• The KIPS Transactions:PartD
• /
• v.9D no.1
• /
• pp.91-102
• /
• 2002

We need a component-based system to reflect software changes in user's requirements, to implement a system at a rapid speed as well as to efficiently manage the system in a maintenance phase and to easily change software. Moreover, the component-based system has a merit in development cost. However, existing component development methodology for implement of component-based system is inefficient in object identification for component identification. Moreover, the existing component development methodology also fails to provide any method to identify system component. It merely provides procedures and methods to identify business component focused on a whole system domain. In addition, it has another problem that it considerably relies on developer's experiences and intuitions for component identification. Therefore, according to this paper, RUP (Rational Unified Process) is applied from a requirement analysis phase to an object identification phase in order to improve the inefficiency of object identification. In addition, this paper procedures and methods for system component identification, and identifies business components based on the identified system component, rather than on the whole system domain. This paper also provides and applies cohesion metric and coupling metric so as to overcome the problem that component identification depends on developer's intuitions and experiences. Accordingly, the component identification method proposed in this paper, may identify components more effectively based on facility of object identification, functional reusability of components, traceability, and independence of components.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.2
• /
• pp.295-310
• /
• 2014

DCS (Distributed Control System), the main control system of power plants, is an automated system for enhancing operational efficiency by monitoring, tuning and real-time operation. DCS is becoming more intelligent and open systems as Information technology are evolving. In addition, there are a large amount of investment to enable proactive facility management, maintenance and risk management through the predictive diagnostics. However, new upcoming weaponized malware, such as Stuxnet designed for disrupting industrial control system(ICS), become new threat to the main control system of the power plant. Even though these systems are not connected with any other outside network. The main control systems used in the power plant usually have been used for more than 10 years. Also, this system requires the extremely high availability (rapid recovery and low failure frequency). Therefore, installing updates including security patches is not easy. Even more, in some cases, installing security updates can break the warranty by the vendor's policy. If DCS is exposed a potential vulnerability, serious concerns are to be expected. In this paper, we conduct the penetration test by using NESSUS, a general-purpose vulnerability scanner under the simulated environment configured with the Ovation version 1.5. From this result, we suggest a log analysis method to detect the security infringement and react the incident effectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.377-387
• /
• 2014

This study mainly treats a new type of the bracing friction damper system, which is able to minimize structural damage under earthquake loads. The slotted bolt holes are placed on the shear faying surfaces with an intention to dissipate considerable amount of friction energy. The superelastic shape memory alloy (SMA) wire strands are installed crossly between two plates for the purpose of enhancing recentering force that are able to reduce permanent deformation occurring at the friction damper system. The smart recentering friction damper system proposed in this study can be expected to reduce repair cost as compared to the conventional damper system because the proposed system mitigates the inter-story drift of the entire frame structure. The response mechanism of the proposed damper system is firstly investigated in this study, and then numerical analyses are performed on the component spring models calibrated to the experimental results. Based on the numerical analysis results, the seismic performance of the recentering friction damper system with respect to recentering capability and energy dissipation are investigated before suggesting optimal design methodology. Finally, nonlinear dynamic analyses are conducted by using the frame models designed with the proposed damper systems so as to verify superior performance to the existing damper systems.

• The KIPS Transactions:PartD
• /
• v.14D no.1 s.111
• /
• pp.121-130
• /
• 2007

in a software development, the design or architecture prior to implementing the software is essential for the success. This paper presents a case that we successfully designed a software architecture of radiation monitoring system (RMS) for HANARO research reactor currently operating in KAERI by applying the quality attribute-driven design method which is modified from the attribute-driven design (ADD) introduced by Bass[1]. The quality attribute-driven design method consists of following procedures: eliciting functionality and quality requirements of system as architecture drivers, selecting tactics to satisfy the drivers, determining architectures based on the tactics, and implementing and validating the architectures. The availability, maintainability, and interchangeability were elicited as duality requirements, hot-standby dual servers and weak-coupled modulization were selected as tactics, and client-server structure and object-oriented data processing structure were determined at architectures for the RMS. The architecture was implemented using Adroit which is a commercial off-the-shelf software tool and was validated based on performing the function-oriented testing. We found that the design method in this paper is an efficient method for a project which has constraints such as low budget and short period of development time. The architecture will be reused for the development of other RMS in KAERI. Further works are necessary to quantitatively evaluate the architecture.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.49-60
• /
• 2005

The Back Bone of gearing portion between Core Network System which is used in wire and wireless system is No.7 Protocol. ISUP( ISDN User Part), INAP handling in Intelligent Network and MAP gearing method for linking each Network Element System in mobile network have use of No.7 signaling. Therefore, it is require for system to detect the problem - operating problem occurs in Core Network which use No.7 signaling or the existing problem that is not recognized - in shortest time. This paper study out analyzing and measuring system for No.7 protocol and analyzing out system whether out of order or not. It can abstract No.7 Signaling Message and analyze system performance and report it. This system is connected in system No.7 HW Module which is in charge of No.7 Signaling. It is not offer Emulator function and Simulation function for any scenario but offer monitoring No.7 signaling. This system perform the function about No.7 MTP, ISUP, INAP and MAP and is offered several wire and wireless network Operator. It can detect and correct SW system, HW system and operating system problem. From now on, this system may offer the function about A-interface which is gearing between BSC and MSC, so it will perform to analyze generally and prompt effective operating for Core Network system.

