• Journal of Labour Economics
• /
• v.29 no.2
• /
• pp.29-66
• /
• 2006

This study investigates the structural change of wage determination within internal labor market that have occurred around the financial crisis in 1997 by using the personnel data(1996~2000) of a Korean large firm. We take the effect of performance-based pay system to apply on wage determination of workers using Mincerian earnings function estimation. After introducing the annual salary system in the firm, we did not find the fact that the wage effect of seniority decreases, but we found the wage effect of relative evaluation ratings increases. Then, this study identifies the importance of the reward strategy of firm in Korean internal labor market. Finally, we have concluded that although the firm acknowledged the positive effects of performance-based HRM practices, we have not obtained enough evidence on the transformation into such practices because the seniority-based HRM has been traditionally prevalent in the Korean internal labor market.

• Journal of the Korean Vacuum Society
• /
• v.12 no.2
• /
• pp.144-149
• /
• 2003

Carbon tips were grown on Si cantilevers by applying an electron beam to them directly with Scanning Electron Microscope. A carbon tip was fabricated by aligning the electron beam directly down the vertical axis of Si cantilever and then irradiating a single spot on the cantilever for a proper time in the dominant atmosphere of residual gases generated by the oil of the diffusion pump. A number of control parameters for SEM, including exposure time, acceleration voltage, emission current, and beam probe current, were allowed to make various aspect ratio feature. The growth of carbon tips was not affected by the surface morphology of substrates. We could acquired the tip whose effective length is 0.5 $\mu\textrm{m}$, bottom diameter is 90 nm and cone half angle $3.5^{\circ}$ The growth technique of the high aspect ratio carbon tips on the tip-free cantilevers is available to reduce the complexities of fabricating sub-micron scale tips on the PZT thin film actuator integrated AFM cantilevers.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.573-583
• /
• 2000

Activated carbon fibers (ACFs) were prepared from various precursors of plantic, synthetic, and mixed fabrics of viscous rayon and cotton. Their adsorption performances of phenol and methylene blue in aqueous phase were evaluated through their adsorption isotherms, adsorption rates and breakthrough curves. The two adsorbates showed type I adsorption isotherm on ACFs. Adsorption rates to ACFs were 100 fold faster than to GAC. The effective diffusion coefficients of the adsorbates in ACFs were twenty fold greater than in GAC. The ACFs removed completely ten organic pollutants from a prepared water specimens through the 2nd column of a natural filtration method where 50 L of the water samples were treated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.25-30
• /
• 2017

Millimeter wave (mmWave) bands are expected to improve date rate of 5G systems due to the wide available bandwidth. While severe path loss in those bands has impeded the utilization, short wavelength enables a large number of antennas packed in a compact form, which can mitigate the path loss. However, estimating the channel with a conventional scheme requires a huge training overhead, hence an efficient estimation scheme operating with a small overhead needs to be developed. The sparsity of mmWave channels caused by the limited scatterers can be exploited to reduce the overhead by utilizing compressed sensing. In this paper, we introduce compressed sensing techniques for mmWave channel estimation. First, we formulate wideband channel estimation into a sparse recovery problem. We also analyze the characteristics of random measurement matrix constructed using quantized phase shifters in terms of mutual incoherence.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.485-499
• /
• 1999

Auctions are appealing market-type mechanisms because they can be deployed to solve the twin problems of resources pricing and allocation. Nonetheless the effectiveness of an auction mechanism in radio spectrum property rights should not be taken for granted. Policymakers need to be aware of the complexity of introducing market discipline in an area where none existed before. Auction design is critical to the success of the allocation process. However, a poorly designed auction mechanism can have detrimental effects on the spectrum rights allocation process. This study discusses some of the key elements and issues of auction design of radio spectrum rights for its efficient allocation. Particularly this study discusses, based on the existing auction theory and other countries' experiences, such issues as bidding rule, value interdependency and sequence of auction, information structure and asymmetric bidder, and wealth constraints and imperfect capital market.

