• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.604-604
• /
• 2012

국지성 집중호우에 따른 도심지 내수 침수 피해의 주원인으로 하수관거의 설계기준을 초과하는 강우가 침수피해의 주요 원인이며, 도심화로 인해 불투수 면적이 증가함에 따라 유출되는 시간이 짧아 저지대의 피해는 불가피하다. 2010년과 2011년에 100년 이상의 강우사상이 서울시에 연이어 나타나면서 집중호우로 인한 피해지역이 유사하게 나타났으며, 광화문 거리의 연이은 침수는 현재 서울시의 하수관거의 용량과 빗물펌프장 및 저류조 시설로 구성된 기존 수방대책의 한계점을 보이고 있다. 이에 서울시는 광화문 일대의 배수능력을 향상시키기 위하여 효자배수분구 빗물배수터널을 계획하고 있다. 일본, 미국 및 유럽 등지에서는 대심도 지하수로 시설에 대한 수리실험 및 수치 연구를 바탕으로 다양한 지하방수로가 건설되어 국지성 집중 강우에 대해 적절히 대응하고 있으나, 국내의 경우에는 대심도 지하방수로 시설에 대한 연구가 미비하여 지하방수로 설계 지침 및 기술적 자료가 부족한 실정이다. 그러므로 대심도 빗물배수터널 시설에서의 흐름특성 분석에 관한 수리실험 및 수치해석 등의 구체적인 연구가 필요하다고 판단된다. 본 연구에서는 수리모형 실험의 물질적 및 시간적 한계를 극복하기 위하여 일반적으로 3차원 유체거동의 특성분석에 많이 사용되는 Fluent 6.3 모형을 이용하여 대심도 빗물배수터널 시설의 접선식 유입구에 대한 흐름특성을 수치모의 하였다. 접선식 유입구 및 수직갱(drop shaft)에 대한 기하 모형의 격자망은 수치해석의 안정성 확보를 위하여 그림 1과 같이 6면체 격자로 구성하였다. 맨홀 내의 다상유동을 고려하기 위하여 VOF(Volume of Fluid) Scheme을 적용하였으며, 수치해석 방법으로는 비정상류, 1st order implicit method를 사용하였다. Fluent에서의 난류 흐름을 계산하는 방법에는 난류 운동에너지와 난류 에너지 소산율 $\epsilon$의 전달 방정식을 도입한 k-$\epsilon$ 난류 모형을 채택하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.251-251
• /
• 2018

도로설계기준(2012)에 따르면 노면 배수시설은 측구, 집수정, 배수관, 배수구(빗물받이, 맨홀) 등으로 구성되며 중앙분리대 배수에서 구조가 방호벽일 경우 원칙적으로 집수정과 종배수관, 횡배수관을 설치하여 노면수를 배수한다. 최근 기후변화에 따른 국지성 집중호우로 교량 배수시설의 배수능력 부족으로 교량의 노후화, 노면의 체수와 수막현상을 야기한다. 교량 설계 시, 교량의 외관은 점배수에 의한 배수불량으로 막힘부에서의 식물생육, 부식, 배수구의 오염 등으로 심미성에 악영향을 미치고 있다. 따라서 국토교통부 도로 배수시설 설계 및 관리지침에서는 기존의 집수정으로 유도하여 배수하는 점배수 형태에서 우수의 지체시간을 저감하기 위해 배수구로 즉시 배수되어 배수 효율을 증가시켜주는 선배수시설을 권장하고 있다. 그러나 선배수 구조의 일반적인 내용만을 기술하고 있으므로 보다 상세한 설계기준이 필요하다. 또한 국내에서는 교면 배수를 위한 횡배수구의 배수능력에 관한 설계 개념은 미국의 빗물받이 설계 개념을 그대로 적용하고 있어서 교량 배수시설의 배수능력 증대를 위한 수치 및 수리실험에 관한 기술적인 자료가 부족한 실정이다. 따라서 도로의 흐름해석 및 선배수를 위한 측구 횡배수관의 흐름개선에 관한 구체적인 연구가 필요한 실정이다. 본 연구에서는 배수로 전반의 유향 분석 및 횡유입관 유입부에서의 상세한 흐름해석과 통수능력을 분석하기 위해서는 수리실험을 통한 연구가 필요한 실정이다. 그러나 최적 횡배수관의 형상 및 간격 설정에 대한 수리실험의 물리적 및 시간적 한계를 극복하기 위해 Fluent 모형(Ansys Workbench 13.0)을 활용한 수치모의를 수행하여 모형의 적용성을 검토하였다. 다상유동 해석을 위해 VOF(Volume of Fluid)방법을 적용하였고, 수치해석 방법으로는 비정상류, 난류 모형으로는 standard ${\kappa}-{\varepsilon}$모형을 적용했다. 도로 형상에 따른 우수유출량을 비교 분석하기 위하여 횡경사는 2%로 고정하고 종경사를 2%로 선정하여 수치모의를 통한 배수능력을 분석하고 설계에 직접적인 적용성을 검토하였다. 횡배수관의 간격변화 및 배수공의 위치 변화 등에 따른 차집량을 분석하였으며, 개략적인 수리실험 결과와 수치모의의 차집율을 비교 및 분석하여 Fluent 모형의 적용성을 확인하였다. 또한, 횡배수관의 유입부에서의 유속 변화 및 유출부에서의 유속이 모의가 가능하므로 배수시설에서 보다 정확한 흐름 해석이 가능하여 보다 적정한 배수능력 분석이 가능할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.227-227
• /
• 2018

