• Title/Summary/Keyword: 유지경화

Search Result 346, Processing Time 0.029 seconds

Development of Large Diameter Hardfacing FCW for Life Extension of Hot Forging Die (열간단조 금형 수명연장을 위한 경화육성용접용 태경 FCW의 개발)

  • Kim, Sung-Ho;Jung, Yun-Ho;Baek, Seung-Hui;Jang, Jong-Hun;Park, Chul-Gyu;Woo, Hee-Chul;Jung, Byung-Ho;Cho, Sang-Myung
    • Proceedings of the KWS Conference
    • /
    • 2009.11a
    • /
    • pp.13-13
    • /
    • 2009
  • 현재 열간단조 금형을 제작함에 있어 육성용접을 실시하는 방법이 금형강 STD61, STD11 등으로 제작하는 방법에 비해 보수나 비용적인 측면에서 이점을 가지고 있기 때문에 점차적으로 증가하고 있는 추세이다. 열간단조 공정에서 금형은 $1000^{\circ}C$이상의 고온재료와 반복접촉하게 된다. 이때 이형제의 사용은 급속냉각 및 급속가열의 열피로를 가속시킨다. 또한, 금형은 반복충격에 의한 기계적 피로를 받게 된다. 이러한 금형의 사용환경을 고려한 FCW는 종래 고가의 $2.8{\sim}3.2{\Phi}$인 외국산 FCW를 사용하였으나 이를 대체한 $3.2{\Phi}$ 태경 FCW가 국내에서 개발되었다. 하지만 개발된 FCW를 사용하여 제작된 금형의 수명이 부족한 현상이 발생하였다. 이에 금형의 수명을 연장시킬 수 있는 내균열성 및 내열충격성을 확보한 태경 FCW의 개발과 개발된 FCW의 성능평가가 요구되었다. 특히 열간단조 금형에 있어서 중요한 내열충격성의 경우 가열과 냉각의 반복 Cycle에 의한 Thermal shock의 평가가 대부분이며 높은 Cycle로 인해 많은 시간이 걸리며, 또한 가열과 냉각을 오갈 수 있는 고가의 시험장치가 요구된다. 그러므로 개발된 FCW 육성용접부의 내균열성 및 내열충격성을 평가할 수 있는 방법에 대한 연구와 특히 내열충격성을 시간이 적게 걸리면서도 경제적으로 평가할 수 있는 방법에 대한 연구가 필요하다. 본 연구의 목적은 열간단조 금형 육성용접부의 내균열성 및 열충격특성을 평가할 수 있는 방법에 대한 검토와 특히 내열충격성에 대해 J.W.Kim등의 시험방법을 참고하여 시간이 적게 걸리면서 저 비용으로 열 충격특성을 평가할 수 있는 시험법을 고안하는 것이다. 이를 위한 방법으로 육성용접부의 내균열성을 평가하기 위한 상온 Bending을 실시하였고, 내열충격성을 평가하기 위한 염욕로를 이용하는 고온 Bending을 고안하여 실시하였다. 상온 Bending, 고온 Bending 모두 3점 굽힘시험을 적용하였다. 고온 Bending의 가열방법으로는 염욕로를 사용하여 시편이 대기중에서 약 $850^{\circ}C$의 온도가 될 수 있도록 하였다. 시편은 각각 열처리를 하여 요구 경도를 확보하였고, 이를 염욕로에서 5분간 가열 및 유지하여 취출 후 굽힘하중을 가하여 변위의 정도로 열충격을 평가하는 방법을 사용하였다. 상온 Bending은 극한변형량과 파단부 극한응력으로, 고온 Bending은 고온 극한변형량으로 평가를 하였고, 외국산 FCW를 사용한 육성용접부를 비교대상으로 하였다. 평가 결과 개발된 국산 $3.2{\Phi}$ 태경 FCW의 성능은 외국산 FCW와 유사하거나 우수한 것으로 평가되었고, 실제 금형을 제작하여 현장에 적용한 결과 금형의 수명이 연장된 것이 나타났다.

