• Korean Journal of Food Science and Technology
• /
• 제31권3호
• /
• pp.644-650
• /
• 1999

A normal and a waxy hull-less barley with similar ${\beta}-glucan$ contents were selected, and the effects of ${\beta}-glucans$ on rheological and pasting properties were investigated by using their flour extracts and isolated ${\beta}-glucan$ gum materials. ${\beta}-Glucans$ in the barley cultivars were extracted in a crude form with alkaline extraction, and the waxy hull-less barley produced more ${\beta}-glucan$ gum yield. The waxy barley also showed higher viscosities of water and alkaline flour extracts, compared to the normal barley. Both normal and waxy barley ${\beta}-glucan$ gums exhibited pseudoplastic flow behavior, and increasing ${\beta}-glucan$ concentration increased viscosity in a similar manner. The normal barley flour had a higher amylograph peak viscosity than did waxy barley flour. On the other hand, waxy barley flour with treatment of $HgCl_2$ demonstrated considerably higher increase in peak viscosity. Pasting characteristics of normal and waxy barley starches in the presence of ${\beta}-glucan$ gum solutions were tested using a rapid visco-analyzer (RVA). ${\beta}-Glucan$ gums increased the pasting viscosities of the barley starches, and the synergistic increase in viscosity appeared to be higher in the normal barley starch.

• Korean Journal of Poultry Science
• /
• 제34권3호
• /
• pp.187-196
• /
• 2007

This experiment was conducted to investigate the effect of dietary single or mixed supplementation of plant extract, fermented medicinal plants and Lactobacillus on performance, nutrient availability, blood characteristics, cecal microflora and intestinal digestive enzymes activity in broiler chickens and to prove the possibility of plant derived compounds and Lactobacillus as an antibiotic growth promoter alternative. A total of eight hundred forty, 1-d-old male broiler chicks (Ross strain) were randomly divided into 7 groups with 4 replicates of 30 birds each. The treatments were NC (antibiotic-free diet), PC (basal diet with 0.05% antibiotics and 0.03% anticoccidials), PE (basal diet with 0.1% plant extract), FMP (basal diet with 0.1% fermented medicinal plants), LB (basal diet with 0.1% probiotics), PE+LB (basal diet with 0.1% plant extract and 0.1% probiotics) and FMP+LB (basal diet with 0.1% fermented medicinal plants and 0.1% probiotics). The final body weight, body weight gain and feed conversion rate in all treated groups tended to be improved or significantly improved as compared to those of NC (P<0.05). PE was significantly high in the final body weight, body weight gain of all treated groups (P<0.05). But the growth performance was significantly lower in all treated groups except PE than PC (P<0.05). No synergic effect in growth performance was found when plant extracts and Lactobacillus were mixed and fed to broilers. The ratio of albumin to globulin was significantly lower in all groups than NC (P<0.05). And the stress indicator (lymphocyte/heterophil ratio) of NC was significantly reduced than other treatments (P<0.05). No significant differences were observed on the numbers of cecal microbes and Lactobacillus. The number of cecal E. coli and Salmonella in FMP and LB were significantly reduced (P<0.05). The activity of intestinal digestive enzymes except to sucrase of treated groups significantly decreased compare to those of controls (P<0.05). These results suggest the possibility that plant extracts and Lactobacillus could be used as the alternative of antibiotic growth promoters by improving the performance of broiler chicks.

• Korean Journal of Plant Tissue Culture
• /
• 제25권4호
• /
• pp.257-261
• /
• 1998

