• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.115-120
• /
• 2003

Changes in polyphenol, free sugar, and organic acid concentrations and their antioxidative activities in Korean pear during storage were investigated. The antioxidant activity of polyphenols was evaluated. Polyphenol concentration in different parts of pear, peel, pulp and core, reached 25.7%. pH decreased while concentrations of free sugars, including fructose, glucose, and sucrose, increased during storage. Four organic acids, citric malic, succinic, and fumaric acids, were determined. Succinic acid was the major organic acid in the pulp and decreased after 5 month of storage. The antioxidative of polyphenol fractions I, II, and III on cottonseed, linseed, and fish oils were higher than those of the control group.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.238-238
• /
• 2010

최근 전자산업의 발전은 형상 면에서 경박 단소화로 급속하게 진행되고 있으며, 전자소자 내부에서의 배선재료로 사용되고 있는 알루미늄(Al) 박막의 두께 역시 얇아지고 있다. 두께가 20 nm 이하로 작은 극박막 범위에서 박막의 두께 증가에 따라 전기가 잘 흐르기 시작하는 박막의 최소두께로 정의 되는 유착두께를 실시간으로 측정하는 방법을 구현하고 임의의 금속박막과 기판의 조합에 있어서 각각의 재료에 대한 유착두께를 제공함으로써 향후 미세전자소자의 제작시 배선 재료의 선택에 대한 기초자료를 축적할 수 있다. 또한 금속박막의 증착공정 직전에 기판을 표면처리 하여 기판을 활성화시킬 때 표면처리가 박막의 유착두께에 미치는 영향에 대해 박막의 미세구조 변화 관점에서 연구함으로써 여러 가지 금속박막에 대한 유착두께를 줄일 수 있는 방법을 도출 할 수 있다. 본 연구에서는 유리 기판 위에 사진 식각 공정으로 패턴을 형성하고 패턴이 형성된 유리 기판은 스퍼터에 연결된 4 point probe에 구리 도선으로 연결한 후 DC 마그네트론 스퍼터법으로 Al을 증착하면서 실시간으로 시간에 따른 전기저항을 측정을 하였다. 이때 스퍼터 내부 진공도는 $4.6\;{\times}\;10^{-5}\;torr$ 까지 낮춰준 후 Al을 증착 할 때 진공도는 $1.1\;{\times}\;10^{-2}\;torr$로 맞춰주고 Ar 가스를 20 sccm 넣어준다. 1초 간격으로 전기저항을 측정한 결과 25초대에 전기저항이 급격히 감소하였으며 이때 Al 박막의 두께는 $120{\AA}$ 이고 이 두께에서부터 전류의 흐름이 좋은 것을 알 수 있다. 박막 두께에 따른 특성을 알기위해 UV 영역의 빛을 사용하는 광전자 분광기(Photoelectron Spectrometer)를 이용해 일함수를 측정하였다. Al 의 일반적인 일함수는 4.28 eV 이며, 두께가 $120{\AA}$일 때의 일함수는 4.2 eV로 거의 비슷한 값을 얻었다. 전류가 잘 흐르기 전인 12초대에서 두께가 $60{\AA}$일 때 일함수는 4.00 eV 이고 전류가 흐르기 시작한 후 50초대에서 Al 박막 두께가 $200{\AA}$ 일 때 일함수는 4.28 eV 로 일반적인 Al의 일함수와 같은 값을 얻을 수 있었다. 광전자 분광기술은 전자소자에서 중요한 전자의 성능예측에 도움을 줄 수 있으며 물질의 표면에서 더욱 다양한 정보를 얻을 수 있다. 또한 실시간 전기저항 측정을 통한 금속박막의 전기전도 특성과 미세구조에 대한 기초 자료를 제공함으로써 신기술 발전에 공헌할 것이다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.3
• /
• pp.91-96
• /
• 2023

To verify the quality of bubbles during the use of quartz glass crucibles (QC), an appropriate accelerated testing method was proposed. The bubble state of discarded waste crucibles obtained from actual Czochralski (Cz) processes was analyzed, and optimal heat treatment conditions were suggested by varying temperature, pressure, and time using the QC test piece. By subjecting the samples to heat treatment at 1450℃, 0.4 Torr, and 40 hours, it was possible to control the bubble size and density to a similar level as those generated in the actual Cz process. In particular, by selecting a relatively lower pressure of 0.4 Torr compared to the typical range of 10~20 Torr applied in the Cz process, the time required for accelerated bubble formation testing could be reduced. However, it was determined that increasing the heat treatment temperature to 1550℃ led to the phenomenon of Ostwald ripening, resulting in larger bubbles and a rapid decrease in density. Therefore, it was concluded that it was not a suitable condition for the desired b ake test.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.30-42
• /
• 2022

