• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.67-70
• /
• 2014

본 논문은 TTA 에서 제정된 "HTML5 기반 스마트 TV 플랫폼" 표준(TTAK.KO-07.0111/R1)에 따라 개발된 스마트 TV 수신기가 표준의 기술 요구사항을 준수하여 적합하게 구현되었는지를 검증하기 위한 표준 적합성 시험환경을 소개한다. 적합성 시험을 위한 시험 기준과 수행절차, 판정 기준 등을 정의하고 있는 "HTML5 기반 스마트 TV 플랫폼 수신기 적합성 시험" 표준(TTAK.KO-07.0119)에 따라 200 여개의 테스트 케이스가 개발되었으며 이들은 스마트 TV 수신기에서 직접 동작하면서 수신기의 기능을 검증하고 결과를 판단하게 된다. 테스트 케이스를 실제 방송환경과 유사한 조건에서 실행하기 위하여 지상파, 케이블, IPTV, 위성 등 다양한 방송 헤드앤드를 활용한 방송 송출 서버를 구현하였으며, 시험에 관련된 정보를 처리하고 실제 시험의 수행 및 그 결과를 관리하는 적합성 시험 관리 시스템을 개발하였다. 그리고 테스트 케이스 앱을 호스팅하는 웹서버, VOD 콘텐츠를 위한 스트리밍 서버 등의 장비를 운용하여 적합성 시험을 위한 전반적인 환경을 구축하였다. 또한 본 논문에서는 구축된 시험 환경에서 표준 기반으로 개발된 참조 수신기를 대상으로 적합성 시험을 수행한 사례를 통해 시험환경의 유효성을 확인하고 향후 적합성 시험환경의 추진 방향을 제시한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.77-84
• /
• 2006

For a fire cause judgement this paper describes the heating characteristics of electric bare wire melted by AC current. The cower wires prepared for the experiment were 1.2[mm], 1.6[mm], and 2.0[mm] in diameter. Through the cross section analysis(CSA), it was confirmed that the dendrite structure grew at the angle of about 40[$^{\circ}$] or 60[$^{\circ}$] when the fusing current was applied to the wires. The larger the fusing current is, the more decreased the growth angle of the dendrite structure is. It was confirmed that the dendrite structure was arranged like the columnar structure.

• Journal of Korea Multimedia Society
• /
• v.4 no.6
• /
• pp.500-509
• /
• 2001

Image compression based on Wavelet gives much better quality than JPEG based on DCT, but suffers from ringing or blurring effects around edges as the compression is increased. In this paper, we proposed enhanced image compression by pre-processing wavelet coefficients. This pre-processing is performed by making a low threshold and enhanced by zerotree scan method when subband's zerotrees are established. It might increase significants coefficient by means of modifying the threshold and reflect on the orientation of subbands. Some experimental results show our method is more efficient than the conventional methods, JPEG. And then the developed coding scheme improves the quality of images and visually shows more pleasing results for most practical images.

• Fire Science and Engineering
• /
• v.22 no.1
• /
• pp.68-75
• /
• 2008

In this paper, we introduce a fire-detection system which is robust to light sources and environment changing. We can decide the threshold values that classify the regions between a fire flame and light sources by analyzing them in RGB color space. But we could not discriminate quasi-flame region from fire flame region with the value. The difference of mean-histogram technique make it possible to extract flame region more efficient because fire flame is continuously changing after it occurs. In order to validate real fire, this paper uses regional compactness in the end of process. Computer simulation show that proposed method make more robust to light sources and environment changing.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2017.11a
• /
• pp.289-303
• /
• 2017