티롤리안 위어(Tyrolean Weir)는 유송잡물 및 유사의 영향이 비교적 높은 산악지역에 설치되는 취수구조물로 대부분 저류면적이 제한된 자류식(Run-Off River) 수력발전 및 소규모 농업용수 취수시설에 적합한 구조물이다. 티롤리안 위어는 일반적인 취수시설과 비교하여 구조물의 규모를 최소화할 수 있어 친환경적 취수구조물로 분류할 수 있다. 아직까지 국내에서는 설치사례가 없고 연구성과 또한 부족하여 적용성에 한계가 있는 것이 사실이다. 본 연구에서는 3차원 유동해석 프로그램인 FLOW-3D를 이용하여 티롤리안 위어의 월류흐름특성을 분석하고 스크린 경사와 월류수위 변화에 따른 유량계수를 산정하였다. 티롤리안 위어 스크린경사에 따른 수치모형실험을 위해 3차원 AUTO CAD 프로그램을 이용하여 위어폭 11.0m, 길이 10m 및 수로경사 2:3의 솔리드 모형을 구성하였으며, 티롤리안 위어 스크린 경사를 $0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $15^{\circ}$, $20^{\circ}$, $25^{\circ}$, $30^{\circ}$로 변화시키며 월류수심 변화에 따른 수치모형실험을 수행하였다. 금회 수치해석 분석결과 다음과 같은 결론을 얻을 수 있었다. 1) 티롤리안 위어 스크린 경사가 증가할수록 유량계수가 증가하였다. 2) 월류수심 1.4m일때 월류량의 표준편차는 0.767이며 월류수심 4.4m일때 표준편차는 9.580으로 월류수심이 증가할수록 스크린 경사에 따른 표준편차는 증가하는 것으로 확인되었다. 3) 티롤리안 위어 스크린 경사가 클수록 월류수심은 감소하고 접근수로부 유속이 증가하였으며 스크린 경사가 작을수록 월류수심은 증가하고 유속이 감소하는 경향을 확인하였다. 4) 티롤리안 위어 스크린 경사가 작고 월류수심이 클수록 광정위어와 유사한 흐름특성을 보였다.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.145-150
• /
• 2022

Dynamic contact angles have investigated by numerous researchers for understanding interfacial behavior at moving contact lines However, due to limitation of visualization techniques, previous experiments for dynamic contact angles have conducted limitedly in hydrophilic capillary tubes based on visible ray. Recently, there is continuous need for research on dynamic contact angles in hydrophobic capillary tubes on various research and industrial fields. Therefore, in this study, we measure the dynamic contact angles of water-glycerol mixture slug in hydrophobic microtubes using synchrotron X-ray imaging. Based on the visualized data, we verified the previous experimental correlations for dynamic contact angles.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.397-410
• /
• 2022