  • PDF

The Necessity of Resetting the Filter Criteria for the Minimization of Dose Creep in Digital Imaging Systems (디지털 영상 시스템에서 선량 크리프 최소화를 위한 부가 필터 두께 권고 기준의 재설정에 대한 연구)

  • Kim, Kyo Tae;Kim, Kum Bae;Kang, Sang Sik;Park, Ji Koon
    • Journal of the Korean Society of Radiology
    • /
    • v.13 no.5
    • /
    • pp.757-763
    • /
    • 2019
  • Recently, Following the recent development of flat panel detector with wide dynamic ranges, increasing numbers of healthcare providers have begun to use digital radiography. As a result, filter thickness standards should be reestablished, as current clinical practice requires the use of thicknesses recommended by the National Council on Radiation Protection and Measurements, which are based on information, acquired using conventional analog systems. Here we investigated the possibility of minimizing dose creep and optimizing patient dose using Al filters in digital radiography. The use of thicker Al filters resulted in a maximum 19.3% reduction in the entrance skin exposure dose when medical images with similar sharpness values were compared. However, resolution, which is a critical factor in imaging, had a significant change of 1.01 lp/mm. This change in resolution is thought to be due to the increased amount of scattered rays generated from the object due to the X-ray beam hardening effect. The increase in the number of scattered rays was verified using the scattering degradation factor. However, the FPD, which has recently been developed and is widely used in various areas, has greater response to radiation than analog devices and has a wide dynamic range. Therefore, the FPD is expected to maintain an appropriate level of resolution corresponding to the increase in the scattered-ray content ratio, which depends on filter thickness. Use of the FPD is also expected to minimize dose creep by reducing the exposure dose.

Case Study of High-value Product Development Utilizing Natural Resources from DMZ (접경지역 천연자원 활용 고부가가치 제품개발 사례)

  • Ko, Hye-Jin;Cho, Young-Rak;Park, Ju-Hyoung;Lee, Jung A;Ahn, Eun-Kyung
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2019.10a
    • /
    • pp.5-5
    • /
    • 2019
  • DMZ는 살아있는 생물다양성의 보고로 지난 60여년동안 자연적으로 재생이 일어나고 환경적인 강제 보존 영향으로 높은 생태학적인 가치가 유지되고 있으며, 최근에는 남북교류에 대한 활발한 의지로 DMZ생태자원의 남북공동활용 방안에 대한 이슈가 급부상하고 있다. 이에 본 연구진은 3년전부터 DMZ에서 자생하는 식물에 대한 조사를 진행하여 총 200여종 이상의 자생식물의 표본과 추출물들을 보유하고 있으며, 이 추출물들을 활용 in vitro 와 in vivo 평가를 통해 비임상 평가에서 유효한 효과를 나타내는 후보물질들을 다수 찾아낼 수 있었다. 그 중 조팝나무(Spiraea prunifolia var. simpliciflora)는 쌍떡잎식물 장미과에 속하는 낙엽활엽관목으로 동북아시아 지역에 널리 분포되며 우리나라에서는 중부지방에 주로 서식한다고 알려져 있다. 예로부터 해열 및 소염, 신경통완화 치료등에 이용해왔다고 알려져 있으며 그 속에는 다양한 terpenoids, flavonoid 및 phenolic 화합물이 다량 함유되어 있다고 알려져 있다. 본 연구에서는 조팝나무 추출물을 이용하여 전구지방세포에서의 지방세포분화 억제 및 관련 유전자들의 활성을 확인한 후 고지방식이로 유도된 high-fat diet mouse model을 이용하여 체지방 감소 및 내장지방감소, 간 조직내의 지방량 감소등을 확인하였으며, 혈액분석을 통해 총콜레스테롤과 고중성지방등 동맥경화와 심혈관계 질환을 유도시킬수 있는 지표들에서 억제 활성도 확인하였다. 특히 내장 지방의 경우는 Micro-CT를 통해 정밀한 분석을 진행하였고, 체지방뿐만 아니라 전체 체중감소도 나타나는 것을 확인하였다. 현재 실험을 통해 적출된 간 조직과 지방조직을 이용하여 항 비만 활성의 작용기전을 지속적으로 확인하고 있으며, 이 결과는 국제적인 연구저널에 보고되어 향후 체지방 감소 또는 항 비만 치료제로 개발되는 비임상 연구자료로 활용될 계획이다. 이미 조팝나무에 대한 연구결과는 특허로 출원이 완료되어 PCT출원까지 진행중에 있으며 개별인정형 건강기능식품 개발 기업에 기술이전이 될 예정이다. 또한 원활한 원료 수급을 위해 기초단체 소속 농업기술센터와 원료 재배 및 대량 수급에 관한 논의를 마친 상태로 접경지역 근처 농가소득 증대로도 이어지는 제품화 사례이기도 하다. 이는 접경지역에서 자생하는 원료의 활성을 과학적으로 검증하여 기업과의 연계를 통해 기초시군 단체의 농가 소득과도 연계한 우수한 제품개발 사례로 향후에도 이와 같은 연구성과가 지속적으로 도출되기를 기대해본다.

