• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.225-230
• /
• 1988

Emulsion stability, viscosity, and oil particle size of mayonnaise, prepared at various egg yolk contents, were investigated. With increasing of the egg yolk ratio, emulsion stability became stronger, viscosity became higher, and oil particle size became smaller. Freezing stability of mayonnaise containing below 6.5% egg yolk was reduced significantly. Referring to vibration separation, it was observed that stability of mayonnaise containing 2% and 3.5% egg yolk was very low and containing over 5% egg yolk was stable relatively. Viscosity of mayonnaise, stored at $-10^{\circ}C$, was reduced significantly during first 24hrs. and then levelled off. Oil particle size of mayonnaise, stored at $-10^{\circ}C$, became larger with increasing the storage time and the tendency to change was apparent in the sample containing below 6.5% egg yolk.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1434-1438
• /
• 2006

The purpose of this study was to make soy milk without using any food additives. First, it was attempted to find the effects of homogenizing pressure on the emulsion stability of soy milk without addition of monoglyceride. The soy milk was made with the ratio of bean and water as 1:8, and the yields of soy milk was measured to be 5.87 fold of the beans used. lifter making soy milk by differentiated pressure of the homogenizer at $50kg/cm^2,\;100kg/cm^2,\;150kg/cm^2\;and\;200kg/cm^2$, general composition of the center part of soy milk was analysed. The analysis results indicated that the lipid content increased by the increase of the emulsion pressure. Moreover, the suspension stability, emulsion stability and viscosity also increased by the increase of the emulsion pressure. Therefore, we thought that the production of soy milk without adding any emulsifier was possible only by homogenizing at higher pressure over $150kg/cm^2$.

• Korean Journal of Microbiology
• /
• v.34 no.3
• /
• pp.162-168
• /
• 1998

The characteristics of demulsification of petroleum emulsion by Streptomyces sp. 8321 were investigated. Demulsification ability of Streptomyces sp. 8321 appeared to be confined within the spores. Spore surface hydrophobicity was increased with culture age stimulating the demulsification ability. Over $1.1{\times}10^8spores/ml$ completely demulsified kerosene-0.2% Triton X-100 (2:1) emulsion. Among the low viscosity hydrocarbons, hydrocarbons with longer chain such as n-hexadecane and diesel were more rapidly demulsified. However, only 20-30% of the emulsion with high viscosity hydrocarbons was demulsified after 24 hours. Oil-in-water emulsions made by Corexit, Finalsol and BP series surfactants were completely demulsified within one minute. Demulsification rate ($t_{1/2}$) of oil-in-water emulsions made by Corexit 7664, 8667, Triton X-100 and Tween 80 decreased as their concentration increased. In case of water-in-oil emulsion made by Seagreen, $t_{1/2}$ was over 24 hours. Therefore, demulsification ability of Streptomyces sp. 8321 was more effective on oil-in-water emulsions.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.2
• /
• pp.119-131
• /
• 2012

The W/O emulsion is widely used for cosmetics because of its water-proofing benefit and long-lasting moisturizing effect. However, because of low stability of the W/O emulsion, it is very important to control the concentration of electrolyte and emulsifying agent, and ratio of water phase. Among these factors, we focused on the effects of different structures of emulsifying agents on the change of stability. Emulsifying agents were sorted into polyglyceryl ester, silicone and sugar series. We also examined the emulsifyingability of emulsifier by changing the ratio of normal and silicon oil in the oil phase. Through these experimental results, we figured out the property of w/o emulsion depending on the types of emulsifiers, and observed the stability of emulsion considering the change of particles and viscosity over time.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.404-410
• /
• 2020

In this study, the stability criteria of cosmeceuticals emulsion containing Flos Sophorae Immaturus extracts was established using the Box-Behnken design model (BBD-RSM). As optimization conditions of the emulsification using the BBD-RSM, the amount of surfactant and additive, and emulsification time and speed were used as quantitative factors while mean droplet size (MDS), viscosity and emulsion stability index (ESI) were used as reaction values. According to the result of BBD-RSM, optimum conditions for the emulsification were as follows; the emulsification time and speed of 17.8 min and 5505 rpm, respectively and amounts of the emulsifier and additive of 2.28 and 1.05 wt.%, respectively. Under these conditions, the MDS, viscosity, and ESI after 7 days from the reaction were estimated as 1875.5 nm, 1789.7 cP, and 93.8%, respectively. The average error value from our actual experiments for verifying the conclusions was below 5%, which is mainly due to the fact that the BBD-RSM was applied to the optimized cosmeceuticals emulsification.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.1176-1182
• /
• 2021