Due to the increase in construction of tunnels, the burdens of maintenance works for tunnel structures have been increasing in Korea. In addition, the increase of traffic volume and aging of materials also threatens the safety of tunnel facilities, therefore, maintenance costs are expected to increase significantly in the future. Accordingly, automated condition assessment technologies like image-based tunnel scanning system for inspection and diagnosis of tunnel facilities have been proposed. For image-based tunnel scanning system, it is key to create a planar image through stitching of multiple images captured by tunnel scanning system. In this study, performance of feature-based stitching algorithms suitable for stitching tunnel scanning images was evaluated. In order to find a suitable algorithm SIFT, ORB, and BRISK are compared. The performance of the proposed algorithm was determined by the number of feature extraction, calculation speed, accuracy of feature matching, and image stitching result. As for stitching performance, SIFT algorithm was the best in all parts of tunnel image. ORB and BRISK also showed satisfactory performance and short calculation time. SIFT can be used to generate precise planar images. ORB and BRISK also showed satisfactory stitching results, confirming the possibility of being used when real-time stitching is required.

• Annual Conference of KIPS
• /
• 2002.11c
• /
• pp.2119-2122
• /
• 2002

기업의 비즈니스 프로세스가 복잡, 다양해짐에 따라, 현재 운영 시스템에 대한 급격한 기술적 변화를 수용하고 이를 조직적 측면의 기업 프로세스로 적용하기 위해 레가시 시스템의 현대화가 요구된다. 따라서, 현재의 기업들은 다양한 사용자들이 각자 그들의 관점에서 필요한 비즈니스 요구들을 웹 상에서 처리시킬 수 있도록 J2EE, .NET 등으로 대표되는 컴포넌트 및 웹 서비스 기술을 적용한 새로운 e-business 환경을 수용해야만 한다. 하지만, 기업 조직의 중요한 지식과 프로세스들을 처리하는 시스템들은 대부분 과거(Legacy)의 기술에 의해 개발되어졌으며, 이러한 시스템들을 새로운 비즈니스 환경에 적용하기에는 웹 환경을 위한 분산 아키텍쳐의 결여와 개방성과 표준화 미흡으로 시스템의 유지보수에 많은 어려움을 가진다. 또한, 방법론 차원에서 재공학의 절차와 기법을 체계적으로 정의하고 지원하기 위한 노력이 매우 부족한 실정이다. 본 논문에서는 레거시 시스템을 새로운 시스템 환경으로의 변환 및 통합을 위한 재공학 방법론 개발을 목적으로 프로그램 분석 활동을 설명한다. 본 논문에서 개발하고자 하는 방법론은 다양한 추상화 수준에서 역공학 정보를 복구하고, 컴포넌트화 단계를 통해 새로운 시스템으로 진화할 수 있는 절차 및 기법들을 제공한다. 레거시 시스템 컴포넌트화 방법론은 변환계획 단계, 역공학 단계, 컴포넌트화 단계, 인도 단계의 4 단계로 구성되어 있으며, 본 논문에서는 전체 단계 중 가장 기초가 되고 중요한 단계인 역공학 단계에 초점을 두고 프로그램 분석을 위한 절차 및 과정의 주요 지침들을 제시한다.0보다 유의적으로 우수하였으며, 맛, 다즙성 및 전체적인 기호도는 TMR-0 및 TMR-1 사이에 유의성이 없었다(p<0.05).能性)을 알아보고자 본(本) 실험(實驗)을 실시(實施)한 결과(結果), 유의성(有意性) 있는 결과(結果)를 얻었기에 보고(報告)하는 바이다.또한 이들 상피세포(上皮細胞)들을 투과전자현미경적(透過電子顯微鏡的)으로 관찰(觀察)하였을 때 초미세구조(超微細構造)가 잘 보존(保存)되었으나 Langer-hans cell내(內)의 Birbeck granule은 유리전(遊離前) 피부상피조직내(皮膚上皮組織內)의 Langerhans cell내(內)의 Birbeck granule에 비(比)해 수적(數的)으로 현저히 감소(減少)되어 있었다. 그러나 Thy-1 양성(陽性) dendritic cell에서 볼 수 있는 dense-core 과립(顆粒)은 별변화(別變化)없이 쉽게 관찰(觀察)될 수 있었다. 조직배양(組織培養)을 한 견(犬)의 keratinocyte에 대(對)해 사람 pemphigus vulgaris의 항체(抗體)로 반응(反應)시킨 후 protein-A gold(15 nm)로 표식(標識)시킨 바 제일 바깥 상층(上層)의 keratinocyte에 있어서 세포막표면(細胞膜表面)을 따라 표식(標識)되어 세포막항원(細胞膜抗元)을 나타내었으며, 이와 같은 소견(所見)으로 미루어 정상피부(正常皮膚) 중층편평상피세포(重層扁平上皮細胞)에서도 동일(同一)한 소견(所見)을 관찰(觀察)할 수 있다고 본다.al remnants, Resorption of fetus로 관찰된 것이다. Fetal death는 수정후

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.6
• /
• pp.120-130
• /
• 2013