  • PDF

Low temperature growth of Ga2O3 thin films on Si substrates by MOCVD and their electrical characteristics (MOCVD에 의한 Si 기판 위의 Ga2O3 박막 저온 결정 성장과 전기적 특성)

  • Lee, Jung Bok;Ahn, Nam Jun;Ahn, Hyung Soo;Kim, Kyung Hwa;Yang, Min
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.32 no.2
    • /
    • pp.45-50
    • /
    • 2022
  • Ga2O3 thin films were grown on n-type Si substrates at various growth temperatures of 500, 550, 600, 650 and 700℃. The Ga2O3 thin films grown at 500℃ and 550℃ were characterized as featureless flat surface. Grown at higher temperatures (600, 650, and 700℃) showed very rough surface morphology. To figure out the annealing effect on the thin films grown at relatively low temperatures (500, 550, 600, 650 and 700℃), the Ga2O3 films were thermally treated at 900℃ for 10 minutes. Crystal structure of the Ga2O3 films grown at 500 and 550℃ were changed from amorphous to polycrystalline structure with flat surface. Ga2O3 film grown at 550℃ was chosen for the fabrication of a Schottky barrier diode (SBD). Electrical properties of the SBDs depend on the thermal treatment were evaluated. A MSM type photodetector was made on the low temperature grown Ga2O3 thin film. The photocurrent for the illumination of 266 nm wavelength showed 5.32 times higher than dark current at the operating voltage of 10 V.

Phenotype Changes in Immune Cell Activation in Obesity (비만 환경 내 면역세포 활성화 표현형의 변화)

  • Ju-Hwi Park;Ju-Ock Nam
    • Journal of Life Science
    • /
    • v.33 no.3
    • /
    • pp.295-303
    • /
    • 2023
  • Immune and metabolic systems are important factors in maintaining homeostasis. Immune response and metabolic regulation are highly associated, so, when the normal metabolism is disturbed, the immune response changed followed the metabolic diseases occur. Likewise, obesity is highly related to immune response. Obesity, which is caused by an imbalance in energy metabolism, is associated with metabolic diseases, such as insulin resistance, type 2 diabetes, fatty liver diseases, atherosclerosis and hypertension. As known, obesity is characterized in chronic low-grade inflammation. In obesity, the microenvironment of immune cells became inflammatory by the unique activation phenotypes of immune cells such as macrophage, natural killer cell, T cell. Also, the immune cells interact each other in cellular or cytokine mechanisms, which intensify the obesity-induced inflammatory response. This phenomenon suggests the possibility of regulating the activation of immune cells as a pharmacological therapeutic strategy for obesity in addition to the common pharmacological treatment of obesity which is aimed at inhibiting enzymes such as pancreatic lipase and α-amylase or inhibiting differentiation of preadipocytes. In this review, we summarize the activation phenotypes of macrophage, natural killer cell and T cell, and their aspects in obesity. We also summarize the pharmacological substances that alleviates obesity by regulating the activation of immune cells.

Anti-thrombotic effect of artemisinin through regulation of cAMP production and Ca2+ mobilization in U46619-induced human platelets (U46619 유도의 사람 혈소판에서 cAMP 생성 및 Ca2+동원의 조절을 통한 Artemisinin의 항혈전 효과)

  • Chang-Eun Park;Dong-Ha Lee
    • Journal of Applied Biological Chemistry
    • /
    • v.66
    • /
    • pp.402-407
    • /
    • 2023
  • The regulation of platelet aggregation is crucial for maintaining normal hemostasis, but abnormal or excessive platelet aggregation can contribute to cardiovascular disorders such as stroke, atherosclerosis, and thrombosis. Therefore, identifying substances that can control or suppress platelet aggregation is a promising approach for the prevention and treatment of these conditions. Artemisinin, a compound derived from Artemisia or Scopolia plants, has shown potential in various areas such as anticancer and Alzheimer's disease research. However, the specific role and mechanisms by which artemisinin influences platelet activation and thrombus formation are not yet fully understood. This study investigated the effects of artemisinin on platelet activation and thrombus formation. As a result, cAMP production were increased significantly by artemisinin, as well as phosphorylated VASP and IP3R which are substrates to cAMP-dependent kinase by artemisinin in a significant manner. The Ca2+ normally mobilized from the dense tubular system was inhibited due to IP3R phosphorylation from artemisinin, and phosphorylated VASP by artemisinin aided in inhibiting platelet activity via αIIb/β3 platelet membrane inactivation and inhibiting fibrinogen binding. Finally, artemisinin inhibited thrombin-induced thrombus formation. Therefore, we suggest that artemisinin has importance with cardiovascular diseases stemming from the abnormal platelets activation and thrombus formation by acting as an effective prophylactic and therapeutic agent.

