• 전기학회논문지P
• /
• 제61권4호
• /
• pp.225-227
• /
• 2012

This paper presents a chemical etching system for groove manufacturing for the fluid and aero dynamic bearings. To manufacture the grooves to thrust and journal surface of the fluid and aero dynamic bearing, it is very important for grooves' depth to be smaller tolerance. It is very difficult for the internal surface of journal bearing to make the grooves precise. If the precision of the groove is not exact, we can not get the desirable performance for the target of the dynamic bearing. To make the groove of bearing precise, we propose the method of chemical etching system. It has known that the method of chemical etching can not make the groove on the internal surface of journal bearing excepts for on the surface of thrust bearing. However, this paper has shown the solution to make the grooves on it. We obtain the condition and the parameters of the system such as time, chemical material composition and so on. In this paper, we get the experimental results to verify the precise groove manufacturing for the fluid and aero dynamic bearing.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.324-329
• /
• 2005

This research investigates the electromechanical characteristics of a spindle motor in a free-falling mobile hard disk drive before unexpected shock. Electromechanical simulation includes a time-stepping finite element analysis of the magnetic field in a speed controlled brushless DC motor and dynamic analysis of the stationary and rotating part linked by fluid dynamic bearing under the free-failing condition. Analysis results show that the dynamic characteristics of the rotating spindle system during free-falling state have an effect on the relative motion between the stationary and rotating part of HDD. It results from the variation of reaction force in the bearing area due to the gravely force exerted on the rotating part of HDD, and the free-failing condition can be detected by observing the signal of the spindle motor and disk-head interface without using the accelerometer.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.330-336
• /
• 2005

This paper presents a method to analyze the vibration of a flexible spinning disk-spindle system with FDBs, flexible base structure and an actuator in a HDD by using the FEM. Finite element equations of each component of a HDD spindle system from the spinning flexible disk to the flexible base plate are consistently derived by satisfying the geometric compatibility in the internal boundary between each component. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by using the restarted Arnoldi iteration method. The validity of the proposed method is verified by comparing the simulated natural frequencies, mode shapes with the experimental results.

• 대한기계학회논문집B
• /
• 제34권6호
• /
• pp.649-654
• /
• 2010

DUP (direct underside pressurization)-장치와 프로펠러가 있는 3 차원 형상의 위그선(WIG-craft) 주위의 유동특성을 수치적으로 해석하였다. 이를 통하여 위그선 주위의 공기역학 관점의 힘들과 모멘트에 대해 고찰하였다. 이 연구의 해석에 사용된 모델은 프로펠러, 동체, 날개와 동체아래의 압력실 (air chamber)을 포함한 전 영역에 대하여 수행하였다. DUP 장치는 추력의 일부를 동체 아래의 압력실에 정체시킴으로 이륙 시와 같이 낮은 속도에도 효과적으로 양력을 증가시켜 이륙 속도를 줄이는 장치이다. 이러한 DUP 장치는 동압의 증가로 인하여 항력이 증가하고 공기의 회전성분으로 인하여 추가적인 모멘트를 생성하게 된다. 위그선의 비대칭 유동에 의해 발생하는 요잉 및 롤링 모멘트가 위그선의 안정성에 미치는 영향은 매우 미미하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.660-665
• /
• 2006

This paper presents a finite element method to analyze the free and forced vibration of a hard disk drive (HDD) considering the flexibility of a spinning disk-spindle with fluid dynamic bearings (FDBs), an actuator with pivot bearings, an air bearing between head-disk interface and the base with complicated geometry. Finite element equation of each component is consistently derived with the satisfaction of the geometric compatibility of the internal boundary between each component. The spinning disk, hub and FDBs are modeled by annular sector elements, beam elements and stiffness and damping elements, respectively. The actuator am, E-block, suspension and base plate are modeled by tetrahedral elements. The pivot bearing in the actuator and the air bearing between head-disk interfaces are modeled by the stiffness element with five degrees of freedom and the axial stiffness, respectively. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by solving the associated eigenvalue problem with the restarted Arnoldi iteration method. Modal and shock testing are performed to show that the proposed method well predicts the vibration characteristics of a HDD.

• 해양환경안전학회지
• /
• 제26권6호
• /
• pp.742-750
• /
• 2020

선체 부가물에서 발생하는 유동소음은 자체소음 관점에서 소나의 성능과 직결되고, 추진기 및 방향타와 상호작용을 통해 2차 소음원을 야기해 근접장 범위의 엄밀한 분석이 요구된다. 하지만 유동소음 해석에 적용되는 기존의 음향상사법은 음향 신호의 전파를 직접 모사하지 않는 간접법에 해당해 회절, 반사, 산란 특성을 고려할 수 없으며, 근접장 해석이 제한적이다. 본 연구에서는 격자 볼츠만 기법을 적용해 수중환경 유동소음의 전파과정을 직접 모사하였다. 격자 볼츠만 기법은 분자의 충돌과 흐름 과정을 통해 유동소음을 해석하는 기법으로, 압축성과 낮은 소산율, 낮은 분산율의 특성을 가지고 있어 소음해석에 적합하다. 선체 부가물 형상을 대상으로 RANS 해석을 통해 유동소음원을 도출하고, 유동-음향 경계면을 적용한 격자 볼츠만 기법으로 유동소음의 전파과정을 직접적으로 모사했다. 도출된 결과를 수음점의 위치에 따라 FW-H 결과 및 유체동압력 결과와 비교를 통해 근접장에서 타 기법 대비 격자 볼츠만 기법의 유용성을 확인했다.