• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.543-563
• /
• 1999

For hazardous air pollutants(HAP) such as NO and $NO_2$ decomposition efficiency, power consumption, and applied voltage were investigated by SPCP(surface induced discharge plasma chemical processing) reactor to obtain optimum process variables and maximum decomposition efficiencies. Decomposition efficiency of HAP with various electric frequencies(5~50 kHz), flow rates(100~1,000 mL/min) initial concentrations(100~1,000 ppm), electrode materials(W, Cu, Al), electrode thickness(1, 2, 3 mm) and number of electrode windings(7, 9, 11) were measured. Experimental results showed that for the frequency of 10 kHz, the highest decomposition efficiency of 94.3% for NO and 84.7% for $NO_2$ were observed at the poser consumptions of 19.8 and 29W respectively and that decomposition efficiency decreased with increasing frequency above 20 kHz. Decomposition efficiency was increased with increasing residence times and with decreasing initial concentration of pollutants. Decomposition efficiency was increased with increasing thickness of discharge electrode and the highest decomposition efficiency was obtained for the electrode diameter of 3mm in this experiment. As the electrode material, decomposition efficiency was in order : tungsten(W), copper(Cu), aluminum(Al).

• Korean Journal of Food Science and Technology
• /
• v.46 no.3
• /
• pp.283-287
• /
• 2014

This study determined the hazardous heavy metal content of mushrooms from markets in Seoul, Korea. One hundred and fifty mushroom samples were digested by the microwave method then the hazardous heavy metal (Pb, Cd, As, Cr, Ni and Hg) content was determined by the inductively coupled plasma-mass spectrometry (ICP-MS) and mercury analyzer. The average values of heavy metals in the samples were as follows: (mean [minimum-maximum], ${\mu}g/kg$); Pb 7.8 (1.9-30.0), Cd 45.3 (0.7-292.4), As 54.6 (24.2-229.3), Cr 42.6 (8.4-334.3), Ni 22.4 (up to 180.4), and Hg 8.9 (2.0-25.0). The contents of hazardous heavy metal in mushrooms were lower than those reported previously and also lower than the Provisional Tolerable Weekly Intake (PTWI) limit prescribed by the FAO/WHO. Thus, it could be suggested that the hazardous heavy metals levels in the mushrooms of retail market were adequately safe for consumption.

• Journal of Food Hygiene and Safety
• /
• v.37 no.3
• /
• pp.129-135
• /
• 2022

The official analytical method for the analysis of harmful heavy metals in Meju, distributed in Korea, employs a strong acid to decompose the organic components. This analysis is time consuming and harmful to the users and/or the environment. This study aimed to develop a new pre-treatment technology using laser ablation, to rapidly analyze harmful heavy metals without using strong acids. The results obtained from this method were validated by the National Institute of Food and Drug Safety Evaluation guideline (NIFDS, 2016). Moreover, a comparison of the two methods showed that the analytical time for 55 Meju samples was shortened by 96% or more in the new method. The results showed no significant difference in the recovery ranging from 90-120%. The proposed method proved suitable for detecting harmful heavy metals in Meju.

• Analytical Science and Technology
• /
• v.22 no.1
• /
• pp.109-117
• /
• 2009

The following concentrations of some PAHs were investigated; [benzo(a)anthracene, chrysene, benzo (b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g, h, i)perylene, indeno (1,2,3-c,d)pyrene] in fish(n=168) and shellfish(n=40). The methodology involved saponification and extraction with n-hexane, clean-up on Sep-Pak Florisil Cartridges and determination by HPLC/FLD (High Performance Liquid Chromatograph/Fluorescence Detector). Overall method recoveries for 8 PAHs spiked into these products ranged from 88 to 112%. The mean level of benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k) fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene and indeno(1,2,3-c,d)pyrene in cooked fish was ND, ND, 0.0009, ND, 0.01, ND, ND, ND and in cooked shellfish was 1.84, 3.51, 0.81, 0.38, 0.39, 0.04, 0.20, ND, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.61-69
• /
• 1987