기술력평가는 기술사업화 주체가 기술을 사용하여 수익을 창출할 수 있는 능력을 평가하기 위한 것으로, 국내 기술성 평가기관들이 각자 독자적인 평가 모형을 활용하여 평가를 수행해오고 있다. 특히 최근에 개발된 해양 및 수산 산업 분야의 기술력 평가모형은 타 산업 대비 열악한 기술개발 환경과 연구개발 성과를 대상으로 평가를 수행해오면서 기존의 평가체계 내에서는 많은 평가대상 기술들이 부적합 판정을 받아오고 있었다. 이러한 것은 기존 평가체계가 타 산업에서 활용되고 있는 공통적인 평가지표와 평가척도를 유사 또는 동일하게 사용하면서 발생되는 문제점으로 인식되었고, 또한 해양 및 수산 산업의 특수성이 반영되지 않은 평가체계에서 비롯된 것으로 파악되고 있다. 따라서 본 연구를 통해 기존 평가체계를 해양수산 산업의 특수성을 반영할 수 있는 평가체계로 개선하여 해당 산업에 특화될 수 있는 평가체계를 새롭게 제안하고자 하며, 이를 위해서 기존 평가지표의 개선, 시뮬레이션 기반의 평가척도의 재설정 방법과 평가등급 산출방법에 대한 새로운 제안을 하고자 한다. 마지막으로 개선된 기술력평가 체계를 활용하여 시범사례평가를 수행하여 기존 평가체계를 통한 평가결과의 Gap분석을 수행하고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.371-384
• /
• 2001

In these days, it is continuously increased to the intrusion of system in internet environment. The methods of intrusion detection can be largely classified into anomaly detection and misuse detection. The former uses statistical methods, features selection method in order to detect intrusion, the latter uses conditional probability, expert system, state transition analysis, pattern matching. The existing studies for IDS(intrusion detection system) use combined methods. In this paper, we propose a new intrusion detection algorithm combined both state transition analysis and association mining techniques. For the intrusion detection, the first step is generated state table for transmitted commands through the network. This method is similar to the existing state transition analysis. The next step is decided yes or no for intrusion using the association mining technique. According to this processing steps, we present the automated generation algorithm of the penetration scenarios.

• Water for future
• /
• v.17 no.2
• /
• pp.107-112
• /
• 1984

It si presented here that in order to estimate reservoir sedimentation rate through the use of reservoir survey data of 66 irrigation reservoir in 3 major watersheds in this country, the correlation between reservoir sedimentation rate and the following factors; watershed area, trap-efficiency, watershed slope, shape factor of water shed, and reservoir deposition age in two models simple regression model and multiple regression model. Appropriatness of the proposed models have been calibrated from the survey data and as a result, it has been determined that the multiple regression model is much more accurate than the simple regression model. The annual sediment yield is correlated with watershed area and reservoir trap efficiency. It has been found that variation of the annual average sedimentation rate and the annual reservoir capacity loss rate are influenced by the trap efficiency of reservoir.

• Journal of Nutrition and Health
• /
• v.43 no.2
• /
• pp.189-196
• /
• 2010

Malnutrition has been associated with higher hospital costs, mortality, rates of complications and longer length of hospital stay. Several nutritional screening tools have been developed to identify patients with malnutrition risk. However, many of those require much time and labor to administer and may not be applicable to a Korean population. Therefore, the aim of this study was to develop nutritional screening tool for Korean inpatients. Then we compare nutritional screening tools that developed and previously described. Seven hundred sixty-four patients at hospital admission were screened nutritional status and classified as well nourished, malnutrition stage 1 or stage 2 by the KNNRS (Kyunghee Neo Nutrition Risk Screening), PG-SGA (Patient-Generated Subjective Global Assessment) and NRS-2002 (Nutritional Risk Screening-2002). The KNNRS, PG-SGA and NRS-2002 respectively classified 28.7%, 51.3%, 48.5% of patients as malnourished status. Compared to the PG-SGA, the KNNRS had sensitivity 60.7% (95% CI 54.2-67.0) and specificity 81.2% (95% CI 75.3-85.2). Agreement was fair between KNNRS and PG-SGA (k = 0.34). Compared to the NRS-2002, the KNNRS had sensitivity 57.8% (95% CI 53.4-60.9) and specificity 64.4% (95% CI 60.2-69.8). Agreement was poor between KNNRS and NRS-2002 (k = 0.18). These result should include that the KNNRS and PGSGA have clinical relevance and fair concordance. However the rate of malnourished patients by KNNRS were less than by PG-SGA. For more effectivity of nutritional screening and management, the criteria of KNNRS would be better revised.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.182-193
• /
• 2022

