• Journal of the KSME
• /
• v.33 no.9
• /
• pp.793-802
• /
• 1993

이 글에서는 부 온도저항계수를 갖는 탄소파이버를 열선으로 이용하고 이를 구동한는 증폭회로의 구성에 관한 연구, 3차원 속도측정용 열선프로브의 접지단자를 3개의 열선이 공통으로 사용하는 공통접지 삼축 열선프로브와 유속계의 특성에 대해 고찰한다. 또한 과열비가 다른 두 개의 저 온도형 열선 유속계를 이용하여 유동장의 온도와 속도를 동시에 측정한는 방법과 임의 형태의 유체온도정보를 이용한 열선유속계의 일반적인 온도보상방법에 관하여 논의하여 열선유속계의 원리와 그 응용 등을 간단히 설명함으로써 관심 있는 분들의 이해를 돕고자 한다.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.16.1-16.1
• /
• 2005

• Journal of Korea Ship Safrty Technology Authority
• /
• v.6
• /
• pp.29-39
• /
• 2001

본 논문에서는 차세대 고속선에 적합한 선형의 하나로 거론되고 있는 삼동선의 개발 현황을 살펴보고, 실선으로의 가능성을 파악하기 위하여 적용 대상선을 2,500톤급 삼동형 함정으로 설정하여 개념설계를 수행한 결과를 보이고자 한다. 함정의 설계조건과 요구사항에 적합하도록 삼동선의 장점을 최대한 반영하여 초기 개념 설계를 수행하였으며, 이로부터 도출된 삼동선형의 유체역학적인 성능검토를 위해 저항추진, 내항 및 조종성능에 대한 연구를 수행하고 그 결과를 유사 단동선과 비교, 검토하였다. 연구결과의 가시화를 위하여 최종적으로 3차원 컴퓨터 그래픽 모델링하고, 실선의 1/100 축적모형을 제작하여 설계결과를 표현하였다.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.44-50
• /
• 2010

This study is devoted to understand the basic characteristics of the flowfield around a train in evacuated tube and to suggest an efficient numerical method to calculate the flowfield. To get steady-state solution in minimum calculation domain, various boundary condition have been tried for steady calculation and have been compared to the solution of unsteady calculation. At the train velocity of 300km/h, the aerodynamic drag results of both calculation method agreed very well. The drag ratio between on the open filed and in the tube from the calculation result by the suggested numerical method lied in the same fitting curve with that from the filed test of high-speed trains running in the line.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.3
• /
• pp.219-226
• /
• 2012

Columns are the key elements supporting load in structure. Column failure causes the structure to collapse. It is important to evaluate residual strength for damaged columns under blast load for preventing progressive collapse. In this paper, columns were investigated to compare the blast resistance on the change of the number of steel bars within the range of reinforcement ratio. And this study was carried out 4 different analytical models to evaluate effects of aspect ratio. The results indicate that the vertical strain was unaffected by the number of steel bars and aspect ratio. As the number of steel bars facing blast load increase, the blast resisting capacity of the columns was improved in the lateral strain. Also, the analysis results showed that a large moment of inertia of area, as compared to a small one would be superior in residual strength as well as force of restitution.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1070-1077
• /
• 2022

The International Maritime Organization has recently strengthened its marine environment regulations. The energy efficiency index has long been an important indicator of ship design, and now, energy efficiency is being enforced for existing ships as well as new ships. To increase the energy efficiency of existing ships, methods such as retrofitting the bow bulb, selecting an optimized trim during ship operation, and installing an energy saving device have been applied. In this study, the ship resistance was numerically simulated using computational fluid dynamics (CFD) under various bow and stern trim conditions. In addition, the bulb was redesigned to further improve the resistance performance under the selected trim conditions. When the improved bulb was applied, the effective horse power increased by approximately 5%. It is, however, necessary to verify whether the redesigned bulb can reduce ship resistance in waves.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.583-590
• /
• 2018