In water treatment, prechlorination is often carried out to solve the troubles caused by Algae, but produces by-products that are known to be harmfull to human health. In this study, chlorine and chlorine dioxide used for algae removal process were compared in producing trihalomethanes and haloacetonitriles to study the possibilities in using chlorine dioxide as a alternative for chlorine. The raw water used for the study had 10,790 algae cells per one milliliter and Ankistrodesmus sp. were the most common.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.355-359
• /
• 2006

토양에 누적된 오염물질은 지하수 유동과 연계하여 점차 주변지역으로 확산된다. 본 조사는 오염의 개연성이 높은 산업단지를 선정하고 그 중에서도 유해화학물질의 사용이 많은 지역을 대상으로 토양과 지하수의 오염도조사를 수행하였다. 토양오염도 조사는 160개 지점에서 토양시료를 채취하여 오염물질을 분석하였으며 분석결과 TPH물질은 최고 23,151mg/kg, BTEX는 최고 1,657mg/kg로 검출되었다. 오염특성은 유류(TPH, BTEX) 물질 이외에도 TCE, PCE◎물질과같은 염소계 유기용제에 의한 오염도 확인할 수 있었으나 중금속 물질에 의한 오염은 우수 방류구와 같은 일부 지역에서 검출되었다. 지하수 수질의 경우 페놀, 비소, 납, BTEX, TCE, PCE 물질들이 복합적으로 오염되어있는 것으로 나타났다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.318-323
• /
• 2011

대규모 화재실험 또는 실제 화재에서 발생되는 독성가스의 분석은 화재가스에 대한 샘플링, 시료전처리, 분석데이터 처리 등의 여러 가지 문제로 인해 측정이 불가능하였다. 본 논문에서는 개방형 FT-IR 장비를 활용하여 대공간에서 발생되는 유해가스를 직접적인 접촉 없이 원거리에서 검출하는 실험적 연구를 수행하여 측정 가능성을 입증하였다.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.2
• /
• pp.109-115
• /
• 1999

Lead and cadmium were analyzed with different pretreatemnt methods. Paddy soil and wastewater sludge samples were used and the result was compared each other. Pretreatment method affected the concentration obtained from samples significantly. Large difference was illustrated between the results. The concentration by 0.1N HCl extraction method, an official analytical method for soil and solid wastes, was far lower than those by the EPA3050B and mixed-acid digestion methods. The reason might be that metals associated with organics and silicates are not easily extracted by 0.1N HCl, while digestion methods using strong acids and high temperature dissolved all the elements in the samples. It implies that pretreatment method should be specified in addition to concentration on the report of metal analysis for environmental samples. Acid digestion methods are not necessarily good because the concentration obtained does not represent the natural condition which is our concern in many cases. The 0.1N HCl extraction method does not fully represent the natural condition either. The metals associated with organics will be extracted eventually as organics decompose with time. Therefore, proper pretreatment and analytical methods should be developed for specific purpose, and their standardization is recommended.

• Analytical Science and Technology
• /
• v.17 no.5
• /
• pp.410-415
• /
• 2004

In order to learn the emission characteristics of hazardous pollutants associated with environmental tobacco smoking (ETS), we measured the concentrations of major aromatic VOC and carbonyl compounds released from ETS. By acquiring the different smoke types of ETS, we were able to determine that the concentrations of those species range from ppb (normal exhaled air of smoker prior to smoking) to ppm levels (direct release of ETS without filter). Using these measurement data, we also evaluated the body-retaining rate of these compounds as the result of ETS. The results of our analysis indicated that predominant portion of them (e.g., > 99%) are retained as the result of cigarette smoking. To learn more about the potential impact of ETS, more extensive study may be required to assess the gross picture of pollutant deposition inside respiratory intake and their health-effects.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.3
• /
• pp.123-131
• /
• 2019

In this study, the development of transparent UV blocking material using $TiO_{2-x}$ oxide thin film process was developed. A process technology is related to a process technology for making a sample with ultraviolet-shielding property of visible light transmittance of 78 % or more (total light transmittance at 550 nm) and of a UV cut-off characteristic of more than 95 % at 315 nm in ultraviolet wavelength band. In this study, it is possible to establish a flexible device process condition of high performance ultraviolet (UV) shielding thin film, to design mixed type of transparent flexible device with heterogeneous characteristics and to formulate composite deposition technology, according to various market demands. Establishment of actual roll-to-roll continuous process and equipment and process technology will affect related industries greatly.