• Journal of Hydrogen and New Energy
• /
• v.34 no.6
• /
• pp.712-721
• /
• 2023

While hydrogen is widely used, it has a low minimum ignition energy, raising safety concerns when using it. This research studied which parameters are the key variables in the hydrogen release and diffusion. These parameters were divided into six process variables in the initial release and two environmental variables in the dispersion. One hundred and twenty cases were selected through design of experiment, and the end-point in each case were analyzed using PHAST. Afterwards, an end-point prediction model was developed using RSM and ANOVA, and the impact of each variable on the endpoint was analyzed. As a result, the influence of eight variables was graded. The nozzle diameter had the greatest influence on the end-point, while the pipe roughness coefficient had no effect on the end-point. It is expected that these results will be used as basic data to improve safety across all fields of hydrogen handling facilities.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.199-208
• /
• 1994

In this study, the ultrasound which provides the properties of mixing, and surface cleaning effect, the increase of the effective reaction surface area and the enhancement of the effective collision frequency, was used to enhance the recovering efficiency of Cu from the Cu-ion containning waste water. The ultrasonic reactor used in this study was designed and constructed for improving the disadvantage of the existing ultrasonic reactor. From the experimental result and its analysis, we obtained following conclusions. 1. The ultrasound increased the rate of electrochemical deposition to 582.2% in maximum at the condition of $0.1M-CuSO_4$, and 2.1 V-overpotential. 2. The enhancement effect of ultrasound induced by the reduction of diffusion layer thickness was 277.8% in maximum and induced by the other effect except for the reduction effect of the diffusion layer thickness was 253.6% in maximum at $0.1M-CuSO_4$ and 2.1V overpotential. 3. This study gave the possibility of the scale-up of ultrasonic reactor and in particular, ultrasonic reactor would be effective in the treatment of waste water containning a low concentration of Cu ion.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.385-390
• /
• 1998

방사성 페이온교환수지 아스팔트고화체를 처분장 등지에서 장기간 저장시 안전성 확보를 위하여 물리적 강도가 높고 고화체내에서 방사성핵종의 침출저항성 및 처리시 감용의 효과가 우수한 고화체 연구가 필요하게 되었다. 실험에 사용된 이온교환수지는 입상형 양이온 교환수지를 대상으로 하였으며 고화매질로서는 도로포장용으로 생산되는 직류아스팔트 60/70을 사용하였다. 고화보조제는 방사성 고체패기물 포장시 사용되어 폐기물로 발생되는 페폴리에틸렌(폐PE) 필름을 사용하였다. 실험결과 고화체의 형태안정성은 PE 함유량이 10 wt% 이상일 때 고화체 형태를 그대로 유지할 수 있으며 압축강도는 414 kPa(60 psi) 이상을 나타내었다. 최적의 운전조건은 이온교환수지, PE 함유량이 건조기준으로 각각 30~50 wt%, 10~25 wt% 이며, 고화온도는 170~20$0^{\circ}C$이다. 고화체의 침출특성은 확산 (diffusion) 으로 해석이 가능하며, 유효확산계수(De)는 Cs, Co의 경우 각각 1.621$\times$$10^{-7}$, 1.186$\times$$10^{-9}$ $\textrm{cm}^2$/day로 나타나고, Leachablity index는 각각 11.7, 13.8로 미국 원자력위원회 (NRC)가 요구하는 기준값 6보다 훨씬 높게 나타났다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.426-435
• /
• 2002

In this paper we present an indoor propagation model for indoor wireless LAN service in the ISM band. We primarily use a 3D ray tracing as well as a patch scattering model in order to take into account the indoor fixtures. Therefore input parameters such as indoor environment parameters and antenna's types, polarizations are considered. As the results, we present fading characteristics and rms delay spread from time delay spread. In order to investigate the accuracy of the presented model, comparisons of predictions with measurement and simulations are performed in indoor wireless LAN service environments. The results show that measurements and simulations are very similar. Therefore in this paper, the effect of presented indoor propagation model is confirmed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3297-3304
• /
• 1994

Experimental investigation have been made to study the double-diffusive nature of convection of an initially stratified salt-water solution heated from below in a cylindrical cavity. The objective is to examine the process of mixed-layer formation, the flow phenomena, the heat transfer characteristics, and temperature and concentration distribution according to the changes in the effective Rayleigh number based on the reference height which represents the relation of temperature and concentration gradient. The types of initially formed flow pattern are categorized in three regimes depending on the effective Rayleigh number ; stagnant flow regime, single mixed-layer flow regime and successively formed multiple mixed-layer flow regime. The temperature and concentration profiles are both uniform in each layer due to convective mixing in the layered flow regime, but both linear in stagnant flow regime and single mixed-layer flow regime. At the interface between adjacent layers, the temperature changes smoothly but the concentration changes rapidly. The layers expand by diffusion of concentration through the interface along with its random fluctuation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.4
• /
• pp.371-378
• /
• 1992

