• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.531-539
• /
• 2008

The purpose of this study is to investigate the mechanical properties of high strength concretes reinforced with hooked steel fiber. For this purpose, total 36 specimens whose variables are concrete compressive strength, steel fiber aspect ratio, and steel fiber volume contents, are made and tested. From the test results including previous research work, flexural performance of steel fiber reinforced high strength concrete is evaluated in terms of flexural strength and toughness index. Flexural behavior of steel fiber reinforced high strength concrete is enhanced with respect to the fiber volume content, the aspect ratio, and concrete compressive strength. More efforts are devoted to evaluate quantitatively between the flexural strength and the structural parameters such as the fiber volume content, the aspect ratio, and concrete compressive strength.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.7-16
• /
• 1999

Stoichiometric and nonstoichiometric $Y_{3-x}Fe_{5+x}O_{12})$ polycrystalline samples (x=0.00, 0.05, 0.10, 0.30, -0.05, -0.10, -0.30) were prepared by solid state reaction method. The magnetic properties of the sample were investigated by FMR (ferromagnetic resonance) technique at microwave frequency 5.11 GHz (G-band) and 23.39 GHz (K-band) respectively. The spectroscopic splitting factor g were estimated to be 2.04~2.35 from the derivative absorption lines. As the samples became yttrium $(Y^{3+})$ excess and iron $(Fe^{3+})$ excess, Magnetizations were decreased. But resonance linewidth were increased. To investigate the anisotropy, the angular dependence of resonance magnetic fields were measured. Angular dependence of effective magnetizations were measured by FMR from 77 K to 300 K at K-band microwave frequency (23.39 GHz) and the saturation magnetizations were measured by VSM. The Bloch coefficients B and C were determined by fitting. $M_{eff}(0)$ was obtained by the extrapolation from 80 K. From this result, the spin wave stiffness constant D $(about\; 162~206 \;eV{\AA}^2)$and average square range of exchange interaction $$$(about \;5.84~12.13\;{\AA}^2)$ were determined.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.209-216
• /
• 1987

The experiments were carried out in lab. as well as in pots, to develop the agricultural usage of water swellable polymer, a kind of polyacrylic acid(K-sorb) synthesized by the Korea Advanced Institute of Science & Technology (KAIST) recently. The changes of soil physical properties and the influences to crops were investigated with various levels of K-sorb. When the K-sorb mixed with soils and soaked up distilled water, the volume of soils increased with the increase of soil available water contents and increase of K-sorb application levels. The rate increase of soil available water was higher in the coarse textured soils than in the fine while the swelling rate of soil volume showed adverse tendencies. A positive linear regression was observed between the contents of available soil water and levels of K-sorb. K-sorb application decreased bulk density and hardness due to the increase of porosity after soybean cultivation. The permeability in coarser textured soils such as sandy and coarse loamy families was decreased with the increase of K-sorb but in the medium textured soils it was opposite. At higher levels of K-sorb, about 0.5%, the permeability abruptly decreased due to dispersion and vertical movement in silty soils, while it was not changed in fine clayey soils but has the same trend with silty soils. In the plot of 0.3% of K-sorb application, the growth of soybean such as number of pods and stem length etc. increased and the yield also increased about 1.2-1.8 times of control. The optimum amounts of K-sorb were slightly different according to soil texture but estimated from regression curves were about 0.2% to 0.35% of soils in dry weight bases.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.33-43
• /
• 1986

Long-term fertilizer application have been carried out at experimental farm of the Yeongnam Crop Experiment Station from 1967 to 1983 to obtain basic informations about longterm effect of fertilizer regime, especially, compost and chemical fertilizer on the soil chemical properties and the rice growth. 1. Rice yields obtained from the non-fertilized plot and PK applied plot were significantly reduced compared to NPK applied plot by 43% and 53%, respectively, primarily due to decrease of leaf area, crop growth rate, number of panicles and number of spikelets and delayed flowering. 2. No visible phosphorus-symptom and yield loss were obserbed at the plot that phosphorus was not included even though phosphorus content in the soil and rice plant were lowered. 3. The plot that was not received potassium resulted in yield loss by 9% compared to NPK applied plot due to decrease in potassium content in soil and rice plant, and spikelt number. 4. Available phosphorus, silica, and exchangeable potassium in soil significantly increased by adding compost to NPK applied plot and hence, increased grin yield by 6 to 9% compared to applied plot through improvement of nutrient uptake efficiency. 5. Grain yield of compost applied plot lowered by 30% than NPK applied plot due to decreased nutrient uptake efficiency and delayed rice growth while this yield was higher than Non-fertilized plot.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.95-101
• /
• 2006

This study was conducted to establish a low-input fertilization technique and increase of fertilization efficiency using the band spotty applicator(1999-2000) during the cultivation of mulching for chinese cabbage(Brassia campestris L.). The obtained results such as nitrogen efficiency, yield and soil improvement after cultivation of chinese cabbage were as follows. The content of $NO_3-N$ in soil increased in band spotty fertilization(BSF) by increasing application rate from the beginning stage to the middle stage. The content of total nitrogen increased but content of organic matter, available phosphate and exchangeable potassium decreased in comparison with the soil before experiment. Growth rate of Chinese cabbage increased in band spotty fertilization plot and uptake amount of nitrogen fertilized for chinese cabbage increased by increasing of the application rate. N use efficiency was higher by 5-21% in band spotty fertilization plot than in conventional fertilization(CF) plot. Yield of chinese cabbage increased by 16% in 70% band spotty fertilization plot and increased by 20% in 100% band spotty fertilization plot. It was found that 70% band spotty fertilization was more effective as fertilization method to reduce both environmental pollution and chemical nitrogen fertilizer in plastic film mulching cultivation.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.810-817
• /
• 2015

