• Transactions of the Korean hydrogen and new energy society
• /
• v.14 no.1
• /
• pp.46-52
• /
• 2003

유황 양 전극과 액체 전해질, 리튬 금속을 음극으로 사용한 리튬 유황 전지를 제조하여 그 특성을 조사하였다. 유황 전극은 유황파우더와 carbon black 을 도전재로, 그리고 바인더로 PVdF를 사용하여 제조하였다. 이렇게 제조된 셀은 두개의 다른 전압 구간에서 충방전 실험을 행하였다. 첫 번째 셀은 $S_8+{\chi}Li{\leftrightarrow}Li_2S_x(X=4{\sim}12)$ 반응만을 일어나 게 하기 위하여 2.1V 와 2.5V 사이에서, 그리고 두 번째 셀은 $Li_2S_x+{\chi}Li{\leftrightarrow}Li_2S(x=2{\sim}4)$의 반응만을 일어나게 하기 위하여 1.5V 와 2.5V 에서 충방전 하였다. 그 결과 첫 번째 셀이 더 좋은 싸이클 특성을 가지는 것을 확인 탈 수 있었다. 각 전압구간에서 각 셀이 충방전 되는 동안, 전해질 내로 녹아난 유황의 양은 큰 차치가 없는 것을 확인하였다. 그리고, 전압에 따른 전극의 임피던스를 측정한 결과, 방전이 끝난 후 큰 저항성분이 새로 생긴 것을 확인 할 수 있었다. 이는 사이클이 진행된 후의 전극표면을 SEM 분석을 행한 결과로부터 사이클이 진행된 후 전극 표면에 최종 반응 산물인 $Li_2S$ 가 피막형태로 형성된것을 확인 할 수 있었다.

• 한국전기화학회:학술대회논문집
• /
• 1999.04a
• /
• pp.73-73
• /
• 1999

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.3
• /
• pp.317-323
• /
• 2006

Electric conductive material should be homogeneously mixed with sulfur in sulfur electrode fabrication of lithium/sulfur battery, because sulfur is electric insulator. In this paper electrochemical properties of Li/S battery was studied with various compositions of sulfur electrodes. When content of sulfur changed from 40 wt.% to 80 wt.%, the 60 wt.% sulfur electrode showed the maximum capacity of 1489 mAh/g-sulfur. Electrochemical properties of Li/S battery using 60 wt.% sulfur was also investigated with various carbon contents. The discharge capacity changed as a function of carbon contents. The optimum composition was 25 wt.% carbon for 60 wt.% sulfur electrode.

• 한국전기화학회:학술대회논문집
• /
• 2004.04a
• /
• pp.13-13
• /
• 2004

• 한국전기화학회:학술대회논문집
• /
• 1999.04a
• /
• pp.72-72
• /
• 1999

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.1
• /
• pp.83-91
• /
• 2011

We investigated the effect of composition of a sulfur electrode with MWNT on the discharge behavior and cycling property of a Li/S cell. The MWNT content of a 60wt.% sulfur electrode varied from 10 wt.% to 30 wt.%. The optimum content of MWNT is 20wt.%, which shows the best cycling property. The first discharge capacity is 1166 mAh/g and decrease to the 542 mAh/g after 30th cycle. The homogeneous distribution of MWNT is an important factor for cycling properties.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.142-142
• /
• 2007

• Clean Technology
• /
• v.20 no.1
• /
• pp.88-94
• /
• 2014

During the past decades much attention has been paid to the desulfurization of diesel oil which is important as a source for the fuel cells to prevent the sulfur poisoning of both diesel steam reforming catalyst and electrode of fuel cell. Although alternative desulfurization techniques have been investigated, desulfurization for ultra-low sulfur diesel (ULSD) is still challenged. Therefore, this research focuses on the desulfurization of commercial ULSD for the application to molten carbonate fuel cell (MCFC). Herein, the performances of several kinds of commercial adsorbents based on activated carbons, zeolites, and metal oxides for desulfurization of ULSD were screened. The results showed that metal oxides based materials can feasibly reduce sulfur concentration in ULSD to a level of 0.1 ppmw while activated carbons and zeolites did not reach this level at current conditions.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.6
• /
• pp.753-763
• /
• 2016

High temperature sodium/sulfur battery(Na/S battery) has good electrochemical properties, but, the battery has some problems such as explosion and corrosion at al. because of using the liquid electrodes at high temperature and production of high corrosion. Room temperature sodium/sulfur batteries (NAS batteries) is developed to resolve of the battery problem. To recently, room temperature sodium/sulfur batteries has higher discharge capacity than its of lithium ion battery, however, cycle life of the battery is shorter. Because, the sulfur electrode and electrolyte have some problem such as polysulfide resolution in electrolyte and reaction of anode material and polysulfide. Cycle life of the battery is improved by decrease of polysulfide resolution in electrolyte and block of reaction between anode material and polysulfide. If room temperature sodium/sulfur batteries (NAS batteries) with low cost and high capacity improves cycle life, the batteries will be commercialized batteries for electric storage, electric vehicle, and mobile electric items.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.174-179
• /
• 2011

We investigated the surface morphology changes of a lithium/sulfur battery using multi-walled canbon nanotube added sulfur electrode during charge-discharge cycling. The Li/S cell showed the first discharge capacity of 1286 mAh/g-S, which utilized is 71% of the theoretical value. It decreased to 328 mAh/g-S at the 100th cycle, which corresponds to about 19% utilization of the total sulfur in the cathode. The spherical lumps of the reaction product were observed on the surface of the sulfur electrode. This material was verified as lithium sulfide by X-ray diffraction measurement. The pores in the separator were filled with reaction product. Thus the diffusion of the $Li^+$ ion decreased, which resulted in the decreased capacity of the Li/S cell.