• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.5
• /
• pp.101-108
• /
• 2002

A numerical simulation of an incompressible cavity flow is conducted. Two dimensional Navier-Stokes equations are integrated using staggered grid and a finite volume method with C-QUICK scheme for spatial derivatives and fully implicit scheme for the time derivatives. SIMPLE-C algorithm is employed to solve the pressure field. Computational results show that the third eddy is generated in the shear layer mode but not in the steady mode. This signifies that the third eddy plays an important role in cavity flow stability. As a means to control the flow, jet blowing is applied to a position below the cavity upstream edge. Effects of flow control parameters on the stability such as the frequency, the phase, and the velocity magnitude are reported.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.225-234
• /
• 1995

터빈익렬내부의 유동해석을 위해 비압축성 점성유동해석을 이용한 수치 해석 프로그램을 개발하였다. 지배방정식으로는 2차원의 비정상 비압축성 Navier-Stokes 방정식을 일반화된 곡선좌표계로 전환하여 암시적으로(implicitly) 반복적인 시간진행방법을 이용하여 유동해석을 하였다. 지배방정식의 각항들은 시간에 대해 1차의 정확도 그리고 영역에 대해서는 2차의 정확도, 대류항에 대해서는 3차의 정확도를 가지는 Upwind기법을 적용하였다. 특히, 실험적 접근이 매우 어려운 터빈의 정익과 회전하고 있는 동익과의 상호운동을 멀티블럭기법과 데이터 interface를 통해 보다 쉽게 해석할 수 있었다. 본 연구결과는 정익만을 계산한 타 연구자의 결과와의 비교시 매우 일치하였으며 물리적인 유동을 잘 파악할 수 있었다. 난류유동 해석을 위해서 Baldwin-Lomax 모델을 적용하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.474-482
• /
• 2007

An analysis is made for flow and rocket motion during a supersonic separation stage of an air-launching rocket(ALR) from the mother plane. Three-dimensional compressible Navier-Stokes equations are numerically solved to analyze the steady/unsteady flow fields around the rocket which is being separated from the mother plane configuration(F-4E Phantom). Simulation results clearly demonstrate the effect of shock-expansion wave interaction around both of the rocket and the mother plane. To predict the behavior of the ALR by the change of the center-of-gravity, three cases of numerical analysis are performed. As a result, a design-guideline of supersonic air-launching rockets for safe separation is proposed.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.11a
• /
• pp.127-138
• /
• 1999

In this study steady state solutions of cavity flows driven by two moving walls are studied. The north and east walls of the cavity are movable where as the remaining two walls are fixed in space. Numerical experiments for three different driving schemes for moving walls are done at two different Reynolds numbers of Re=40 and 400. The first scheme is to accelerate north and east walls simultaneously. In the second one, the north wall is started first and the east wall is accelerated later. In the third one the east wall starts first. It is usually expected that all these three cases yield the same steady state solution after sufficiently long time. However, present numerical experiments show that such a usual belief is valid only when the Reynolds number is low enough (Re=40). At higher Reynolds number (Re=400), the flow develops to three different steady states depending on the history of the boundary condition change.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.279-286
• /
• 1999

Wall-bounded 유동과 달리 자유 전단 유동은 Hyperbolic Tangent Profile을 가지고 비점성 불안정에 의해 지배된다. 따라서 자유 전단 유동에서 난류로의 천이과정은 비점성 불안정성 이론에 의해 해석되어 진다. 본 연구는 분리판(Splitter plate)에 의해 분리된 속도가 다른 자유 유속의 혼합에 의해 형성되는 혼합층에서 와류병합과정에 대한 속도비의 영향에 대하여 연구한다. 속도비는, R, $ \frac{U_1-U_2}{U_1+U_2}$ 로 정의되며, 여기서 $U_1$은 분리판 위에서의 자유 유속을 그리고 $U_2$ 는 분리판 아래에서의 자유 유속을 나타낸다. 본 연구에서 와류구조의 병합작용을 분석하기 위하여 2차원 비정상 Large-Eddy Simulation 방법을 적용하였다. 속도비의 변화에 따라 혼합층에서 불안정 Wave가 성장하게 되고, 유체는 2차원 와류구조에서 Roll-up한다. 이러한 2차원 와류구조는 주위의 다른 와류구조와 상호작용을 하게 되고 하나의 커다란 와류구조를 형성하는 것을 볼 수 있다. 혼합층에서 와류병합과정은 반복적으로 일어나는 것을 알 수 있었고, 이 결과를 이용하여 혼합층의 성장을 제어할 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.1-10
• /
• 2006