This study was conducted to evaluate the pressure treatment characteristics of yellow poplar skin timber with ACQ-2, CUAZ-3, and CuHDO-1. The effect of moisture content (MC) on treatability was investigated, and fixation characteristics of copper-based preservatives were also evaluated. Sapwood of yellow poplar, which was dried below 50 percent MC, was fully penetrated with preservatives, and minimum requirement of preservative retention for the hazard class H3 was achieved. Through measuring retention gradient in yellow poplar sapwood, it was confirmed that minimum requirement of preservative retention for the hazard class H3 was achieved in the assay zone from the surface to 15 mm-depth when the specimens were dried below 30 percent MC. Yellow poplar heartwood did not meet the minimum requirement of penetration and retention for the hazard class H3 over the range of pretreatment MCs tested. The fixation rate of copper was much faster under drying condition compared with nondrying condition; more than 90% of copper were fixed in 3 weeks at $21^{\circ}C$ under drying conditions.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.84-93
• /
• 2016

Plant factories with artificial lights require a large amount of electrical energy for lighting; therefore, enhancement of light use efficiency will decrease the cost of plant production. The objective of this study was to enhance the light use efficiency by using filters to diffuse the light from LED sources in plant factory conditions. The two treatments used diffuse glasses with haze factors of 40% and 80%, and a control without the filter. For each treatment, canopy light distribution was evaluated by a 3-D ray tracing method and canopy photosynthesis was measured with a sealed acrylic chamber. Sixteen lettuces for each treatment were cultivated hydroponically in a plant factory for 28 days after transplanting and their growth was compared. Simulation results showed that the light absorption was concentrated on the upper part of the lettuce canopy in treatments and control. The control showed particularly poor canopy light distribution with hotspots of light intensity; thus the light use efficiency decreased compared to the treatments. Total light absorption was the highest in the control; however, the amount of effective light absorption was higher in treatments than the control, and was highest in treatment using filters with a haze factor of 80%. Canopy photosynthesis and plant growth were significantly higher in all the treatments. In conclusion, application of the diffuse glass filters enhanced the canopy light distribution, photosynthesis, and growth of the plants under LED lighting, resulting in enhanced the light use efficiency in plant factory conditions.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.331-337
• /
• 2023

Physiological disorders in pear fruit are mainly caused by problems during the growing season, such as lack of calcium in the soil, poor drainage, low porosity, vigorous pruning, and excessive fruiting. In this study, soil physicochemical properties and leaf characteristics were analyzed in pear orchards in four regions of Korea where chlorosis symptoms occurred to determine the causes of chlorosis. The color of chlorotic leaves was diagnosed using the naked eye or SPAD and Hunter values. The soil of the chlorotic orchard had a significantly higher soil pH than that of the regular orchard. Although adequate soil depth was not significantly associated with chlorosis, combined with over-fertilization of the soil with lime, it could potentially impair plant iron uptake. Chlorotic leaves had significantly lower iron and calcium contents and significantly higher magnesium contents than those of regular leaves. Therefore, the intensive occurrence of chlorosis during secondary shoot development around June and July when it is hot and humid may be due to impaired iron and calcium absorption, leading to physiological disorders. To solve this problem, avoiding the over-application of lime and applying foliar fertilizers containing chelated iron is recommended.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.5
• /
• pp.340-349
• /
• 2013

The present paper investigates the availability of seawater as the absorbents to capture carbon dioxide ($CO_2$) emitted from the coal fired power plant (CFPP). For the purpose of the study, readily obtainable alkali materials in CFPP such as coal fly ash (FA), NaOH and $Ca(OH)_2$ are added to seawater to prepare the absorbents and their $CO_2$ capture performances are discussed. FA can be effectively used the additives to increase $CO_2$ capture capacity of seawater to a some extent. This is ascribed that some alkali components in FA are leached into seawater and they contribute to $CO_2$ capture in the solution. However, their leaching amount and rate are restricted by the various ions in seawater. The performance of NaOH added seawater is even lower than that of NaOH added water because $OH^-$ is substantially consumed on $Ma(OH)_2$ production prior to carbonation. $CO_2$ absorption capacity of $Ca(OH)_2$ added seawater is slightly larger than that of $Ca(OH)_2$ added water. This is because that $Ca^{2+}$ which originally present in raw seawater can participate in carbonation reaction.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.356-362
• /
• 1999

Based on the assumption that film density increases exponentially with exposure in the industrial radiographic film. an equation representing the characteristic curves of industrial radiographic films and a new density-thickness relation are suggested. The accuracy and reliability of the suggested relation has been tested using radiographs of a carbon steel step wedge with known thickness variation by polychromatic X-ray and ${\gamma}$-ray ($Ir^{192}$). The experimental results were well agreed to the proposed relation in the range of film densities from 1.0 to 3.5 and it was more accurate than the conventional relation. It is also found that ${\gamma}$-ray is more effective in this purpose than polychromatic X-ray, which results in variation of effective linear absorption coefficient due to beam hardening effect as thickness increases. Therefore using the equation and experimentally determined parameters the quantitative evaluation of thickness variation is possible and it can be used to evaluate the depth of local corrosion of pressure vessels in plants.