An Analysis of a Porous Film Containing $Chamaecyparis$ $obtusa$ Extract (편백나무 추출물을 함유한 다공성 필름 분석)

  • Kim, Kyeong-Yee;Lee, Eun-Kyung
    • The Korean Journal of Food And Nutrition
    • /
    • v.24 no.4
    • /
    • pp.551-558
    • /
    • 2011
  • This present study was performed to analyze the efficiency and volatility of a porous film containing $Chamaecyparis$ $obtusa$ extract as a method to effectively package food compounds. Phytoncide was contacted the state of gas and showed effective antimicrobial properties. Limonene can be distilled without decomposition as a relatively stable terpene and was one of the extract components. $Chamaecyparis$ $obtusa$ essential oil. The optimal solvent composition was a ratio 5:20:0.3 of T-500:ethanol:hardener to effectively manufacture film containing phytoncide essential oil and the minimum antibacterial concentration was 2%. The films were made under different conditions(A-50LF1, A-25SF2, B-50SF1, C-50LF1, C-25SF2 and D-50SF1) containing phytoncide and the amounts of limonene inside the 1-L reaction chamber depending on storage were measured by gas chromatography-mass selective detention. The results showed that the 25SF2(width, 25 mm; length, 20 cm) revealed more amount of limonene compared with 50LF1(width 50 mm, length 20 cm). We confirmed that the gas emission amount showed a better layer on the film side than on the internal film. An effect of film thickness on phytoncide emissions was observed in that the amounts was less than the expectation for a thicker film at the beginning time, but the emitting amounts increased with increasing storage periods. In the storage testing of various films at $35^{\circ}C$ and 70% humidity for 14 days, 25SF2 showed longer preservation compared with that of 50LF in the case of bread. $C.$ $obtusa$ essential oil is a useful fresh ingredients, hence, analysis of limonene emission kinetics from various film was helpful to develop films with an optimal antimicrobial effect, and will allow application of such films in food packaging systems.

The Effect of Grape Seed Oil, Perilla Oil, or Corn Oil-Containing Diet on Lipid Patterns in Rats and Fatty-Acid Composition in Their Liver Tissues (포도씨유, 들깨유 및 옥수수유의 급여가 흰쥐의 체내 지질패턴 및 간조직의 지방산 조성에 미치는 영향)

  • Kang Myung-Hwa;Park Won-Jong;Lee Ji-Hyun;Chung Hae-Kyung
    • Journal of Nutrition and Health
    • /
    • v.38 no.1
    • /
    • pp.3-10
    • /
    • 2005
  • The study analyzed the lipid patterns and fatty acid compositions of serum and liver tissues in groups of Sparague-Dawley rats. Some of the groups were fed with an basal diet, which contained com oil (C), grape seed oil (GSO), or perilla oil (P), and the others were fed with a high fat diet, which had cholesterol (1%) and lard (10%) mixed with corn oil (CHF), grape seed oil (GSHF), or perilla oil (PHF). The amount of dietary intake was higher for the basal diet groups than the high fat diet groups. And diet efficiency was significantly low in the group of rats fed with the basal diet mixed with perilla oil. From the analysis of the serum lipid patterns, a significant decrease in total lipid concentration was observed in the group of rats fed on the basal diet mixed with perilla oil and the high fat diet group. The levels of triglyceride and phospholipid were significantly low in the basal diet group when perilla oil or grape seed oil was involved. The ordinary diet groups showed significantly higher in HDL-C than the high fat diet groups. There was no significant difference among the basal diet groups, whether the diet was mixed with grape seed oil, perilla oil, or com oil. However, a significant increase in HDL-C was observed in the group of rats fed with the high fat diet containing perilla oil. For LDL-C, there was a significant difference between the high fat diet groups and the basal diet groups. LDL-C was especially low in the group of rats fed with the high fat diet to which perilla oil was added, and the grape seed-added high fat diet group showed a decreasing tendency in LDL-C. The content of total fat, total cholesterol, and triglyceride was the lowest in the group of rats fed with the perilla oil-containing basal diet, and this group was followed in order by the grape seed oil-containing diet group and com oil-containing diet group. In the analysis of the fatty-acid composition in liver tissue, the high fat diet groups showed an increase in saturated fatty acids and polyunsaturated fatty acids, but a decrease in mono unsaturated fatty acids when compared to the basal diet groups. The composition ratio of fatty acids varied according to which type of oil the diet contains. Our finding suggest that grape seed oil was an apparent diet effect on the fatty-acid composition.