The safety of the disposal repository for high level radioactive waste should be guaranteed for a quite long period so that the precise evaluations are required. The site characteristics of the discontinuities are essential part of the safe repository design including engineered barrier and natural barrier systems. The discontinuities act like weak planes and at the same time, they act as flow paths so that their features should be investigated thoroughly. RQD (Rock Quality Designation) is one of the most widely applied characterizing methods due to its simplicity, however, modified designations have been proposed because RQD has some drawbacks, such as its directivity and dependence on the threshold length. This study aims to evaluate the applicability of the modified designations by applying them to the rock mass around KURT and to produce fundamental database that will be utilized in future studies.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.10
• /
• pp.151-163
• /
• 2006

This paper presents the interrelationship between undrained static and cyclic shear behavior. Laboratory works were performed through the undralned static and cyclic triaxial test using Nak-Dong River sand. And static triaxial test involved the triaxial extension test for comparison with cyclic shear behavior Cyclic triaxial test was performed with a variety of combination conditions of initial static shear stress $(q_{st})$ and cyclic stress $(q_{cy})$. In this result, the stress path of cyclic shear behavior was correspondent with static shear behavior passing the critical stress ratio (CSR) line because of the development of flow deformation. After that, a failure occurred according to failure line (FL) of static shear behavior. The stress path of cyclic shear behavior showed essentially the same with static shear behavior, although it appears a little different in test method.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.6
• /
• pp.403-412
• /
• 2016

As transaction and investment using technology are vitalized, the need for objective standards for the technology is increasing. Current technology value evaluation system is limited lacking reliability and objectivity. Besides the traditional evaluation methodology which are market approach, income approach and cost approach other diverse evaluation methodology such as real option method and royalty calculation method are being studied; however currently there are no dominant evaluation methodology in the market. Same value evaluation system cannot be applied between similar technologies because value of technology is relatively decided based on the target. Approaching through collective intelligence and crowd sourcing, in meaning of majority participant's decision can make objective and better result than handful of experts, suggest alternative to problems of such matter above. By grafting the four types of crowd sourcing model which are Wisdom, Voting, Funding and Creation, this paper will discuss the ways to enhance the objectivity of technology evaluation through direct evaluation utilizing expert group and the public's indirect evaluation.

• Microbiology and Biotechnology Letters
• /
• v.37 no.4
• /
• pp.377-382
• /
• 2009

Viral safety is an important prerequisite for clinical preparations of all biopharmaceuticals derived from plasma, cell lines, or tissues of human or animal origin. To ensure the safety, implementation of multiple viral clearance (inactivation and/or removal) steps has been highly recommended for manufacturing of biopharmaceuticals. Of the possible viral clearance strategies, Ultraviolet-C (UVC) irradiation has been known as an effective viral inactivating method. However it has been dismissed by biopharmaceutical industry as a result of the potential for protein damage and the difficulty in delivering uniform doses. Recently a continuous flow UVC reactor (UVivatec) was developed to provide highly efficient mixing and maximize virus exposure to the UV light. In order to investigate the effectiveness of UVivatec to inactivate viruses without causing significant protein damage, the feasibility of the UVC irradiation process was studied with a commercial therapeutic protein. Recovery yield in the optimized condition of $3,000\;J/m^2$ irradiation was more than 98%. The efficacy and robustness of the UVC reactor was evaluated with regard to the inactivation of human immunodeficiency virus (HIV), hepatitis A virus (HAV), bovine herpes virus (BHV), bovine viral diarrhea virus (BVDV), porcine parvovirus (PPV), bovine parvovirus (BPV), minute virus of mice (MVM), reovirus type 3 (REO), and bovine parainfluenza virus type 3 (BPIV). Non enveloped viruses (HAV, PPV, BPV, MVM, and REO) were completely inactivated to undetectable levels by $3,000\;J/m^2$ irradiation. Enveloped viruses such as HIV, BVDV, and BPIV were completely inactivated to undetectable levels. However BHV was incompletely inactivated with slight residual infectivity remaining even after $3,000\;J/m^2$ irradiation. The log reduction factors achieved by UVC irradiation were ${\geq}3.89$ for HIV, ${\geq}5.27$ for HAV, 5.29 for BHV, ${\geq}5.96$ for BVDV, ${\geq}4.37$ for PPV, ${\geq}3.55$ for BPV, ${\geq}3.51$ for MVM, ${\geq}4.20$ for REO, and ${\geq}4.15$ for BPIV. These results indicate that UVC irradiation using UVivatec was very effective and robust in inactivating all the viruses tested.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.2
• /
• pp.119-127
• /
• 2015

