• Journal of Nutrition and Health
• /
• v.5 no.4
• /
• pp.169-176
• /
• 1972

The present study was undertaken to determine the metabolic effect of various levels of fat in the diet. Forty males and the same number of females weighing $35{\pm}29$ were divided into three experimental groups and one control group, 10 rats each in both sexes. The dietary lipid contents were included in three levels, 2% as low, 30% as high and fat free diet in order to reflect the lipid consumption of present Korean diet. 20% sugar casein diet were employed as standard for control animals. This study was carried for 16 weeks. After these period animals were sacrificed to collect the internal organs and blood samples by heart puncture. In the result of this study, high fat diet group is lower than low fat diet group in the body weight gain, food efficiency ratio, protein efficiency ratio, urinary nitrogen and organ nitrogen contents were same trend but there is no significant difference in these respects. It was noteworty that high, and free fat diet group revealed more glucose total protein, albumin and globulin contents in the serum than other compared groups. It can be concluded that fat content whether low or high are free in the diet did not show significant effect on body nitrogen metabolism. But 30% high fat diet increased the total lipid and total cholesterol contents in the liver and the serum. This fact can be interpreted that 2% low fat diet and fat free diet do not need to increase the amount of fat content in the diet as high as 30% fat diet. This result might indicate the one possible reason to decide the recommanded dietary fat levels in Korean diet.

• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.342-347
• /
• 2009

We sought to improve the methods for washing fresh raw ginseng. The quality of ginseng surface-washed by different methods was evaluated during storage at 10C and $20^{\circ}C$. The raw ginseng surface-washing method was a full-cone spray-type procedure using water and air. The water for decontamination had an electrolysis value of 80 ppm, also known as electrolysis water $2^{\circ}C$ water and water containing 5 ppm chlorine dioxide, were also used for decontamination. The Hunter color (${\Delta}E$) of ginseng washed with water withan electrolysis value of 80 ppm, or water with 5 ppm chlorine dioxide, was greater than that seen after other washing methods were used. The weight loss after washing with 5 ppm chlorine dioxide water was similar to that seen after washing with $2^{\circ}C$ water or 80 ppm electrolysis water. Reductions in total microorganism levels, and counts of yeasts and molds, assayed 10 days after washing with 5 ppm chlorine dioxide water were greater than seen after use of other sterilization methods. Quality maintenance on storage, at both 10C and 20C, after washing with 80 ppm electrolysis water, was better than that noted after other sterilization methods. The moisture content of washed ginseng was similar under all storage conditions tested.

• Journal of the Korea Concrete Institute
• /
• v.19 no.6
• /
• pp.667-676
• /
• 2007

As the 21st century began, cement and concrete that are representatives of modem building materials became a major factor in global warming, air pollution and environmental pollution. Also, the problems that are generated while pursuing high performance and high strength became social issues. Therefore, it has become urgent to prepare counter plans. This study has aimed at the recycling of sewage sludge ash and developing it as a new concept in building material which serves the environmental considerations for long-lasting developmental purpose. Also, the study aimed to find a substitute for scarce natural resources and to secure high techniques for waste recycling. The purpose of this study was also to solve fundamentally secondary environmental pollution. The results revealed that the chemical components of sewage sludge ash are mainly $SiO_2\;and\;Al_2O_3$ which are similar to the components of pozzolan. Also, it was identified that sewage sludge ash can be utilized as a hardened specimen with an alkali activated pozzolan reaction. Considering the possibility of appropriate strength development and the advantage of drying shrinkage, compared with that of cement, it was believed that sewage sludge ash can demonstrate a function as a substitute for cement given.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.255-264
• /
• 2022

The active ingredients of Napttegi Kong(GML, Glycine max landrace), a type of native rare soybeans, were identified, and an ultrasonic extraction method was introduced as an eco-friendly extraction method. Through the component analysis of the Napttegi Kong extract, the epicatechin, which was not found in conventional soybeans, was identified. For effective extraction using ultrasonic, the main extraction conditions were optimized using the response surface analysis method. Through the Box-Behnken design process, 15 experiments were conducted with the extraction temperature, the ratio of extraction solvent/solution, and extraction time as key independent variables. A quadratic regression equation for the two dependent variables, epicatechin content and total isoflavone content, was derived, and the coefficients of determination were found to be high as R² = 0.9939 and R² = 0.9844, respectively, confirming that the correlation showed high significance. The extraction conditions satisfying the maximum expectations of these two dependent variables were predicted. to be 40.4℃ of extraction temperature, 19.3 times of extraction solvent/solution, and 91 sec of extraction time. The expected value and the actual experimental value of the epikatechin content and the total isoflavone content were similar, so it was confirmed that this experimental method is a highly reliable optimization model.