Rheological properties of dental resin cements during polymerization (치과용 레진 시멘트의 유변학적 성질)

  • Lee, Jae-Rim;Lee, Jai-Bong;Han, Jung-Suk;Kim, Sung-Hun;Yeo, In-Sung;Ha, Seung-Ryong;Kim, Hee-Kyung
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.52 no.2
    • /
    • pp.82-89
    • /
    • 2014
  • Purpose: The purpose of this study was to observe the change of viscoelastic properties of dental resin cements during polymerization. Materials and methods: Six commercially available resin cement materials (Clearfil SA luting, Panavia F 2.0, Zirconite, Variolink N, RelyX Unicem clicker, RelyX U200) were investigated in this study. A dynamic oscillation-time sweep test was performed with AR1500 stress controlled rheometer at $32^{\circ}C$. The changes in shear storage modulus (G'), shear loss modulus (G"), loss tangent (tan ${\delta}$) and displacement were measured for twenty minutes and repeated three times for each material. The data were analyzed using one-way ANOVA and Tukey's post hoc test (${\alpha}$=0.05). Results: After mixing, all materials demonstrated an increase in G' with time, reaching the plateau in the end. RelyX U200 demonstrated the highest G' value, while RelyX Unicem (clicker type) and Variolink N demonstrated the lowest G' value at the end of experimental time. Tan ${\delta}$was maintained at some level and reached the zero at the starting point where G' began to increase. The tan ${\delta}$and displacement of the tested materials showed similar pattern in the graph within change of time. The displacement of all 6 materials approached to zero within 6 minutes. Conclusion: Compared to other resin cements used in this study, RelyX U200 maintained plastic property for a longer period of time. When it completed the curing process, RelyX U200 had the highest stiffness. It is convenient for clinicians to cement multiple units of dental prostheses simultaneously.

Mechanical Properties of Granulated Ground Blast Furnace Slag on Blended Activator of Sulfate and Alkali (황산염 및 알칼리계의 혼합 활성화제에 대한 고로슬래그미분말의 역학적 특성)

  • Kim, Tae-Wan;Jun, Yu-Bin;Eom, Jang-Sub
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.19 no.5
    • /
    • pp.104-111
    • /
    • 2015
  • This study shows the mechanical properties of alkali-activated slag cement (AASC) synthesized using sulfate with NaOH solution. The used sulfates were calcium sulfate ($CaSO_4$, denoted CS) and sodium sulfate ($Na_2SO_4$, denoted SS). The replacement ratio of sulfates was 2.5, 5.0, 7.5 and 10.0% by weight of slag. NaOH solution of 2M and 4M concentration was used. A sample was activated with sulfate and activated with blended activator (blending NaOH solution with sulfate) respectively. 24 mix ratios were used and the water-binder weight ratio for the test was set 0.5. This research carried out the compressive strength, flexural strength, ultrasonic pulse velocity (UPV), absorption and X-ray diffraction (XRD). In the case of samples with CS, sample with 7.5% CS, sample with 2M NaOH+5.0% CS and sample with 4M NaOH+5.0% CS showed the good performance in the strength development. In the case of samples with SS, sample with 10.0% SS, sample with 2M NaOH+7.5% SS and sample with 4M NaOH+2.5% SS obtained good performance in strength. The results of UPV and water absorption showed a similar tendency to the strength properties. The XRD analysis of samples indicated that the hydration products formed in samples were ettringite, CSH and silicate phases. In this study, it is indicated that when compared to the use of sulfate only, the use of both sulfate and NaOH solution makes mechanical properties of AASC better.