• Journal of the Korean Society of Radiology
• /
• v.6 no.5
• /
• pp.389-394
• /
• 2012

In this study, based on IEC 60601-2-54 standard load conditions presented in the limited interval over the air kerma at the absolute linearity closely evaluated by measuring the X-ray results were as follows: 10 units targeted all Diagnostic X-ray generating device (DR) presented in the IEC 60601-2-54 standard linearity of air kerma emerged as inappropriate, the general evaluation of the dose linearity from four in the top 50% and 80 kVp % of the two measurement series were as irrelevant all the rest from six of the top tube voltage of 50% and 80% of the two measurement series, appeared in all suitable. Presented in IEC 60601-2-54 standard dose linearity testing and conventional linearity tests showed many differences. IEC 60601-2-54 standard linearity in the proposed international standards of air kerma is the recommendation of the existing dose linearity considerably more feasible, and to quantify the amount of radiation as the standard suggested by the standard IEC 60601-2-54 air kerma of a diagnostic X-ray imaging device linearity performance management is considered key elements in the critical appraisal.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.891-898
• /
• 2003

This paper analyzes and proposes a scheme that improves the performance of the RTP that is developed to support the end-to-end transmission function and QoS monitor function for real-time multimedia data transmission. Although the existing RTP module supports real-time transmission, it has some problems in guaranteeing QoS parameters. To solve this problem, we propose a new Selective Repeat Adaptive Rate Control (SRARC). The SRARC can support QoS by referring to the data transmission status from the client and then classifying the network status into three levels. It selectively transmits multimedia data and dynamically controls transmission rates based on such information as bandwidth, packet loss rate, and latency that can be calculated in data transfer phase. To verify the SRARC, we implement it in real local area networks and compare the QoS parameters of the SRARC with those of the SR and RTP By the experimental results, the SRARC shows better performance in the aspects of bandwidth usage rate, packet loss rates, and transmission delays than the existing RTP schemes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.217-226
• /
• 2022

In the view of the application of high-precision spatial information production, UAV (Umanned Aerial Vehicle)-Photogrammetry has a problem in that it lacks specific procedures and detailed regulations for quantitative quality verification methods or certification of captured images. In addition, test tools for UAV image quality assessment use only the GSD (Ground Sample Distance), not MTF (Modulation Transfer Function), which reflects image resolution and contrast at the same time. This fact makes often the quality of UAV image inferior to that of manned aerial image. We performed MTF and GSD analysis simultaneously using a siemens star to confirm the necessity of MTF analysis in UAV image quality assessment. The analyzing results of UAV images taken with different payload and sensors show that there is a big difference in σ_MTF values, representing image resolution and the degree of contrast, but slightly different in GSD. It concluded that the MTF analysis is a more objective and reliable analysis method than just the GSD analysis method, and high-quality drone images can only be obtained when the operator make images after judging the proper selection the sensor performance, image overlaps, and payload type. However, the results of this study are derived from analyzing only images acquired by limited sensors and imaging conditions. It is therefore expected that more objective and reliable results will be obtained if continuous research is conducted by accumulating various experimental data in related fields in the future.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.439-446
• /
• 2023

Ceramic membranes are generally used for various industrial processes operating under extreme conditions because of its high thermal and chemical stability. However, due to the trade-off phenomenon of permeability and mechanical strength, preparation of high permeability-high strength membrane is necessary. In this study, the change in characteristics and performances of ceramic membranes was analyzed depending on the type of polymer binder and its mixing ratio. Because the solubility between solvent and polymer binder was higher in PSf (polysulfone) than in PES (polyethersulfone), the viscosity and discharge pressure of the PSf-based dope solution were higher than those of PES-based dope solution. When PSf was used as a polymer binder, ceramic membrane showed high mechanical strength and low water permeability due to the dense structure. On the other hand, in case of PES, the mechanical strength was slightly reduced and the water permeability was increased. It was confirmed that the optimum mixing ratio of the PSf and PES with high water permeability and mechanical strength was 9:1.

• Korean journal of applied entomology
• /
• v.56 no.2
• /
• pp.187-193
• /
• 2017

The Japanese pine sawyer, Monochamus alternatus Hope, is a representative vector of the pine wood nematode, Bursaphelenchus xylophilus, which causes wilting symptoms in pine trees. A control method using a net has been introduced, which is an alternative method to the fumigation for the control of dead pine trees by pine wilt disease. This study was carried out to investigate the factors that induce gnawing and escaping behaviors of M. alternatus. The behaviors were examined after M. alternatus adult was placed in a confined space at different temperatures. M. alternatus adults could escape through mesh net torn by gnawing when they were confined in a space of 30 mm or less in diameter. The success rate of escape was high at 20 to $30^{\circ}C$, and no adults escaped at $15^{\circ}C$. The enticement of M. alternatus adults by food didn't affect the success rate of escape. In the case of not being confined in a narrow space, the escaping hole could not be formed because the gnawing was not concentrated on one part. M. alternatus moved its body in a narrow space using the tarsus of middle and hind legs, and made an escape hole by concentrically gnawing the obstacle on the front side with mandible, and showed a behavior of getting out while supporting the body by supporting the front legs. The present results will be able to use as an important basic information for evaluating the performance of mesh net which confines M. alternatus adults and suggested by alternative method to fumigation technology.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.679-684
• /
• 2017