A study was conducted for the performance characteristics of methane taking recently the limelight in the world as a next-generation propellant, with the survey for state of the art in the development of methane/oxygen rocket engine being accompanied. Liquid methane as a rocket fuel has the favorable characteristics such as non-toxic, low cost, regenerative cooling capability, and potential for in-situ resource utilization (ISRU). The combination of liquid methane and liquid oxygen also provides the excellent performance including high specific impulse and low system mass. For these reasons, many researches have been actively carried out on the methane/oxygen engine, nevertheless, its technology readiness level is not that high enough just yet. Therefore, it is judged that it is the time to mitigate the technical gap with the space technology of advanced countries through a swift onset of the development of methane rocket engine.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.4
• /
• pp.384-389
• /
• 2018

Cultivation techniques of proso millet (Panicum miliaceum L.) and foxtail millet (Setaria italica L.), such as sowing, weeding, and harvesting, are often not properly utilized, resulting in low productivity rates. The goal of this study was to develop cultivation techniques to increase millet productivity rates and reduce labor inputs. We evaluated the effects of different machine sowing methods compared with manual sowing methods from 2014 to 2016. The three machine sowing methods were dibbling, drilling, and broadcasting. Compared with manual sowing, the broadcasting method decreased labor times by 16.07 and $14.23hr10a^{-1}$ for proso and foxtail millets, respectively. Proso millet showed greater culm lengths at 138 and 125 cm with the broadcasting method for two years, whereas foxtail millet after three years had greater culm lengths from both the drilling and broadcasting methods. Both crops exhibited the thickest culm stems in the $3^{rd}$ year. The greatest number of seeds of the panicle were from the manual sowing method in both crops. Compared with manual sowing, broadcasting increased grain yields by 15-35% and 9.1-28% for proso and foxtail millets, respectively. Therefore, we suggest that the application of broadcasting in mechanical sowing will increase labor efficiency and yields of proso and foxtail millets.

• Clean Technology
• /
• v.20 no.4
• /
• pp.383-389
• /
• 2014

$CO_2$ absorption processes have a good potential for large scale capture of $CO_2$ but a large amount of absorbing solution has to be regenerated, undesirably increasing the consumption of energy such as sensible heat and latent heat of vaporization. In this study, a cooling crystallization process which would separate the $CO_2$-rich potassium bicarbonate crystals from $CO_2$-lean water was developed to reduce the energy penalty. Sterically hindered alkanolamine additives were used to enhance the $CO_2$ removal efficiency and their antisolvent effect on the crystallization was found in a continuous cooling crystallizer. The production yields of crystals were increased in the sequence of 2-amino-2-methyl-1-propanol (AMP) < 2-amino-2-methyl-1,3-propanediol (AMPD) < 2-amino-2-hydroxymethyl-1,3-propanediol (AHPD), which are related to the number of hydroxyl groups in the additive molecules. Using $^{13}carbon$ nuclear magnetic resonance, the additives favored the formation of bicarbonate ions by steric hindrance effect and increased the supersaturation of $KHCO_3$. It is shown that the additives increase the mean size of crystals and crystal growth rate by increasing supersaturation. The additives are promising for enhancing the $CO_2$ removal efficiency and reducing the regeneration energy cost of $CO_2$ absorbing solution by promoting $KHCO_3$ crystallization.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.2
• /
• pp.43-50
• /
• 2009

Although thin PCBs(Printed Circuit Boards) have recently been required for high density interconnection, high electrical performance, and low manufacturing cost, the utilization of thin PCBs is severely limited by warpage and reliability issues. Warpage of the thin PCB leads to failure in solder-joints and chip. The $B^2it$(Buried Bump Interconnection Technology) for PCB has been developed to achieve a competitive manufacturing price. In this study, chip temperature, package warpage, chip stress and solder-joints stress characteristics of the PCB prepared with $B^2it$ process have been calculated using thermo-mechanical coupled analysis by the FEM(Finite Element Method). FEM computation was carried out with the variations in bump shapes and kinds of materials under 1.5W power of chip and constant convection heat transfer. The results show that chip temperature distribution reached more quickly steady-state status with PCB prepared with $B^2it$ process than PCB prepared with conventional via interconnection structure. Although $B^2it$ structures are effective on low package warpage and chip stress, with high strength bump materials arc disadvantage for low stress of solder-joints. Therefore, it is recommended that optimized bump shapes and materials in PCB design should be considered in terms of reliability characteristics in the packaging level.

• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.242-249
• /
• 1997

Environmental control operations have been considerably contributed to the reduction of labor cost in both plastic film and glass greenhouses since government supported projects were begun. However, some problems are still remaining on the optimal environmental control and excessive operation due to an inflexible software regulating ventilation gear - reducers. The unadjustable software caused the damage of ventilation system, resulting in heat stresses of crops. This study was performed to develop a ventilation software controlling the vent opening level, opening sequence, based on the wind direction, and control interval according to the difference between ambient and set- up temperatures. The software included a beeper system alarming urgent cases, while a manager was remote from the greenhouse. A compatible hardware with the software was also developed by using a low-cost diffused DSP controller.