• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.367-371
• /
• 2007

Nanocomposites prepared by PP(Polypropylene) based compatibilizers modified with GMA(Glycidyl methacrylate) and HEMA(Hydroxyethyl methacrylate) were used to investigate the clay dispersion and mechanical properties of them. XRD patterns showed the improvement of dispersion through clay intercalation according to the compatibilizers and comonomer. GMA modified polypropylene gave the best mechanical properties of the nanocomposite with respect to the balance of Flexural modulus (FM) and Notched izod impact strength(IS). Compatibilizers with comonoer commonly have higher grafting yield and lower melt flow rate than those of comonomer free. And they enhanced the clay dispersion and mechanical properties of nanocomposites. Optimum ratio of monomer to comonomer for nanocomposites having better mechanical properties is about 1 to 1 ratio.

• Composites Research
• /
• v.15 no.1
• /
• pp.9-20
• /
• 2002

In this study, the design method of filament wound composite pressure tanks was established by using finite element analyses. Pressure tanks were designed with and without a load sharing metallic liner. A GUI(graphic user interface) program was developed to increase the efficiency of analyses. The replacement ratio was defined in order to replace a metal pressure tank with a composite one. Finally, the best design model that is satisfied with design requirements was suggested.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.58-58
• /
• 1994

슬립캐스팅법으로 제조한 튜브형 $\alpha$-알루미나 담체 (평균기공크기 = $0.1 \mum$)에 졸-겔 침지코팅(dipcoating) 또는 가압코팅 (pressurized coating) 법에 의하여 극미세입자 $\gamma$-AlOOH, $TiO_2, SiO_2$, 및 aluminosilicate diphasic 졸을 코팅한 후 300 ~ 500$\circ$C 에서 열처리하여 세라믹 복합막을 제조하였다. 복합막 전체에 대한 균열유무는 $N_2$ 기체투과율의 평균압력에 대한 의존성으로부터 평가하였으며, 한외여과 (ultrafiltration)에의 응용성을 규명하기 위하여 막의 재질 및 제조조건에 따른 polyethylene glycol (PEG) 수용액의 분획분자량 변화를 측정하였다. 합성 세라믹 복합막의 분획분자량 측정 결과 $SiO_2$의 경우 2,000 정도로 매우 우수하였으며 $\gamma-Al_2O_3, TiO_2$, 그리고 aluminosilcate 막들은 6,000 ~ 10,000 범위 값을 갖고 있었다. 또한 막의 기공크기 및 분획분자량을 제어하기 위한 방법으로서 $TiO_2$ 복합막을 300 ~ 700$\circ$C 에서 열처리하였으며 이들에 대한 분획분자량 변화를 비교 분석하였다.

• Journal of Digital Convergence
• /
• v.13 no.11
• /
• pp.461-470
• /
• 2015

This study was to identify the level of perception and practice of hospital infection control among nurses at geriatric hospitals for the convergent approach. Data were collected from October 29 to November 3, 2012, using hospital Infection control questionnaire. Data analysis was performed using a t-test, ANOVA and Correlation. The mean values of hospital infection control practice were lower than that of perception, the differences were statistically significant. There were statistically significant differences in the perception on age, education, existence of guidelines for infection control, and in the practice according to the existence of guidelines. There was a statistically significant positive correlation between perceptions of hospital infection control and practice. Therefore, it is necessary to provide continual opportunities for systematic, professional, and practical education, as well as to develop relevant programs aimed at improving the capacity of hospital infection control.

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.197-203
• /
• 2015

This study was investigate difference between critical thinking ability and disposition for the development of convergence. Data were collected from Nov. 5th to 16th 2012, using critical thinking instruments. There was no statistically significant difference in critical thinking ability according to scholastic standards and problem-based learning classes but difference according to level of education(senior students were higher than the other grades), clinical practice education and completion of critical thinking subject. There was no statistically significant difference in critical thinking disposition according to anything. Upon examining the correlation between critical thinking ability and disposition, it was significant, although small. Therefore we should separate for evaluation into two parts; critical thinking ability and disposition.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.537-544
• /
• 2016