To date, detection of microbial populations in dairy products has been performed using culture media, which is a time-consuming and laborious method. The recently developed chromogenic media could be more rapid and specific than classical culture media. However, the newly developed molecular-based technology can detect microbial populations with greater rapidity and sensitivity than the classical method involving culture media and chromogenic media. This molecular-based technology could provide various options for monitoring the characterization of different states of bacteria and cells. Thus, it could help upgrade the processing system of the dairy industry so as to maintain the safety and quality of dairy foods. Among the various newly developed molecular-based technologies, flow cytometry can potentially be used for monitoring microbiological populations in the dairy industry if official international standards are available for this purpose. When omics technology would have biomarker identification, it could be regarded as the rapid and sensitive analytical methods. Methods based on PCR, which has become a basic technique in microbiological research, can be developed and validated as alternative methods for quantification of dairy microorganisms. This review discusses methods for monitoring microbiological populations in dairy foods and the limitations of these studies, as well as the need for further research on such methods in the dairy industry.

• Korean Journal of Agricultural Science
• /
• v.31 no.1
• /
• pp.53-75
• /
• 2004

This study is aimed at identifying the national economic value of the irrigation facilities by reviewing the existing papers on economic values of the irrigation facilities and presenting current status of dual O & M problems of the irrigation facilities. This study suggested the unified O & M system rather than continuing the existing dual O & M system of irrigation facilities based on the surveyed results of the activities of irrigation fraternities in Chungnam Province. The findings and proposals for the successful unified and mono O & M system of the irrigation facilities are as follows: (1) Total number of irrigation facilities in the nation accounts for 67,582, while the total length of irrigation and drainage canals amounted to about 174,259km. On account of the total length of structural canals was estimated at 31%, much losses of water and much O & M costs have been inevitable for the full irrigation rice culture. In spite of the past heavy investment for irrigation facilities, the ratio of rain-fed and partially irrigated paddy fields accounts for 23% in 2003. Both Korea Agricultural and Rural Infrastructure Corporation (KARICO) and the city and Gun Governments have managed the irrigation facilities separately by irrigation fraternities. The KARICO have commanded 59% of irrigation paddy area with 18% of the total irrigation facilities, while the city and Gun governments covered 41% of irrigation paddy area with 82% of the existing number of irrigation facilities representing small and medium scale. (2) The 1999 demand prices of irrigation water per ton expressed in 2000 constant market price was estimated at 388 won, the supply price was amounted to 184 won per ton. Considering the supply and demand curve of the irrigation water, the existing irrigation facilities could not satisfy the demand of irrigation water. (3) In 1999, total present added value of the irrigation facilities during the economic life accounted for 48 trillion won, while total supply cost was 44.7 trillion won. The marginal benefit and cost ratio of irrigation water was 1.08. (4) The total O & M cost per year amounting to 681.1 billion won have been required to maintain and repair the existing irrigation facilities in Korea. For the successful unified O & M of irrigation facilities covering whole irrigated paddy field in Korea, 950 billion won of O & M costs are required to keep up the marginal benefit of irrigation water as 2,800 billion won per year. The total O & M cost as 950 billion won should be allocated 40%, 380 billion won for O & M costs of irrigation facilities and 60%, 570 billion won for improvement of irrigation facilities. (5) The study investigated and reviewed the present O & M status of the irrigation facilities by small and medium irrigation fraternities. Most of the farmers belong to the irrigation fraternities preferred not only unified O & M but also KARICO take-over of the whole O & M activities of the irrigation facilities. The prevailing O & M cost per 10a expended by the Corporation was amounted to 104,890 won, while that of city and Gun governments was only amounted to 4,600 won per 10a. regarding the small amount of O & M cost expended by city and Gun governments, it is evident that the existing irrigation system have been managed ineffectively and deteriorated the facilities comparing that of KARICO. In conclusion, the Government could not satisfied the demand of irrigation water by suppling water with existing irrigation facilities. Therefore new additional investment and financial support for irrigation water development should be made to convert rain-fed and partially irrigated paddy fields into fully irrigated ones. The operation and maintenance cost should be supported to keep the marginal values of rice production of existing irrigation facilities in the national economy and to modernize the obsolete irrigation facilities. By unifying the existing dual O & M systems, all the farmers belong to the irrigated paddy fields have to be equally benefited and could be increased their farm income and be stabilized their rural lives.