The objective of this study is to present a resistance performance map developed using the dimension parameters of a bilge keel appendage attached to a fishing vessel using CFD. The dimension parameters consist of three length and breadth measures of a bilge keel appendage from nine selected cases. The size of a bilge keel attached to an existing ship should be 90 % of the ship length and 5 % of the ship breadth. In this study, bilge keels with a length of 63 %, 77 % and 90 % and a breadth of 5 %, 7 % and 9 % were considered based on ship length and breadth. The effective power in each of the nine cases was predicted using CFD. Based on results from an existing ship, effective power in the case with the shortest length and longest breath was reduced by 0.3 %. The case with the longest length and breadth showed an increase in effective power of 1.7 %. The case with the shortest length and breadth showed a decrease in effective power of 2.3 %. The proposed map can be utilized to select dimensions according to the sailing and work patterns of fishing vessels from the perspective of resistance performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.475-479
• /
• 2012

We present a novel polymer fabrication process involving direct UV patterning of a hyperbranched polymer, AEO3000. Compared to PDMS, which is the most widely used polymer in bioMEMS devices, the present polymer has advantages with regard to electrode integration and fast fabrication. We designed a four-chip microelectrofluidic bench having three electrical pads and two fluidic I/O ports. We integrated a microfluidic mixer and a cell separator on the bench to characterize the interconnection performance and sample manipulation. Electrical and fluidic characterization of the microfluidic bench was performed. The measured electrical contact resistance was $0.75{\pm}0.44{\Omega}$, which is small enough for electrical applications, and the pressure drop was 8.3 kPa, which was 39.3% of the value in the tubing method. By performing yeast mixing and a separation test in the integrated module on the bench, we successfully showed that the interconnected chips could be used for bio-sample manipulation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.6
• /
• pp.532-539
• /
• 2008

Kwon et al.(2008) carried out a hydraulic experiment in order to evaluate Manning coefficient, which implicates flow resistance due to bottom friction as well as drag caused by the squared piers higher than water depth and arranged with equal intervals, under the flow condition with a constant drag coefficient, $Re>10^4$. And, based on the equation of equilibrium, they proposed a formula for the equivalent resistant coefficient including empirical drag interaction coefficient obtained by using the experimental results. In this study, the hydraulic experiment was simulated using FLOW-3D, a 3-dimensional computational fluid dynamic code. The computations were compared with the experiment results as well as the semi-theoretical formula, and the comparisons show a good agreement. From the agreement, it was confirmed that when flow resistance bodies were higher than water depth, Manning n value increases with 2/3 power of water depth as shown in the theoretical formula and that drag interaction coefficient was dominated by their intervals.

• Journal of Biosystems Engineering
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2008

The output of the Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide basic data for the design of regenerator matrix, characteristics of flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, two different wire screens were used. The results are summarized as follows; 1. With the wire screen of No. 50 as regenerator matrices, pressure drop of working fluid of the oscillating flow is shown as 3 times higher than that of one directional flow, not too much influenced by the number of packed meshes. 2. With the wire screen of No. 100 as regenerator matrices, pressure drop of working fluid of the oscillating flow is shown as 2.5 times on the average higher than that of one directional flow, not too much influenced by the number of packed meshes. 3. Under one directional flow which used regenerator matrices with both 200, 240, and 280 wire screens of No. 50 and 320, 370, and 420 wire screens of No. 100, the relationship between the friction factor and Reynold No. is shown as the following formula. $$f=\frac{0.00326639}{Re\iota}-1.29106{\times}10^{-4}$$ 4. Under oscillating flow which used regenerator matrices with both 200, 240, and 280 wire screens of No. 50 and 320, 370, and 420 wire screens of No. 100, the relationship between the friction factor and Reynold No. is shown as the following formula. $$f_r=\frac{0.000918567}{Re\iota}+1.86101{\times}10^{-5}$$ 5. The pressure drop is shown as high in proportion as the number of meshes has been higher, and the number of packed wire screens as matrices increases.