• Information Systems Review
• /
• v.11 no.2
• /
• pp.1-22
• /
• 2009

IT advances rapidly and is widely used both in for-profit and non-profit organizations. Academic institutions are no exception in the adoption of new IT such as e-libraries, e-blackboards, as well as Web 2.0 services. However, administrative information systems in colleges and universities often lag relatively behind. One of the reasons of this is that academic institutions tend to focus only on the implementation of IT, while neglecting the mindfulness needed for post-implementation. This study develops a new perspective for the sustainability of academic information systems through the lens of mindfulness. The results from administrating a nation-wide survey of universities and colleges provide the variations of a ranking of the critical success factors between implementation and post-implementation. The findings imply that both individual and collective mindfulness are needed to implement and, especially, sustain administrative IS successfully in academic institutions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.2
• /
• pp.106-112
• /
• 2010

Due to the improvement and stabilization of the social environment, construction market in the urban region is under shrinking. According, researches to lengthen the service life of the existing building structures are under the way through the remodeling or maintenance of deteriorated structures other than the new constructions. Similar situations are widely discussed in the domestic building construction market and the social importance of the remodeling of the existing building structures is increased. Although the structural stability of the building is uncertain due to the frequent repairing and structural changing, the remodeling works are usually conducted. In general, documents such as drawings and calculations for the design of the deteriorated structure to be remodeled are not kept. Accident at the remodeling site frequently occur because of the lack of thorough understanding of changed situations such as loadings, loading paths, changing of the mechanical properties of material, etc. In this paper, using the finite element analysis method, we investigated the structural behaviors of slab in the remodeling building and the results are applied to remodeling construction, and the appropriateness of the remodeling works are evaluated.

• Journal of dental hygiene science
• /
• v.3 no.2
• /
• pp.77-82
• /
• 2003

The purpose of this study was to examine the characteristics of dental homepages in korea to discuss how they could be improved better. The findings of this study could be described as below : First, dental homepage should include differentiated, specialized content and features. Second, the use of three-dimensional image or multimedia would contribute to increasing people's understanding of dental treatment or general dental information and elevating the effectiveness of dental publicity activities. Third, the want ad and order system used by the business sector or hospital would serve to multiply the management efficiency of dental institutions. Fourth, dental hospitals and clinics that belong to the same network or franchise need to make publicity banner for feasible mutual link, and the use of the same homepage design or common logo would be effective for better image and publicity activities. Fifth, it would be convenient to add the map search function or inquiry system. Seventh, if multiple types of services, such as entertainment or game, are prepared, it would be possible for dental institutions to project a better image and to induce visitors to hit the sites again.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.80-85
• /
• 2015

In this paper, we present, an indstrial RFID layered microstrip patch antenna is designed using an inset feed method in order to improve recognition rates in a long distance as tags are attached to metal object by improving a problem of feeding power in fabricating metal tags and reducing effects of metallic object. The inset feed shows a distinctive characteristic that has no separation between emitters and feed lines differing from a structure with the conventional inductive coupling feed. This structure makes possible to produce a type that presents a low antenna height and enables impedance coupling for tag chips. Although it shows a difficulty in the impedance coupling due to increases in the parasite capacitance between a ground plane and an emitter in an antenna according to decreases in the height of a tag antenna, it may become a merit in designing the tag antenna because the antenna impedance can be determined as an inductive manner if a shorted structure is used for feeding power. Therefore, in this paper the microstrip patch antenna is designed as a modified type and applies the inset feed in order to reduce effects of metallic objects where the antenna is be attached. Also, the antenna uses a multi-layer structure that includes a metal plate between radiator and ground instead of using a single layer.

• The KIPS Transactions:PartD
• /
• v.8D no.1
• /
• pp.71-80
• /
• 2001

Object-Oriented (OO) methodology to use the concept like encapsulation, inheritance, polymorphism, and message passing demands metrics that are different from structured methodology. There are many studies for OO software metrics such as program complexity or design metrics. But the metrics for the analysis class need to decrease the complexity in the analysis phase so that greatly reduce the effort and the cost of system development. In this paper, we propose new metrics to measure the complexity of analysis classes which draw out in the analysis phase based on Unified Process. By the collaboration complexity, is denoted by CC, we mean the maximum number of the collaborations can be achieved with each of the collaborator and detennine the potential complexity. And the interface complexity, is denoted by IC, shows the difficulty related to understand the interface of collaborators each other. We prove mathematically that the suggested metrics satisfy OO characteristics such as class size and inheritance. And we verify it theoretically for Weyuker' s nine properties. Moreover, we show the computation results for analysis classes of the system which automatically respond to questions of the it's user using the text mining technique. As we compared CC and IC to CBO and WMC, the complexity can be represented by CC and IC more than CBO and WMC. We expect to develop the cost-effective OO software by reviewing the complexity of analysis classes in the first stage of SDLC (Software Development Life Cycle).