• Journal of the Korean Ceramic Society
• /
• v.38 no.5
• /
• pp.474-478
• /
• 2001

유기 화학 기상 증착법(MOCVD)을 이용하여 반응기체 $O_2$의 양 및 Y와 Mn의 운반기체 비(Y/Mn)를 변화시켜가며 Si(100) 기판 위에서 MFSFET(metal-ferroelectric-semiconductor field effect transistor) 구조의 YMnO$_3$박막을 증착하였다. 반응기체 $O_2$의 양이 150sccm일 때 Y/Mn=2와 3인 경우 단일상의 육방정계 YMnO$_3$박막이 형성되었다. YMnO$_3$박막의 전기적 특성은 사방정계 YMnO$_3$박막에서는 나타나지 않았으나, 육방정계 YMnO$_3$박막의 경우 결정립 크기에 영향을 받아 단일상의 육방정계 YMnO$_3$박막 중 결정립 크기가 150nm~200nm(Y/Mn=2)인 경우에는 잔류분극이 100nC/$ extrm{cm}^2$인 P-E 이력곡선의 특성을 나타내었다.

• Journal of the Korean Magnetics Society
• /
• v.17 no.4
• /
• pp.152-155
• /
• 2007

We have studied electronic structures and magnetic properties of $YMnO_3,\;ScManO_3$ with hexagonal structure using Full Potential Linearized Augmented Plane Wave (FLAPW) method based on LSDA method. LSDA calculation results show that multiferroic $YMnO_3$ shows energy gap due to hexagonal symmetry and magnetic interaction. Because of insulating gap and small Y ion, $YMnO_3$ shows magnetic and ferroelectric state. However, $ScMnO_3$ does not show the energy gap because of strong hybridization of Mn-O for LSDA calculation. We confirmed the stability of multiferroic state for $YMnO_3\;and\;ScManO_3$ using total energy calculations. The antiferromagnetic and ferroelectric states have the lowest energy about 100 meV.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.2
• /
• pp.75-81
• /
• 2011

Hydroxyapatite (HAP) crystals with hexagonal structure have been successfully synthesized by using EDTA(ethylene diamine tetraacetic acid) as chelate under hydrothermal condition. The as-prepared HAp powders were characterized by XRD and SEM. The XRD result indicated that the products were preferentially oriented along c-axis. The SEM photographs showed that the morphology of the HAp crystals was well controlled by the reaction parameters such as temperature, pH value, and the molar ratio of EDTA/Ca.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.149-160
• /
• 1993

표면성장법을 이용한 고강력, 고탄성률 섬유의 제조시, 결정화 온도에 따른 섬유 미 세구조와 물리적 성질의 상관 관계를 미세구조적, 열역학적 관점에서 규명하고자 초고분자 량 폴리에틸렌으로 섬유를 제조하고 결정화 온도에 따른 구조와 인장 성질의 변화를 용융 거동을 중심으로 관찰하였다, 일정길이하에서의 섬유의 용융인 제한 용융에서는 고분자 사 슬배좌의 구속으로 인해 사방정계-육방정계 전이가 일어났다 제한 용융 거동으로부터 라멜 라 구조와 펼쳐진 사슬 결정 부분을 분리할 수 있었으며 결정화 온도가 증가할수록 펼쳐진 사슬 결정의 양이 증가하였다. 결정화 온도가 증가할수록 쉬시-케밥구조에서 펼쳐진 사슬 구조로의 변화가 일어났으며 결정내의 결점도 줄어들었다. 결정화 온도가 증가할수록 구조 의 변화로 인해 인장 성질이 향상되었다. 인장 성질은 펼쳐진 사슬 결정의 양에 큰 영향을 받았다. 인장 강도는 펼쳐진 사릉의 양과 사슬내의 결점들에 의해 큰 영향을 받았으며 인장 탄성계수와 절단 신도는 인장 강도보다 펼쳐진 사슬의 양에 더 크게 영향 받았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.92.2-92.2
• /
• 2010

Selenium 물질은 지구상에 많은 양이 존재하고, 가격이 저렴하다. 그 성질은 분광감도가 시감도에 잘 일치하고, 광학적 특성이 뛰어나서 태양전지로 연구도 활발히 진행 중이다. 본 연구에서는 Se박막을 열저항증착방법을 이용하여 증착시, 기판온도를 변화를 시켜 그 구조적특성의 변화를 관찰하였다. $50^{\circ}C$에서 변화를 시작하여 $70^{\circ}C$, $100^{\circ}C$의 변화에서 각각 단사정계, 육방정계 결정구조가 나타났다. XRD 분석결과 $100^{\circ}C$에서 증착한 sample의 회절강도가 $70^{\circ}C$에서 증착한 sample보다 작은회절강도를 나타내었다. 추후 열처리공정등을 통하여 보완하면, CISe 박막 화합물 태양전지 연구에 큰 효과를 나타낼 수 있을 것으로 예상된다.