The influence of catalytic activity on Fe loading methods over Fe/BEA zeolite catalyst in the simultaneous reduction of $N_2O/NO$ has been studied. The Fe/BEA zeolite catalysts were prepared by ion exchange and impregnation. Catalytic tests were carried out in the selective catalytic reduction using ammonia as a reductant to identify the activity of prepared catalysts. The results show that the ion exchanged catalyst exhibited higher NO and $N_2O$ conversions than the impregnated catalysts did. To investigate the difference in catalytic activity, we performed various analyses such as XRD, $H_2-TPR$, $O_2-TPD$ and XPS. It is considered that the increase in the activity of the ion exchange catalyst is due to improved reducibility and increased oxygen desorption rate. In addition, the ion exchange catalyst was found through the XPS analysis that $Fe^{2+}$, which is related to the catalytic activity, is formed about 1.6 times more than the impregnated catalyst.

• Membrane Journal
• /
• v.27 no.3
• /
• pp.263-272
• /
• 2017

There are several different methods to characterize membrane pore size distribution, however, it is yet difficult to accurately measure pore size range of 10-50 nm. In this work, we employed gas-liquid displacement porometer (GLDP) and liquid-liquid displacement porometer (LLDP) to characterize in-house alumina hollow fiber membrane (K-100) and commercial membranes (A-100, A-20) that exhibit pore sizes between 10-100 nm. GLDP method was more suitable for measuring the maximum pore size, and the measured mean pore size of the membranes by LLDP were better correlated with water permeability and solute rejection. It was determined that LLDP is effective for measuring pore sizes between 10-50 nm; however, the method holds intrinsic disadvantages such as low precision and high sensitivity compared to that of GLDP. Nevertheless, it is expected that the recently commercialized LLDP technique can provide useful data that other methods cannot.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.555-561
• /
• 2014

For five diagnostic X-ray generators (DR), four units turned out to be appropriate in tests on the reproducibility of radiation output suggested in the IEC 60601-2-54 standard, but in one unit of the X-ray equipment, an item measured in a combination of 50% of the highest tube voltage of the diagnostic X-ray equipment, the test setting of Group C with authorized output doses between $1{\mu}Gy$ and $5{\mu}Gy$ of mAs turned out to be inappropriate. As a result, the radiation dose to the IEC 60601-2-54 standard for quantification standards proposed by the radiation output from diagnostic X-ray imaging device reproducibility of performance management should be aware that an important evaluation factor.

• Journal of Korea Water Resources Association
• /
• v.44 no.2
• /
• pp.135-144
• /
• 2011

Direct parameter estimation method is verified with various models based on Neyman-Scott rectangular pulse model (NSRPM). Also, newly modified NSRPM (NMSRPM) that uses normal distribution is developed. Precipitation data observed by Korea Meteorological Administration (KMA) for 47 years is applied for parameter estimation. For model performance verification, we used statistics, wet ratio and precipitation accumulate distribution of precipitation generated. The comparison of statistics indicates that absolute relative error (ARE)s of the results from NSRPM and modified NSRPM (MNSRPM) are increasing on July, August, and September and ARE of NMNSRPM shows 10.11% that is the smallest ARE among the three models. NMNSRPM simulates the characteristics of precipitation statistics well. By comparing the wet ratio, MNSRPM shows the smallest ARE that is 16.35% and by using the graphical analysis, we found that these three models underestimate the wet ratio. The three models show about 2% of ARE of precipitation accumulate probability. Those results show that the three models simulate precipitation accumulate probability well. As the results, it is found that the parameters of NSRPM, MNSRPM and NMNSRPM are able to be estimated by the direct parameter estimation method. From the results listed above, we concluded that the direct parameter estimation is able to be applied to various models based on NSRPM. NMNSRPM shows good performance compared with developed model-NSRPM and MNSRPM and the models based on NSRPM can be developed by the direct parameter estimation method.

• Membrane Journal
• /
• v.17 no.2
• /
• pp.146-160
• /
• 2007

A parametric study on pervaporation-facilitated esterification was performed by using a practical model based on non-perfect separation through membrane which is not perfectly permselective to water. Thus, membrane selectivity as well as membrane capability to remove water should be taken into account in establishing the simulation model to explain how the membrane separation influence the esterification reaction process. It was shown by simulation that in the reaction systems with non-perfect separation, the permeation of reactants which are acid or/and alcohol retards the reaction by inducing the backward reaction so that reaction conversion curve is located between a reaction system coupled with pervaporation process having a perfect permselectivity to water and a reaction system without pervaporation process. The volume change of reaction system occurs as a result of the permeation through the membrane. The reaction volume change which can be characterized by the reaction ratio of $r_{\Psi}\;to\;r_{{\Psi}=1}$ affects reaction kinetics by concentrating reactants and products, respectively, with different extent with time; reactant-concentrating effect is dominant during the initial stage of reaction, resulting in facilitating the reaction, and then product-concentrating effect is exerted more on reaction, causing to slow down the reaction. When pervaporative dehydration is applied to the reaction system plays an important role in the reaction as well. The effect of timing to impose pervaporation on reaction system affected the reaction kinetics in terms of reaction rate and reaction conversion. A relationship was derived to explain membrane unit capacity and reaction parameters that will be used as a design tool to determine membrane unit capacity at a given reaction conditions or reaction parameters at a membrane unit capacity.