• Nuclear Engineering and Technology
• /
• v.15 no.4
• /
• pp.267-279
• /
• 1983

An analytical system has been established for scrutinizing both uranium- and plutonium-fueled lattices moderated by light water. This system consists of two primary codes. One is a unit cell program called KICC, which has theoretical foundation on the models of GAM and THERMOS incorporated with appropriate approximate treatments for various phenomena, whereas the other is a multi-dimensional diffusion-depletion program entitled KIDD. The adequacy of this system is verified by performing extensive benchmark calculations on a variety of critical experiments. The average value of effective multiplication factors for the selected nineteen UO$_2$ critical experiments of heterogeneous lattice structure is calculated to be 1.0006 with a standard deviation of 0.0039. Power distributions have also been calculated for some critical experiments fueled with both uranium and plutonium of varying concentrations. The maximum percentage difference between the measured and calculated power distributions appears to be less than 5%. This result, together with the previously reported result, illustrates that the KICC/KIDD system is a very effective tool for the analysis of a light water reactor core.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.408-422
• /
• 2000

In this paper, we propose a generalized vector channel model for wireless communication systems using antenna arrays. The proposed channel model reflects path loss. spatial-temporal variation of shadowing, multipath fading , Doppler effect, spatial distribution of local scatterers and delay spread due to remote dominant scatterers. In addition, we use a discrete ray model in which respective ray signal experiences independent shadowing, fading and Doppler shift, and impinges on antenna arrays at a distinct angle. Based on the proposed mode. we derive the relations on the spatial and temporal correlations of the received signals and implement a spatial channel simulator. By comparing the theoretical values with the simulated ones, we verify the effectiveness of the implemented simulator. The simulator is then used to generate an arbitrary channel impulse response and to analyze the channel characteristics under various environments.

• The KIPS Transactions:PartA
• /
• v.16A no.5
• /
• pp.381-388
• /
• 2009

The spread of wireless Internet technology development and applications with location information in the form of location-based services are becoming more diverse. In particular, where you recognize the location of objects such as people and things and to provide valuable services based on the ubiquitous and location-based services are emerging as an important service. The collision between the vehicle position measurement in this thesis and offers related service system. Used in the proposed system, the GPS PACKET with information about the location and time of collision for the vehicle crash, the vehicle consists of a NodeID. Cause a conflict between these data at the vehicle, the vehicle through the gateway from the server to decide whether to go on to determine that an emergency situation, Emergency Center, the location information and giving information about whether the conflict is measured. Also, for such an emergency, such as a family on the outside of the wireless terminal related to Wireless (PDA, Phone) is to let me know. The server to want to save the crash information to the database of configuration. Additionally, the proposed U-LBS system to verify the validity of the experiment was performed.

• Journal of KIISE
• /
• v.42 no.8
• /
• pp.979-989
• /
• 2015

Machine to Machine (M2M) technology has gained attention due to the fast diffusion of Internet of Things (IoT) technologies and smart devices. Most wireless network experts believe that Bluetooth Low Energy (BLE) Communications technology in an iBeacon network has amazing advantages in terms of providing communication services at a low cost in smartphone applications. Specifically, BLE does not require any pairing process during its communication phases, so it is possible to send a message to any node without incurring additional transmissions costs if they are within the BLE communication range. However, BLE does not require any security verification during communication, so it has weak security. Therefore, a security authorization process would be necessary to obtain customer confidence. To provide security functions for iBeacon, we think that the iBeacon Message Encryption process and a Decryption (Authorization) process should be designed and implemented. We therefore propose the BLE message Authorization Mechanism based on a One Time Password Algorithm (BLE-OTP). The effectiveness of our mechanism is evaluated by conducting a performance test on an attendance system based on BLE-OTP.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.516-521
• /
• 2010

In this paper, we propose a video-based intelligent unmanned fire surveillance system using fuzzy color models. In general, to detect heat or smoke, a separate device is required for a fire surveillance system, this system, however, can be implemented by using widely used CCTV, which does not need separate devices and extra cost. The systems called video-based fire surveillance systems use mainly a method extracting smoke or flame from an input image only. The smoke is difficult to extract at night because of its gray-scale color, and the flame color depends on the temperature, the inflammable, the size of flame, etc, which makes it hard to extract the flame region from the input image. This paper deals with a intelligent fire surveillance system which is robust against the variation of the flame color, especially at night. The proposed system extracts the moving object from the input image, makes a decision whether the object is the flame or not by means of the color obtained by fuzzy color model and the shape obtained by histogram, and issues a fire alarm when the flame is spread. Finally, we verify the efficiency of the proposed system through the experiment of the controlled real fire.