• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.906-909
• /
• 2005

This study provides the method to build the rotor system model using dynamic analysis software. also, it introduces the traditional methods of the rotor system modeling and informs the each merits and demerits. We will make up the flexible system of rotor system model with ADAMS, multi-body dynamics S/W, in order to develop dynamics model and get the response of plant model near to real model through connection the SIMULINK of MATLAB. We will develop the computing dynamics-controling model possible controlled simulation similar to a real model with controlling the plant model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.425-426
• /
• 2006

This study proposes a new simulation method of high speed rotor system with the dynamic model using multi body dynamic analysis tool and with a new phase modulating technique as a system control algorithm. A dynamic model of high speed rotor system was built by, ADAMS, commercial multi body dynamic program. The phase modulating technique is a new control algorithm for a rotor system. This algorithm can control system using an adaptive proportional gain and an adaptive phase which are obtained from periodical input signal. To make control system, a ADAMS model and component parameters and phase controller was composed by Matlab Simulink And simulate it.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.261-262
• /
• 2006

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.280-283
• /
• 2005

This study performed by a previous research for the applying expert system to active vibration control algorithm. In order to increase productivity and efficiency, high-speed rotating machines become popular these days. They are likely to vibrate and cause machine failure even though they have small unbalance. Therefore, a high-speed rotating machine needs a balancing technique. ISO 11342 classifies flexible rotors in accordance with their balancing requirements and establishes methods of assessment of residual unbalance. But, even if they finished balancing work, they have harmful effect vibration under the high-speed rotating environment. This vibration effect is very small, but it must be removed for the improvement of the rotor's spin accuracy. This paper introduces a new active control method that remove the exciting force by a phase control. For this method, the high-speed rotating rotor was reconstructed by a flexible rotor model. The forces which excite the rotating system suppose cyclic forces, we obtain the responses by numerical method. And then through the pattern analysis about the vibraton responses, the controler generate the control force with the reverse phase and similar magnitude. This paper suggest an phase control method and shows how to improve the rotating vibration accuracy of the flexible rotor dynamics system using phase control method.

• 대한기계학회논문집A
• /
• 제38권9호
• /
• pp.925-932
• /
• 2014

회전체의 자이로스코픽 모멘트가 크거나 회전속도가 고속인 경우 회전속도에 따라 회전체의 동역학적 특성이 변화하는 정도가 커지게 되며, 자기베어링을 이용하여 회전축을 지지하는 경우 자기베어링의 제어기는 회전속도의 영향을 고려하여야 한다. 각 축의 부상력이 해당 축의 센서 출력에 의해서만 결정되는 독립축 제어기는 회전속도에 따른 변화에 대응하기 어려운 구조이나, 혼합축 제어기는 센서출력을 변환하여 진동 모드와 일치하도록 하고 각각의 진동 모드에 대해 독립적으로 제어기가 작동하는 구조로서, 진동 모드에 직접적으로 대응할 수 있는 장점이 있다. 본 논문에서는 회전체의 유연 모드를 포함하는 자기베어링 시스템의 수학적 모델을 기반으로 혼합축 제어기를 설계하고 제어기의 성능을 ISO 민감도 기준 및 불평형질량 응답 측면에서 평가하였다. 제어기 성능 평가 시 회전속도에 따른 시스템의 동특성 변화를 고려하여, 운전 속도 범위에서 성능 지표를 만족함을 확인하였다.