Separation motion analysis of staging system is conducted using combined analysis programs, which include unsteady aerodynamic analysis codes and dynamic motion analysis tools. In this study, the analysis is for the long-rang missile staging system. The purpose of this study is to verify the safety and reliance of the proposed staging system, and to find out the influence of angle of attack perturbation on staging. A structured parallel overset mesh called Chimera grid is used for the simulation of unsteady supersonic Euler flow solver. In addition, unsteady dynamic simulations are also performed.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.252-268
• /
• 2009

In the present study, a grid deformation technique has been incorporated into the unsteady compressible and incompressible viscous flow solvers on unstructured hybrid meshes. An algebraic method based on the basis decomposition of normal edge vector was used for the deformation of viscous elements, and a ball-vertex spring analogy was adopted for inviscid elements among several spring analogy methods due to its robustness. The present method was validated by comparing the results obtained from the grid deformation and the rigid motion of entire grids. Fish swimming motion of an NACA0012 airfoil and flapping wing motion of a generic fighter were simulated to demonstrate the robustness of the present grid deformation technique.

• Journal of computational fluids engineering
• /
• v.14 no.3
• /
• pp.33-48
• /
• 2009

In the present study, a fast grid deformation technique has been incorporated into the unsteady compressible and incompressible viscous flow solvers on unstructured hybrid meshes. An algebraic method based on the basis decomposition of normal edge vector was used for the deformation of viscous elements, and a ball-vertex spring analogy was adopted for inviscid elements among several spring analogy methods due to its robustness. The present method was validated by comparing the results obtained from the grid deformation and the rigid motion of entire grids. Fish swimming motion of an NACA0012 airfoil and flapping wing motion of a generic fighter were also simulated to demonstrate the robustness of the present grid deformation technique.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.314-320
• /
• 2017

A pressure relief valve is generally used to prevent piping systems from being broken due to high pressure gas flows. However, the sudden pressure drop caused by the pressure relief valve produces high acoustic energy which propagates in the form of compressible acoustic waves in the pipe and sometimes causes severe vibration of the pipe structure, thereby resulting in its failure. In this study, internal aerodynamic noise due to valve flow is estimated for a simple contraction-expansion pipe by combining the LES (Large-Eddy Simulation) technique with the wavenumber-frequency analysis, which allows the decomposition of fluctuating pressure into incompressible hydrodynamic pressure and compressible acoustic pressure. In order to increase the convergence, the steady Reynolds-Averaged Navier-Stokes equations are numerically solved. And then, for the unsteady flow analysis with high accuracy, the unsteady LES is performed with the steady result as the initial value. The wavenumber-frequency analysis is finally performed using the unsteady flow simulation results. The wavenumber-frequency analysis is shown to separate the compressible pressure fluctuation in the flow field from the incompressible one. This result can provide the accurate information for the source causing so-called acoustic-induced-vibration of a piping system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.37-45
• /
• 2002

A two-dimensional unsteady, inviscid flow solver has been developed for the simulation of airfoil-vortex interactions on unstructured dynamically adapted meshes. The Euler solver is based on a second-order accurate implicit time integration using a point Gauss-Seidel relaxation scheme and a dual time-step subiteration. A vertex-centered, finite-volume discretization is used in conjunction with the Roe's flux-difference splitting. An unsteady solution-adaptive dynamic mesh scheme is used by adding and deleting mesh points to take account of both spatial and temporal variations of the flow field. The effect of vortex interaction on the aeroelastic displacement of an airfoil attached to the idealized two degree-of-freedom spring system is investigated.