Purpose: By measuring and evaluating the risk of biodiesel through non-volatile residue (NVR) and flash point and explosion limit measurement at a specific temperature according to ASTM test standards, the risk of chemical fire causative substances is identified and a universal evaluation method By derivation and securing the risk-related data of the material, it can be used for the identification and analysis of the cause of the fire, and it can be applied to the risk assessment of other chemical substances Method: In order to measure the risk of biodiesel, it was measured using the non-volatile residue(NVR) measurement method, which measures how much flammable liquid is generated at a specific temperature. Heating was tested by applying KS M 5000: 2009 Test Method 4111. In addition, the flash point was measured using the method specified in ASTM E659-782005, and the energy supply method was measured using the constant temperature method. In addition, the explosion limit measurement was conducted in accordance with ASTM E 681-04 「Standard test method for concentration limits of flammability of chemicals(Vapors and gases)」 test standard. Result: As a result of checking the amount of combustible liquid by the non-volatile residue (NVR)measurement method, the non-volatile residue(NVR) of general diesel when left at 105±2℃ for 3 hours was about 30% (70% of volatile matter) and about 4% of biodiesel. In addition, similar results were obtained for the non-volatile residue(NVR)heating temperature of 150±2℃, 3 hours and 200±2℃ for 1 hour, and white smoke was generated at 200℃ or higher. In addition, similar values were obtained as a result of experimentally checking the explosion (combustion) limits of general diesel, general diesel containing 20% biodiesel, and 100% biodiesel. Therefore, it was confirmed that the flammability risk did not significantly affect the explosion risk. Conclusion: The results of this study suggested the risk judgment criteria for mixtures through experimental research on flammable mixtures for the purpose of securing the effectiveness, reliability, and reproducibility of the details of the criteria for determining dangerous substances in the existing Dangerous Materials Safety Management Act. It will be possible to provide reference data for the judgment criteria for flammable liquids that are regulated in the field. In addition, if the know-how for each test method is accumulated through this study, it is expected that it will be used as basic data in the research on risk assessment of dangerous substances and as a basis for research on the determination of dangerous substances.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.10-24
• /
• 2021

Purpose: The purpose of this study is to determine the dangers of biodiesel and general diesel mixtures currently used as alternative fuels by equipment (tag method and penski Marten method) and to determine the difference between flash point and combustion point (closed, open) according to test methods. It is intended to be used as a reference material for identification and evaluation of firecausing substances by confirming the risk of mixtures by comparative analysis and measurement, and establishing a risk assessment method for chemical substances. Method: Flash point test method and result treatment were tested based on ASTM and KS M mode, which are tag sealing and pen schematense test methods used as flash point and combustion point test methods for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was a test equipment that satisfies the test standards of KS M 2010 with equipment produced by TANAKA of Japan. The flash point and combustion point were measured, and the flash point according to the test method of biodiesel and general diesel mixture ( Closed, open), and the ignition point of a mixture of biodiesel and general diesel was compared and analyzed for ignition risk compared with conventional diesel. Results: Looking at the experimental results, first, as an analysis of the risk of flammability of the mixture, the flash point of a substance containing 70% biodiesel was found to be about 92℃ based on general diesel with a flash point of 64.5℃, and gasoline and biodiesel or When the biodiesel mixture was synthesized, it was confirmed that the flash point tends to decrease. In addition, the difference between the flash point and the combustion point was analyzed as about 20 ~ 30℃, and when a small amount of gasoline or methanol was mixed, the flash point was lowered, but it was confirmed that the combustion point was similar to that of the existing mixture. Conclusion: In this study, in order to secure the effectiveness of the details of the criteria for judging dangerous materials in the existing Dangerous Materials Safety Management Act, and to secure the reliability and reproducibility of the judgment of dangerous materials, we confirm the criteria for judging the risk of the mixture through an experimental study on flammable mixtures. It will be able to provide reference data for experimental criteria for flammable liquids that are regulated in the field. In addition, if this study accumulates know-how on experiment by test method, it is expected that it can be used as a basis for research on risk assessment and research on dangerous goods.