The repeated subcultures of in vitro plant materials in wasabi became highly vitrified and the capacity for multiple shoot formation from the vitrified plant materials was very low. In order to improve the quality of in vitro propagated planting materials, the experiments were carried out using culture vessels capped with membrane filter(MF). When vitrified shoots were cultured on MS medium with 0.2mg/L BA in the vessels with MF or without MF for 60 days, the shoots in the vessels with MF did not vitrified. In contrast, the shoots grown in the vessels without MF vitrified at 65%. The stomates of vitrified leaves were circular and inflated, whereas those of normal leaves acclimatizated in the vessels with MF were ovate in shape. The hardened shoots were also cultured on MS media without sucrose containing 0.01mg/L IBA in vessels with(photoautotrophic culture) or without(control) MF. Sucrose was necessary for survival of the in vitro plantlets in the vessels without MF. After 20 days of culture, the shoots in the vessels without MF on the sucrose-free media turned yellow and died. But the shoots in the vessels with MF in the sucrose-free media produced a lot of roots. When shoots were cultured on MS medium with 2% sucrose containing 0.01mg/L IBA in the vessels with(photomixotrophic culture) or without(heterotrophic culture) MF, best growth occured in photomixotrophic culture.

• Journal of Powder Materials
• /
• 제21권4호
• /
• pp.266-270
• /
• 2014

Metal foams have a cellular structure consisting of a solid metal containing a large volume fraction of pores. In particular, open, penetrating pores are necessary for industrial applications such as in high temperature filters and as a support for catalysts. In this study, Fe foam with above 90% porosity and 2 millimeter pore size was successfully fabricated by a slurry coating process and the pore properties were characterized. The Fe and $Fe_2O_3$ powder mixing ratios were controlled to produce Fe foams with different pore size and porosity. First, the slurry was prepared by uniform mixing with powders, distilled water and polyvinyl alcohol(PVA). After slurry coating on the polyurethane(PU) foam, the sample was dried at $80^{\circ}C$. The PVA and PU foams were then removed by heating at $700^{\circ}C$ for 3 hours. The debinded samples were subsequently sintered at $1250^{\circ}C$ with a holding time of 3 hours under hydrogen atmosphere. The three dimensional geometries of the obtained Fe foams with an open cell structure were investigated using X-ray micro CT(computed tomography) as well as the pore morphology, size and phase. The coated amount of slurry on the PU foam were increased with $Fe_2O_3$ mixing powder ratio but the shrinkage and porosity of Fe foams were decreased with $Fe_2O_3$ mixing powder ratio.

• Journal of the Korean Geographical Society
• /
• 제36권3호
• /
• pp.329-341
• /
• 2001

The purpose of this study focused on the distribution of crimes in Cheongju City. This study emphasized the characteristics of place and spatial pattern of crime in Central Business District(CBD). The crime core areas were delineated and explained through land-use based on fieldwork and GIS analysis For this aim. the police crime data of Cheongju Dongbu(east). Seobu(west) for 1998 were collected In which 3.909 indictable or similar offenses were reported. In this study, Included climes are murder. rape, robbery. arson, theft, burglary, assault and vandalism. Because theme crimes are related with site-specific crime. As a result. land-use patterns are often related to specific type of offenses. The climes in Cheongju City were concentrated in the CBD Most crimes were assaults and thefts Crime areas can be classified by the age of the offender Around Chungang and Pungmul Market in the CBD. the offender＇s ages were 30-50 dominantly Assaults and thefts were concentrated in Songan-gil(street). which is a place teen-ages and youngsters meet frequently The result of the buffering analysis with roads, explained 40% of crime within a 30m buffer area( including both sides) of a principal road The rest of the climes mainly occurred in the vicinity of narrow streets and alleys.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제26권3호
• /
• pp.184-195
• /
• 2014

After building the dyke in Nakdong River Estuary, mixing of freshwater inflow to ocean and seawater to upstream is controlled by operating the sluice gates. Mixing and convergence of seawater and freshwater by opening the sluice gates, have a major impact on the circulation of seawater in the Nakdong River Estuary. Field measurement was carried out to study the characteristics of the estuary flow and environment of each channel of the Nakdong River Estuary. Vertical salinity distribution and residual current is different from each channel by the river discharge and topographic changes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제36권10호
• /
• pp.989-999
• /
• 2012

