수 있다. 본 논문은 MX-S2X 기술개발에 대한 소개, MX-S2X 개발을 위한 운용 및 설계 요구사항에 대해 기술하고 있으며, 더 나아가 해상 통신 환경이 통신성능에 영향을 끼칠수 있는 경우에 대해 살펴보고 이를 극복하기 위한 MX-S2X 시스템의 물리계층 설계에 대해 기술하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.136-138
• /
• 2021

본 논문은 경남무인선박 규제자유특구 혁신사업육성 실증 사업의 일환으로 선박해양플랜트연구소(KRISO) 주관으로 수행한 연구 개발 사업의 실증 시험 수행 및 성과에 관련된 내용임. 선박해양플랜트연구소 무인선 아라곤2호와 3호에 적용한 원격관제 시스템의 고도화 및 성능개선 관련 연구개발 수행 중이다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.427-428
• /
• 2022

최근 대규모 항만 건설 및 기존 부두 리모델링과 같은 해안 공간 구조물 확충사업이 활발하게 진행되고 있으며 항만 구조물 거동 장기계측을 위한 센서에 대한 관심도 높아지고 있다. 기존의 항만에 적용한 전기식 센서들은 수개월 정도 단기간의 구조물 거동 측정은 가능하지만 수년 이상의 장기계측 시 염수분에 의한 부식 및 내구성에 취약하기 때문에 원활한 측정에 한계점이 있고 센서 설치를 위한 항만 외곽지역 구조물과 육상전원공급설비 배전반 사이의 거리로 인하여 긴 연장의 횡단로 가설전선 보호대 등을 설치해야 하는 어려움이 있다. 따라서, 본 연구에서는 항만 구조물 거동 장기계측을 위해 기존 전기식 센서들의 부식문제점을 파악하여 해수용 4종 센서 IoT 모듈 패키징을 설계하고 외부 전원공급 방해 영향을 최소화한 태양광 발전을 적용한 항만 구조물 거동 계측 시스템을 제안하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.149-151
• /
• 2023

MX-S2X(선박중심직접통신)은 선박을 중심으로 한 D2D 통신을 통해 육상·선박·시설의 유기적 연결을 제공함으로써, 해양 분야의 4차 산업혁명에서 해상 통신 기술 인프라로서의 핵심 역할이 가능할 것으로 기대 된다. '초고속해상무선통신망 무설설비 다각화 및 통신연계 기술개발 '의 1단계 3차년도에서는 2차년도에 제작한 MX-S2X 1차 시제품에 대한 기능을 보완하고 ISM 대역의 소출력 요구사항을 만족하기 위한 DSSS을 적용하여 2차 시제품을 구현/제작하고 실제 해상환경에서 성능을 검증한다. 본 논문에서는 MX-S2X 2차 시제품에 대한 1, 2차 실해역 시험결과 및 향후 계획에 대해 공유한다.

• Journal of Navigation and Port Research
• /
• v.42 no.3
• /
• pp.167-176
• /
• 2018

A solar power generation system on single point moored offshore plant has independent power system In order to satisfy the maritime environment and account for the number of sunless days, it is important to supply stable electric power to the systems. For these reasons, solar panels are installed in multiple directions. However, a partial shading effect occurs because the amount of light incident on each panel is different. The generated power by the solar generation system installed on land is affected by the latitude, then it is installed at an angle of 30 to $45^{\circ}$. in the case of Korea. In the case of a solar power generation system installed in a mooring type of marine plant, there is a possibility that the maximum power point is outside of the controllable range due to the partial shading effect. Therefore, a power generation loss occurs. By reducing the light amount difference between both panels, the maximum power point can exist in a range where the MPPT algorithm can track the power. The purpose is so the power generation efficiency can be further increased. In this paper, simulation results show that the highest power generation efficiency is obtained at an installation angle of $20^{\circ}$.

• Journal of fish pathology
• /
• v.27 no.1
• /
• pp.77-83
• /
• 2014

The monitoring was performed to survey the mortalities and medications occurred in the inland aquaculture farms of olive flounder in South Korea from May to October, 2012. Both of the indirect inquiry for entire inland farms and the sample survey for selected farms were carried out. The aquatic organism disease inspectors, who have the national licenses for the diagnosis and prevention of aquatic organism diseases and have close relationship with the farms, investigated the rates and causes of mortalities according to the standard manual. The cumulative mortalities rate by the indirect inquiry on 565 farms, was calculated to 27.18%, and the mortalities rate by infectious diseases was 22.64%. Otherwise, the mortalities rate by sample survey on 60 farms was 25.50%, 19.33% of them were caused by infectious diseases. The high mortality rates were recorded by scuticociliatosis, non-infectious loss, streptococcosis, VHS, artificial eliminations, vibriosis and gliding bacterial disease. Streptococcosis and non-infectious mortality caused to serious loss in productivity and economy of the farms, because of their outbreaks in the flounder groups over 600 g. The monitoring of medications in the selected farms revealed that formalin for the treatment of external parasites, such as scuticociliates, was the most commonly used drugs in the farms. As the antibiotic medications, amoxicillin and florfenicol for streptococcosis, and oxytetracycline and neomycin expecting wide antibacterial spectrum, were frequently prescribed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1778-1785
• /
• 2014

In order to construct offshore structures safely, geotechnical investigation should be carried out with high accuracy. Up to now, onshore geotechnical investigation equipments installed on the barge are used for offshore geotechnical investigation. In this case, many limitations can be confronted such as deep water depth, high wave, strong current, severe wind and so on. For the safe and economic offshore geotechnical investigation with high precision, a seabed type unmanned automated site investigation equipment is developed. It can be operated remotely underwater conditions with 100m water depth and can explore the ground depth of 50m. Also, the standard penetration test (SPT), soil boring, soil sampling and rock coring can be possible using the equipment. Numerical analysis was conducted to secure the stability of the equipment against current of 4 knot. Energy efficiency of SPT apparatus which is attached to the equipment shows 78% in average.