In this study, the emulsion stability of henna, a natural hair dye, according to the content of cetyl alcohol, one of the emulsification stabilizers, was analyzed, and the content of cetyl alcohol showing the most stable emulsification was confirmed. To analyze the emulsion stability, differences in particle size, particle shape, viscosity, and color after dyeing were compared according to the content of cetyl alcohol. As a result of dynamic light scattering (DLS) zeta analysis, cetyl alcohol 3% showed the highest zeta potential value of 115.9 mV, and the particle size distribution was henna in which a cream-type hair dye containing 3% cetyl alcohol was dispersed in distilled water. The width of the particle size distribution was narrow compared to. As a result of viscometer analysis, the viscosity increased as the content of cetyl alcohol increased. As a result of measuring the henna pH of the cream formulation, it was measured in a pH range suitable for the scalp. As a result, emulsion stability increases as the content of cetyl alcohol increases in henna cream formulations for hair dye.

• Journal of Conservation Science
• /
• v.33 no.2
• /
• pp.85-95
• /
• 2017

Oil paints are mixtures of pigments, drying oils and additives. In the past, oil paints were mainly composed of inorganic pigments. However, recently color matching techniques vary depending on manufacturers due to the development of various kinds of synthetic pigments. Despite this, most studies of oil paints in South Korea are about durability tests, and there is no comparative study on the characteristics of commercial oil paint components. This study aims to compare the properties of four different kinds of oil paints from four manufacturers, which are the most popularity used. Extender pigments in oil paint from C brand differed from that of other manufacturers and various kinds of coloring pigments were differently used depending on the oil paints and the manufacturers. The mixing ratios and the pigment types differed even for oil paints having the same product name. It is assumed that these differences could affect the colors. The result of this study is expected to contribute to the analysis of artworks through the accumulation of scientific data of oil paints. In addition, it can be utilized as a scientific basis for art history studies, including the characteristics of artists or production year.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.1
• /
• pp.55-68
• /
• 1999

A muti-lamellar emulsion containing a pseudoceramide, N-Ethanol-2-myristyl/ palmityl-3-oxostearmide/arachidamide(PC-9) has been prepared and its efficacy evaluation has been investigated. In order to prepare a muti-lamellar emulsion, first, the gram ratios of PC-9, fatty acid and cholesterol on the phase diagram to be capable of forming their lamellar liquid crystal structures were determined and secondly, the multi-lamellar emulsion was preprared using glyceryl monostearate and polyoxyethylene glyceryl monosteartate as emulsifers together with above mentioned pseudo-stratum corneum lipid components. Besides natural oils such as olive oil had a tendency to build up the multi-lamellar emulsion. And according as the amount of oil increased in the emulsion, it was observed that the optical anisotropy of “Maltese Cross” which was a typical configuration of multi-lamella mesophase texture diminished. In the dried state of the multi-lamella emulsion, it was examined to transform its emulsion phase into a lamella liquid crystal one. And finally, when the emulsion was applied into a human skin, it was investigated that it had effectiveness in reducing transepidermal water loss (TEWL) of the skin.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.320-325
• /
• 2021

In this study, an optimization for the production of water emulsion was designed by adding an extract of wheat sprout, which is known to contain a large amount of antioxidants. The central composite design of reaction surface analysis method (CCD-RSM) was used for the optimization process. The amount of emulsifier, emulsification time, and added amount of wheat sprout extract were selected as independent variables based on our preliminary experiments. The mean droplet size (MDS), viscosity, and emulsion stability index (ESI) were set as the responses to evaluate the stability of the emulsion. For each independent variable, the P-value and coefficient of determination were evaluated to verify the reliability of the experiments. From the result of CCD-RSM, optimum conditions for the emulsification were determined as 23.6 min, 7.7 wt.%, and 3.9 wt.% for the emulsification time, amount of emulsifier, and amount of sprout, respectively. From the optimized condition obtained, MDS, viscosity, and ESI after 7 days from reaction were estimated as 252.3 nm, 616.7 cP, and 88.7%, respectively. The overall satisfaction was 0.9137, which supported the validity of the experiments, and the error rate was measured at 0.5% or less by advancing the experiments. Therefore, an optimized process for producing an emulsion by adding the malt extract was designed by the CCD-RSM.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.319-321
• /
• 2005

음이온계와 양이온계의 계면활성제를 사용하여 천연세정성분인 리모넨의 유화특성을 고찰한 결과 두 계열 모두 만족할 만한 결과를 나타내지 못하였고, 교반속도는 1500 rpm이상에서는 영향이 거의 없었으며, 유화온도는 상온에서도 가능할 것으로 판단된다. 유사한 구조와 물성을 가지는 리모넨과 ${\sigma}$-피넨을 비교한 결과 리모넨이 우수한 것으로 나타났으며 무독성인 IPA를 첨가한 경우가 첨가하지 않은 것보다 양호한 결과를 얻었다.