An ejector is a fluid transportation device that operates based on the principle that a high-pressure fluid is spouted through a driving pipe and the pressure of a low-pressure fluid is increased through exchange of momentum with a low-pressure gas. Steam-steam ejectors have been widely used for suction, mixture, and dehydration. They can be easily used in places where fluid moves and expenses are reasonable. In addition, such ejectors are a semi-permanent fluid device that requires little maintenance. In this study, we present an optimized design by analyzing what cannot be obtained through experiments in order to improve the device performance, analyze general contents of a flow by acquiring exact test data on specific and interpretative areas using more advanced experimental techniques, and identify the flow characteristics of a branch pipe by examining the validity of experiments using computer hydrodynamics simulations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제41권6호
• /
• pp.415-421
• /
• 2017

As stricter environmental regulation have led to an increase in the water treatment cost, it is necessary to quantitatively study the input power of the aeration process to improve the energy efficiency of the water treatment processes. The objective of this study is to propose the empirical correlations for the mass transfer coefficient with the gas hold-up and input power in order to investigate the mass transfer characteristics of the aeration process. It was found that as the input power increases, the mass transfer coefficient increases because of the decrease of gas hold-up and increase of Reynolds number, the penetration length, and dispersion of mixed flow. The correlations for the volumetric mass transfer coefficients with gas hold-up and input power were consistent with the experimental data, with the maximum deviation less than approximately ${\pm}10.0%$.

• Journal of the Korean Society of Safety
• /
• 제14권3호
• /
• pp.101-109
• /
• 1999

This study attempts to analyse the solid mixing in the feeder and the packing effect for pressure fluctuations in the fluidized bed. To study the mixing characteristics of solid in vibrating feeder for the stable operations of fluidized combustion, the system consisted of two groups of particles such that fine particles were located on the top of the coarse particles before vibratory mixing had started. The effects of packing materials on the pressure fluctuations in a fluidized bed were analysed by using a statistical method to interpret the behavior of fluidized bed. The experiments were carried out in a fluidized bed of 6.7cm-ID, and the experimental variables were particle sizes, of 115 to 1,015$\mu\textrm{m}$ in diameter and the multi-sized particles haying Rosin-Rammler and Gaussian distributions. The settled bed heights of particles to diameter ratios (L/D) were ranged from 0.5 to 2.0. And fluidizing of particles was carried out by air. The packing materials used were screen packing, and the properties of the pressure fluctuations in the fluidized bed were measured by a differential pressure transducer. The properties of the pressure fluctuations calculated were the mean, the standard deviation, and the major frequency of the power spectral density functions. From the characteristics of fluidizing, it was found that the standard deviation of pressure fluctuations could be effectively used to explain the fluidized phenomena, and the packing materials affected severely the properties of the pressure fluctuations. As a result, from the interpretation by spectral analysis, the effects of measuring radius of pressure fluctuations on standard deviation were constant in the case of the fluidized bed with and without packing materials. However, the effects of measuring the height of pressure fluctuations on standard deviations were linear increasing for the fluidized bed with packing materials, but were constant for the fluidized bed without packing materials at 4.5cm above the gas distributor. The major frequency of pressure fluctuations was found to be nearly independent of fluidized system. Also, the major frequency of pressure fluctuations decreased with increasing packing size, and it had maximum value at 10% of the packing amount.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.55-59
• /
• 2013

A Light Emitting Diode(LED) is a semiconductor device which converts electricity into light. LEDs are widely used in a field of illumination, LCD(Liquid Crystal Display) backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. In general, LEDs production does die bonding and wire bonding on board, and do silicon and phosphor dispensing to protect LED chip and improve brightness. Then lens molding process is performed using mixed liquid silicon rubber(LSR) by resin and hardener. A mixture of resin and hardener affect the optical characteristics of the LED lens. In this paper, computational design of static mixer was performed for mixing of liquid silicon. To evaluate characteristic of mixing efficiency, finite element model of static mixer was generated, and fluidic analysis was performed according to length of mixing element. Finally, optimal condition of length of mixing element was applied to static mixer from result of fluidic analysis.