In this paper we report the fabrication of a planar optical wavehuide lens on a Y-cut LiNbO3 substrate by Ti_indiffusion and Ti-indiffused proton-exchange(TIPE). LiNbo3 planar waveguides are fabricated and refractive indices of the waveguides are fabricated and refractive indices of the waveguides are measured. Based on the measured indices, palanr waveguide lenses are designed and fabricated. The measured focal point and spot size of the fabricated lens are in good agreement with those of the designed lens.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.175-184
• /
• 1999

A theoretical study on the turbulent round jet diffusion flame impinging on the wall was carried out to predict the characteristics and structure of Impinging jet flame and heat transfer to the wall. Finite chemistry via Arrhenius equation and eddy dissipation model was adopted as a combustion model, and the Favre averaging and $k-{\varepsilon}$ model were Introduced In the theoretical modeling. The SIMPLE algorithm was applied to the calculation. All the transport properties were considered as the variable depending on the temperature and composition. For the parametric study, the distance from nozzle to impinging wall and Reynolds number at nozzle exit were chosen 88 the major parameters. As the results of the present study, the characteristics of flow fields, the distributions of main variables and each chemical species and the flame shapes were obtained. The heat transfer rate from the flame to the wall and the effective heating area were calculated to investigate the Influences of the major parameters on the heat transfer characteristics.

• The KIPS Transactions:PartB
• /
• v.16B no.2
• /
• pp.141-150
• /
• 2009

This paper proposes a system that can automatically write singing voices to music notes. First, the system uses Stabilized Diffusion Equation(SIDE) to divide the song to a series of syllabic parts based on pitch detection. By the song segmentation, our method can recognize the sound length of each fragment through clustering based on genetic algorithm. Moreover, this study introduces a concept called 'Relative Interval' so as to recognize interval based on pitch of singer. And it also adopted measure extraction algorithm using pause data to implement the higher precision of song transcription. By the experiments using 16 nursery songs, it is shown that the measure recognition rate is 91.5% and DMOS score reaches 3.82. These findings demonstrate effectiveness of system performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.10
• /
• pp.903-910
• /
• 1998

Ti:LiNbO$_3$ optical waveguides have been fabricated by Ti-diffusion in wet oxygen atmosphere. The fabrication conditions of furnace temperature, diffusion time and bubbler temperature were 105$0^{\circ}C$, 8 hours and 9$0^{\circ}C$, respectively and Ti thickness was varied from 700$\AA$ to 1500$\AA$. In this paper, the nearfield patterns, mode sizes (hirizontal/vertical) and insertion loss of waveguides were discussed at wavelength 1550 nm ad function of Ti thickness. With the planar waveguide, the effective index change and diffusion depth were calculated at 632.8nm using the prism coupling method. From these results, the best Ti thickness in our conditions seems like to by 1200$\AA$~1300$\AA$.

• The Korean Journal of Zoology
• /
• v.34 no.4
• /
• pp.452-459
• /
• 1991

담수산 대형 아메바인 각moeba proteus의 위상차 현미경 관찰 및 사진 분석을 통하여 수축포의 배출활동을 조사하f:다. Chalkley's 무기 염류 배양액에 첨가한 0. 1 mM ATP(disodium salt)에 의해 수축포의 배출속도는 270%로 증가하f:으며, 이 ATP의 효과는 Na+ 이온농도가 0.46mM 이상일 때 유효하였다. 실험용액의 NaGl 농도를 10 mM까지 증가시켰을 때 배출작용은 230%에 이르기까지 완만한 직선적 증가를 보였으며, 0.1 mM ATP를 첨가했을 때는 소폭의 NaCl농도 증가(0.50 mM)에 대하여 급격한 상승을 보였다. 이 배출 촉진은 Na+이온에 대해서 선별적으로 이루어졌으며 K+이온으로는 대체될 수 없었다. 배출속도는 Cac12를 제외한 Chalkley's 액에 50 $\mu$ M EDTA(disodium)를 첨가하였을 때에는 2900ye로 증가하였으며 , Caclf 농도가 증가됨에 따라 현격한 감소를 보였다. Chalkley's용액의 Cac12, NaCl을 함께 제외한 경우 배출속도는 대조군 수준에 미달된 데 비하여 0.2 mM Cac12, 10 mM NaCl첨가시에는 대조군의 180%였다. 아메바 수축포의 배출작용이 Na+이온 배출기구로 보고(Pottier efaf., 1987) 이들 결과를 종합해 볼때 아메바의 세포막에는 Na+ 이온의 투과수단으로 칼슘제거에 의해서 촉진확산되는 것과 Na+이온 농도증가에 따른 단순확산이 있을 것으로 사료된다.