• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.555-557
• /
• 2005

This paper proposed a hydraulic pump system that is driven by a variable SR drive. The operating pressure of hydric pump is limited by the pump speed and the mechanical structure. The operating of hydraulic pump is separated as constant pressure and constant flow region. Under fixed speed, the pressure can be controlled as constant value, and then decreased by increasing of pump speed. A 2.2[kW], 12/8-pole SR motor and DSP based digital controller are designed and tested for hydraulic pump system. The test results show that the system has some good features such as high efficiency and high response characteristics.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.3-3
• /
• 1997

미사일 수직발사 시스템은 공간을 작게 차지하고 간편하여 각국이 선호하고 있다. 그러나 수직발사 초기에는 매우 낮은 속도로 상승하므로 Fin의 공력이 발생하지 않기 때문에 추력방향을 직접제어하지 않으면 안된다. 추력방향 제어장치는 Gimbal, Jet Vane, Jet Tab, Secondary Injection 등 여러 방식이 있으나 Jet Vane Type의 추력 방향 제어장치는 응답이 빠르고 경량화가 가능하며 후방 Fin과의 연동 및 작동 후 분리가 가능하다는 장점으로 인해 수직발사 미사일의 초기 방향제어에 주로 사용한다. 이 장치는 Vane이 화염 속에서 직접 구동되므로 고내열성 재료의 기술이 필요하며 미사일의 전체 System에 요구되는 Side Force를 발생시키기 위한 Vane의 최대 받음각 및 회전속도를 결정해야 한다. 따라서 초음속 유동해석을 통해서 Vane의 받음각에 대한 Side Force와 Torque를 계산하며, 구조해석을 통해 Side Force가 가해지는 동안의 Housing의 굽힘, 비틀림 하중 등을 계산하였다. 또한 Controller는 기존의 유압방식보다도 소형이며 복잡하지 않고 가격이 싼 DC Motor와 감속기를 이용하여 빠른 응답성에 부합토록 설계하였다. 본론에서는 성능과 관련된 초기 요구조건에 대한 최적설계의 변수들을 해석하고. 그에 따른 개발사양, 개발 과정, 구조, 시험방법 등에 대해 고찰하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2004.05b
• /
• pp.166-168
• /
• 2004

근래에 무인 자동화기술의 발달과 마이크로프로세서 기술의 혁신적인 성장에 힘입어 일반산업현장에서 사용되고 있는 로봇은 복잡하고 다양한 작업이 요구되는 비제조업분야로 그 적용분야가 확장되고 있다. 그 대표적인 분야를 들자면 방사능 지역과 같은 위험한 환경에서의 작업, 우주공간이나 심해에서의 작업, 활선 작업과 같이 사람이 접근하기 어려운 곳에서 인간을 대신하는 작업 등이 있다. 이와 같이 사람이 접근하기 어려운 지역에서 인간을 대신하여 작업을 수행할 수 있는 원격작업 로봇시스템을 개발하였다. 개발된 로봇은 6 자유도를 갖는 수평다관절 유압구동형 조작기로써 로봇의 운반 및 설치가 용이하도록 제 1 링크의 분리가 가능하도록 설계하였다. 로봇의 제어기는 전체 제어기를 통괄하는 1 개의 마스터 CPU 및 3 개의 제어보드로 구성되며 이들은 VME 버스를 이용하여 데이터를 전송한다. 로봇의 관리제어시스템은 그래픽워크스테이션을 이용하여 구성하였으며 로봇의 작업상황을 실시간으로 애니메이션하여 작업자에게 원격현장감을 제공하고 작업효율의 향상시켰다.

• The Journal of Korea Robotics Society
• /
• v.5 no.2
• /
• pp.160-168
• /
• 2010

In order to achieve a force controller with high performance, an accurate torque servo is required. However, the precise torque servo for a double vane rotary actuator system has not been developed till now, due to many nonlinear characteristics and system parameter variations. In this paper, the torque servo structure for the double vane rotary actuator system is proposed based on the torque model. Nonlinear equations are set up using dynamics of the double vane rotary hydraulic actuator system. Then, to derive the torque model, the nonlinear equations are linearized using a taylor series expansion. Both effectiveness and performance of the design of torque servo are verified by torque servo experiments and applying the suggested torque model to an impedance controller.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.84-93
• /
• 2004

This study carries out the performance improvement and simplification of hydraulic modulator that plays an important role in vehicle stability control systems. The mathematical models for each component of a modulator, such as pump, wheel cylinder, check and solenoid valve, accumulator, damper are derived in detail. All the mathematical models are combined to form a modulator system and implemented through a computer program, which can be controlled by a user friendly GUI. To verity the simulation, comparison between simulation and experiments has been made. After the verification of the validity of the simulation, the effects of the design parameters of the modulator on the wheel cylinder pressure is investigated. The results show that the modulator without MPA has advantage in early time pressure rise rate, and it can be simplified.