This study was to investigate their relevance between oral health behaviors and number of remaining teeth of the elderly welfare recipients through the fluoride and scaling of the business. Researcher collected 660 subjects over 60 elderly welfare recipients investigated self-administered survey and use denture and number of remaining teeth though oral examination. Increasingly age number of teeth remaining reduced, there is a difference on the number of remaining teeth according to gender, age, the use of oral hygiene products, self diagnosis oral condition, brushing after lunch and showed significant difference(p<0.05). The remaining number of teeth can be prevented by attention and efforts of subjects. Therefore, we investigated convergent effects of oral health behaviors on number of remaining teeth of the elderly, I hope that oral health care program continually provides expansion of preventive treatment and to maintain the provision of health care about vulnerable group.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.39-44
• /
• 2002

In this paper, in order to improve the performance of TCP short traffic application services in wireless Internet environments, the Split-ACKs (SPACK) scheme is proposed. In wireless networks, unlike wired networks, packet losses will occur more often due to high bit error rates. Therefore, each packet loss over wireless lints results in congestion control procedure of TCP being invoked at the source. This causes severe end-to-end Performance degradation of TCP. In this paper, to alleviate the TCP Performance, the SPACK method, split acknowledgement Packets in the base station, is proposed. Using computer simulation, the performance of TCP using SPACK is analysed and shows better performance than traditional TCP Protocol.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.509-516
• /
• 2005

For the purpose of comparing the bond strengths of compomers to composite resin, composite Z250, and two polyacid modified composite resin, Dyract AP and F2000, were selected and investigated using universal testing machine for measuring the shear bond strengths. Additionally, the failure modes were examined by observing the fractured surfaces of each specimen. The following results were obtained. 1. The shear bond strength of Dyract AP to Z250 were higher than those of F2000, but there was no statistically significant difference between group 1 and group 3(p>0.05), and groups using fresh compomers showed higher bond strength than those using aged compomers(p<0.05). 2. After measuring the shear bond strength of each group, it was highest in group 5 and was lowest in group 9(p<0.05). 3. Although there was no statistically significant difference, groups treated with thermocycling showed lower bond strengths than those of non-thermocycling groups. 4. Overall compomer/composite resin failures were adhesive. Cohesive failures occurred mainly in groups using bonding agent. Based on these results, the application of a bonding agent on fresh polyacid-modified resin composite increases the bond strength between polyacid-modified resin composite and composite resin. Additionally, the surface of aged polyacid-modified resin composite has to be roughened mechanically and a bonding agent has to be used in combination with composite resin.

• Composites Research
• /
• v.24 no.1
• /
• pp.24-30
• /
• 2011

Low-velocity impact can cause various damages which are mostly hidden inside the laminates or occur in the opposite side. Thus, these damages cannot be easily detected by visual inspection or conventional NDT systems. And if they occurred between the scheduled NDT periods, the possibilities of extensive damages or structural failure can be higher. Due to these reasons, the built-in NDT systems such as real-time impact monitoring system are required in the near future. In this paper, we studied the impact monitoring system consist of impact location detection and damage assessment techniques for composite flat and stiffened panel. In order to acquire the impact-induced acoustic signals, four multiplexed FBG sensors and high-speed FBG interrogator were used. And for development of the impact and damage occurrence detections, the neural networks and wavelet transforms were adopted. Finally, these algorithms were embodied using MATLAB and LabVIEW software for the user-friendly interface.

• Composites Research
• /
• v.26 no.4
• /
• pp.223-229
• /
• 2013

Hybrid composite strut tower was designed to prevent permanent deformation of upper mount by the impact from the uneven road. When exceeding energy absorption capacity of tire and suspension systems, residual impact is delivered to upper mount. Especially, in case of using high-rigidity suspension system for high driving performance, the conventional strut tower can be easily deformed due to reduction of energy absorption capacity of suspension systems. In this study, optimal design of hybrid composite strut tower which made of back-up metal and carbon fiber reinforced composite was suggested by using finite element analysis, and low velocity impact test was performed to investigate their dynamic characteristics. Also, 3D measuring and ultra c-scanning methods were carried out to diagnose damages in the strut towers.