• Applied Chemistry for Engineering
• /
• v.35 no.1
• /
• pp.8-15
• /
• 2024

In this study, nitrogen plasma treatment was performed in 5, 10, and 15 minutes to improve the tetracycline adsorption performance of activated carbon. All nitrogen plasma-treated activated carbons showed improved tetracycline adsorption compared to untreated activated carbons. The nitrogen functional groups in activated carbon lead to chemisorption with tetracycline via π-π interactions and hydrogen bonding. In particular, in the nitrogen plasma treatment at 80 W and 50 kHz, the activated carbon treated for 10 minutes had the best adsorption performance. At this time, the nitrogen content on the surface of the activated carbon was 2.03% and the specific surface area increased to 1,483 m²/g. As a result, nitrogen plasma treatment of activated carbon improved its physical and chemical adsorption capabilities. In addition, since the adsorption experimental results were in good agreement with the Langmuir isotherm and pseudo-second order model, it was determined that the adsorption of tetracycline on the nitrogen plasma-treated activated carbon was dominated by chemical adsorption through a monolayer. As a result, nitrogen plasma-treated activated carbon can be used as an adsorbent to efficiently remove tetracycline from water due to the synergistic effect of physical adsorption and proactive chemical adsorption.

• Korean Journal of Plant Resources
• /
• v.36 no.5
• /
• pp.517-526
• /
• 2023

The harvest time of the late-ripening 'Fuji' apple (Malus × domestica) is variable, depending on the coloration of the fruit skin. Ethephon, a plant growth regulator, promotes the ethylene production and induces physiological responses associated with fruit maturation in climacteric fruit crops, such as apples. This study aimed to investigate the effect of ethephon treatment on fruit characteristics after fruit enlargement, with the objective of proposing an economical and stable harvest control method for 'Fuji'/M.26 apples. Fruit characteristics were assessed at 10-days intervals following the application of 100 mg/L ethephon and mixture of 100 mg/L ethephon and 0.5% CaCl₂ at 145 days after full bloom (DAFB). Starch contents of ethephon-treated (ET) and ethephon with CaCl₂-treated (EC) apples began to decrease from 155 DAFB, and the starch contents of ET and EC at 10 days before harvest were similar to those of control at harvest time. Red coloration of fruit skin in EC was lower compared to ET but higher than control. The average fruit firmness was low in ET, while the control and EC exhibited similar levels of firmness. Fruit sugar acid ratios did not show significant differences between treatments. However, the titratable acidity of EC was significantly lower than that of the control at 10 days before harvest. Moreover, fruit sugar acid ratio of ET and EC at 10 days before harvest in 2021 was similar to their sugar acid ratio at harvest time. Therefore, it was thought that fruit maturation and skin coloration could be accelerated by 10 days from the harvest time through the combined treatment of 100 mg/L ethephon and 0.5% CaCl₂ at the end of fruit enlargement in 'Fuji'/M.26.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.223-234
• /
• 2016

This study aimed to the adsorption-removal of high- radioactive iodide (I) contained in the initially generated high-radioactive seawater waste (HSW), with the use of AgX (Ag-impregnated X zeolite). Adsorption of I by AgX (hereafter denoted as AgX-I adsorption) was increased by increasing the Ag-impregnated concentration in AgX, and its concentration was suitable at about 30 wt%. Because of AgCl precipitation by chloride ions contained in seawater waste, the leaching yields of Ag from AgX (Ag-impregnated concentration : about 30~35 wt%) was less than those in distilled water (< 1 mg/L). AgX-I adsorption was above 99% in the initial iodide concentration ($C_i$) of 0.01~10 mg/L at m/V (ratio of weight of adsorbent to solution volume)=2.5 g/L. This shows that efficient removal of I is possible. AgX-I adsorption was found to be more effective in distilled water than in seawater waste, and the influence of solution temperature was insignificant. Ag-I adsorption was better described by a Freundlich isotherm rather than a Langmuir isotherm. AgX-I adsorption kinetics can be expressed by a pseudo-second order rate equation. The adsorption rate constants ($k_2$) decreased by increasing $C_i$, and conversely increased by increasing the ratio of m/V and the solution temperature. This time, the activation energy of AgX-I adsorption was about 6.3 kJ/mol. This suggests that AgX-I adsorption is dominated by physical adsorption with weaker bonds. The evaluation of thermodynamic parameters (a negative Gibbs free energy and a positive Enthalpy) indicates that AgX-I adsorption is a spontaneous reaction (forward reaction), and an endothermic reaction indicating that higher temperatures are favored.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.2
• /
• pp.33-44
• /
• 2012