• The Journal of Korea Robotics Society
• /
• v.14 no.4
• /
• pp.348-356
• /
• 2019

The backdrivable servovalve is a desirable component for force and interaction control of hydraulic actuation systems because it provides direct force generation mechanical impedance reduction by its own inherent backdrivability. However, high parametric uncertainty and friction effects inside the hydraulic actuation system significantly degrade its advantage. To solve this problem, this letter presents a disturbance-adaptive robust internal-loop compensator (DA-RIC) to generate ideal interactive control performance from the backdrivable-servovalve-based system. The proposed control combines a robust internal-loop compensator structure (RIC) with an explicit disturbance estimator designed for asymptotic disturbance tracking, such that the controlled system provide stable and ideal dynamic behavior for impedance control, while completely compensating the disturbance effects. With the aid of a backdrivable servovalve, we show that the proposed control structure can be implemented based on a simplified nominal model, and the controller enables implementation without accurate knowledge of the target system parameters and disturbances. The performance and properties of the proposed controller are verified by simulation and experiments.

• Journal of Drive and Control
• /
• v.18 no.2
• /
• pp.32-37
• /
• 2021

The piston reservoir is mainly used in hydraulic blow-down system for aerospace engineering. The reservoir is heavy due to both hydraulic cylinder and piston in pressurization. The positive expulsion tank with rubber diaphragm has been mostly applied propellant and fuel tank at low pressure to satellites. To reduce weight, the reservoir that can be used at high pressure with rubber diaphragm was developed. In this research, the prediction of life-time for the rubber diaphragm was implemented through an accelerated life test, as a part of development of new reservoir. Also, the diaphragm was stored in an temperature chamber at the same condition as and operation with hydraulic oil. As a result, the life-time for a rubber diaphragm was successfully evaluated via Arrhenius law and Time-Temperature Superposition based on failure times over temperatures in the accelerated test.

• The Journal of Korea Robotics Society
• /
• v.16 no.2
• /
• pp.79-85
• /
• 2021

Soft fluidic actuators (SFAs) are widely utilized in various areas such as wearable systems due to the inherent compliance which allows safe and flexible interaction. However, SFA-driven systems generally require a large pump, multiple valves and tubes, which hinders to develop a miniaturized system with small range of motion. Thus, a highly integrated soft actuator needs to be developed for implementing a compact SFA-driven system. In this study, we propose an electro-hydraulic soft zipping actuator that can be used as a miniature pump. This actuator exerts tactile force as a dielectric liquid contained inside the actuator pressurized its deformable part. In addition, the proposed actuator can estimate the internal dielectric liquid thickness by using its self-sensing function. Besides, the electrical characteristics and driving performance of the proposed system were verified through experiments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.131-136
• /
• 2004

The limited slip differential(LSD) is a device which enables the driving force to be transmitted from one slipping wheel to another wheel in such case that the car is stuck in clay or snow. When the unwanted slipping occurs on one wheel, the LSD temporarily restraints the differential motion to transmit the driving force in the other wheel. So far, many types of LSD were developed such as mechanical lock type, disk clutch type, viscous coupling type, torsion type and multiple clutch type. However these types of LSD is too complicated and expensive, so it is used only for 4WD outdoor vehicles, military vehicles, and a portion of deluxe car. So, many studies has been devoted to improve new types of LSD to cover those demerits of existing LSDs that the hydraulic LSD is developed as arepresentative result of that. The hydraulic LSD which uses the principle of gear pump is packed with viscous oil in tight container. When a slip occurs on one wheel, the hydraulic LSD generates torque caused by high oil pressure in the container. This study has been devoted to suggest an improved hydraulic LSD. In order to achieve it, we designed a new type of hydraulic LSD, produced it and did a rig test with it on real vehicle. From the rig test, it has been confirmed that the new type of hydraulic LSD can be directly applied to exiting vehicles without changing the design criteria

• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.11
• /
• pp.70-74
• /
• 1991

좌심실보조기의 임상응용범위를 넓히기 위해서 개심술을 하지 않고 좌심실보조기를 적용할 수 있도록 캐뉼라형 좌심실보조기를 이용한 보조순환 실험을 하였다. 좌심실 보조기는 모터의 회전력이 PVC 벨로우즈를 수측, 팽창시키는 전기유압식으로 구동되며 환자는 양쪽 대퇴동맥을 통하여 보조순환을 받도록 되어 있다. 두차례의 동물실험을 통하여 대퇴동맥을 통한 보조 순환방식의 가능성 및 그 효과에 대해서 관찰하였다. 첫 실험은 12kg 개를 이용하여 셀딩거 방법으로 뮬린형 카테터를 디퇴동맥으로 삽입히여, 캐뉼라형 보조순환방법의 가능성을 확인하였고, 두번째 동물실험에서는 내경 4.8 mm의 PVC 카테터를 이용하여 좌심방에 유입카테터를 연결하고 대동맥에 유출카테터를 연결하여 보조순환에 의한 대동맥압의 변화와 혈류량의 변화를 관찰하였다. 보조순환동안 개의 동맥압을 100mmHg로 유지할 수 있었으며, 좌심실내압이 감소하는 것을 관찰할 수 있었다.