• Electrical & Electronic Materials
• /
• v.7 no.1
• /
• pp.49-56
• /
• 1994

Polycrystalline CdS thin films were deposited by using EBE method and its crystal structure, surface morphology, electrical and optical properties as a function of annealing temperature were investigated. It was found that optimum growth conditions were substrate temperature annealing temperature 300[.deg. C]. The films were hexagonal structure preferred(002) plane and maximum grain size was 421[.angs.]. As the results, resistivity and optical transmittance of CdS thin films were $8.3{\times}{10^3}$[.ohm.cm] and 89[%] respectively.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.620-626
• /
• 2015

$Ho^{3+}$ doped $SrAl_2O_4$ upconversion phosphor powders were synthesized by spray pyrolysis, and the crystallographic properties and luminescence characteristics were examined by varying activator concentrations and heattreatment temperatures. The effect of organic additives on the crystal structure and luminescent properties was also investigated. $SrAl_2O_4:Ho^{3+}$ powders showed intensive green emission due to the $^5F_4/^5S_2{\rightarrow}^5I_8$ transition of $Ho^{3+}$. The optimal $Ho^{3+}$ concentration in order to achieve the highest luminescence was 0.1%. Over this concentration, emission intensities were largely diminished via a concentration quenching due to dipole-dipole interaction between activator ions. According to the dependence of emission intensity on the pumping power of a laser diode, it was clear that the upconversion of $SrAl_2O_4:Ho^{3+}$ occurred via the ground state absorption-excited state absorption processes involving two near-IR photons. Synthesized powders were monoclinic as a major phase, having some hexagonal phase. The increase of heat-treatment temperatures from $1000^{\circ}C$ to $1350^{\circ}C$ led to crystallinity enhancement of monoclinic phase, reducing hexagonal phase. The hexagonal phase, however, did not disappear even at $1350^{\circ}C$. When both citric acid (CA) and ethylene glycol (EG) were added to the spray solution, the resulting powders had pure monoclinic phase without forming hexagonal phase, and led to largely enhancement of crystallinity. Also, N,N-Dimethylformamide (DMF) addition to the spray solution containing both CA and EG made it possible to effectively reduce the surface area of $SrAl_2O_4:Ho^{3+}$ powders. Consequently, the $SrAl_2O_4:Ho^{3+}$ powders prepared by using the spray solution containing CA/EG/DMF mixture as the organic additives showed about 168% improved luminescence compared to the phosphor prepared without organic additives. It was concluded that both the increased crystallinity of high-purity monoclinic phase and the decrease of surface area were attributed to the large enhancement of upconversion luminescence.

• Korean Journal of Crystallography
• /
• v.3 no.1
• /
• pp.31-36
• /
• 1992

6, 9-Difluoro-11, 21-dihydroxyl-16, 17-[(1methylehtylidene)bis(oxy)]-pregna-1, 4-diene-3, 20-dione (fluorocinolone acetonide) , C24H3OF106, trigonal, R3 (defined as a hexagonal lattice), a =b = 17.896 k, c: 18.365 k, V=5094.3 A', Z=9, 1 (MoK a) =0.7107 A, D=1.31 g/cm3, D.: 1.328 g/cm3 T=298 K, final R=0.050 for 1101 unique observed reflections. The molecule has conformational features in common with other corticosteroids. Three molecules related by 3-fold symmetry are involved in hydrogen bonding, forming a layer of molecules perpendicular to the c-axis.

• Electrical & Electronic Materials
• /
• v.17 no.5
• /
• pp.13-20
• /
• 2004

1996년 GaN와 near band edge emission(NBE) 및 yellow deep-defect level emission의 발광 기구가 ZnO의 greene mission과 매우 유사하다는 점이 발견된 이 후［1,2］, II-VIZnO반도체에 대한 광학적 성질에 많은 관심이 집중되기 시작하였다. 1960년대 C. Klingshirin［3］에 의해 bulk ZnO의 exciton luminescence가 관측된 이래로, 1980년대 후반부터 적층 박막 성장 법들이 급속도로 발전을 하여 오고 1988 S. Bethke등이 CVD로 성장한 ZnO의 NBE emission에 관심을 갖기 시작하였고［4］, 1996년 2K에서 GaN, ZnO사이의 유사한 발광기구가 알려졌고［5］, 도호쿠 및 일본 공업대에서 ZnO의 적층 성장 및 상온에서 defect에 기인한 emission이 없는 깨끗한 PL 의 관측, 상온 lasing, 육방정계 결정 구조에서 비롯된 6-fold symmetry PL 등이 보고되기 시작하였다. ［6-8］ 2000년에 들어서면서 MgO와 CdO와의 solid solution에 의한 밴드갭을 2.6-4.2 eV 까지 조절하는 가능성이 보고되었고 이를 이용한 ZnO/MgZnO MQW 구조에 대한 연구도 병행되었다.(중략)

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.87-94
• /
• 1993

CdS and Se thin films were deposited on slide glass by EBE method respectively and surface morphology, crystal structure, electrical and optical properties were investigated by substrate temperature and annealing. The deposited CdS film was well fabricated with cubic structure at substrate temperature of $150^{\circ}C$. Se film was deposited with noncrystal structure until substrate temperature of $100^{\circ}C$, but Se film was grown with monoclinic structure at substrate temperature of $150^{\circ}C$. And so, after annealing at $150^{\circ}C$ for 15min, noncrystalline Se was proved to be hexagonal structure. Finally, the maximum output of Se/CdS heterojunction at 5000 lux was 4 $mW/cm^{2}$ and maximum spectral sensitivity was represented at 585nm.