Transparent exopolymer particles (TEP) are formed by aggregation of polysaccharide products excreted by phytoplankton and have sticky character like gel. They play important role in the production of marine snow in water column. To study the distribution pattern of TEP concentration and its role in carbon cycle in the surface ocean, we measured pH, Total alkalinity (TA), and chlorophyll-a in addition to physical characteristics of seawater within the surface water column. TEP concentrations ranged from nearly undetectable values to $338{\mu}g\;Xeq\;l^{-1}$. They were considerably lower than previously reported values from costal sites, but showed similar values observed in other oceanic region during phytoplankton bloom periods. The spatial distribution of TEP concentrations were similar to those of chlorophyll-a, which indicate that the production of TEP were closely related to phytoplankton. Calculated total dissolved inorganic carbon ($TCO_2$) from the pH and TA was normalized to 35 psu of salinity ($NTCO_2$) and showed negative linear relationship with temperature. Biological drawdown of $NTCO_2$ ($NTCO_{2bio}$) was estimated from the difference between theoretical $NTCO_2$ values and observed $NTCO_2$. In the warm region located south of $40^{\circ}N$ along the $132.5^{\circ}N$ meridional lines, $NTCO_{2bio}$ showed negative value and TEP concentrations were high. This suggested that negative $NTCO_{2bio}$ may be attributed to the biological processes. At the stations located between 44 and $46^{\circ}N$, TEP concentrations showed high concentration at the chlorophyll-a maximum layer within the water column while they showed low concentration in the surface layer. Carbon content of TEP constituted about 40% of $NTCO_{2bio}$ at the chlorophylla maximum layer. In this study, we could not observe any positive and negative relationship between TEP concentration and $NTCO_2$ or pH. It is obvious that we should consider the importance of TEP in the biological carbon cycling processes within surface layer.

• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.521-533
• /
• 2013

This study was initiated to evaluate the applicability of Si slag as an adsorbent via investigation of the main properties of Si slag as an adsorbent aw well as characterization of adsorption features between aqueous arsenic and Si slag. The specific surface area of Si slag was measured to be 6.71 $m^2/g$ which seems to be slightly higher than those of other slags, but relatively lower than those of iron (oxyhydr)oxides extensively used for arsenic controlling processes. The point of zero salt effect (PZSE) of Si slag determined by potentiometric titration appeared to be comparatively high (7.3), indicating the Si slag may be favorably used for adsorption of arsenic which predominantly exists as an oxy-anions. The results of adsorption isotherm indicate that regardless of arsenic species, Langmuir-type isotherm is the most suitable to simulate the adsorption of arsenic onto Si slag. With regard to pH-dependence of arsenic adsorption, the adsorption maxima of arsenite was centered at pH 7, and the adsorption was remarkably decreased in the other pH conditions. In the case of arsenate, on the other hand, the adsorption was highest at the lowest pH (4.0) and then gradually decreased with the increase of pH. Based on the results of kinetic experiments, it is likely that the adsorption of arsenite approached equilibrium within 2 hr, but it took about 8 hr for arsenate adsorption to be equilibrated. In addition, the Pseudo second order was evaluated to be most consistent with the empirical data of arsenic adsorption onto Si slag in this study. Under identical conditions, the affinity of arsenate onto Si slag was estimated to be nearly 6 times higher than that of arsenite.

• Korean Journal of Food Science and Technology
• /
• v.44 no.5
• /
• pp.568-576
• /
• 2012

Baksulgi with various sugar substitutes was prepared and characterized for physicochemical and sensory qualities. The 10% sugar in a control baksulgi was replaced with 16.1% glucose, 13.3% erythritol, 10.2% xylitol, 0.2% stevioside (enzymatically modified stevia 100%), 0.05% aspartame, or 1.2% sucralose. Instrumental and sensory analyses indicated that the baksulgi with glucose was significantly different in color from the others, which was attributed to high susceptibility to browning reaction of the glucose. Baksulgi with aspartame showed significantly lower pH than that of control baksulgi, suggesting that the aspartame might have been hydrolyzed into its constituent amino acids under elevated steaming temperature. A sensory evaluation revealed that baksulgi with sucralose or xylitol was comparable to the control baksulgi in all sensory characteristics. However, the baksulgi with sucralose showed appreciably increased hardness with increased storage time at $4^{\circ}C$, partially due to the anhygroscopic property of sucralose.