• Fire Science and Engineering
• /
• v.21 no.3
• /
• pp.15-23
• /
• 2007

In the events of a fire in the residential building, highly flammable polyurethane foam sofa produce toxic smokes. In this type of fire, the residents of the building can be gotten into the difficulties of evacuating from the fire places or may be to death due to a lot of hot toxic gases. In this study, CFD simulations were carried out to study the effects of the openings of stairwell on the fire characteristics of fire room and stairwell. Also, analysis of fire hazard based on the tenability limits of fire and FED(fractional effective dose) was performed to evaluate the life safety of the residents of the building. In the fire room, maximum temperature was about $290^{\circ}C$, maximum CO concentration was about 4,740 ppm, and the time to incapacitation of residents in fire room was about t=144 s. In the stairwell, temperature and CO concentration in the condition of openings to be open were even lower than those in it to be closed. Time to the tenability limit with respect to smoke visibility in the stairwell with openings, which was open, was shorter than that of it without openings to be open. It has been shown from this study that opening the stairwell openings is able to decrease the fire hazards to the life safety in the multi-story residential building fire.

• Journal of the Korean Chemical Society
• /
• v.64 no.6
• /
• pp.327-333
• /
• 2020

Performance of a portable GC that can be utilized for the real time determination of volatile organic compounds in air was evaluated. It employs purified/compressed ambient air as the carrier gas eliminating the need for high pressure gas tanks. The compact system with dimensions of 35 × 26 × 15 ㎤ and weight of 5 kg is powered by either a 24 V DC external adapter or battery pack. Chromatograms of the mixture sample including benzene, toluene, ethylbenzene, and oxylene at concentrations of 1 ppmv and 20 ppmv represent a good reproducibility: 3.79% and 0.48% relative standard deviations (RSDs) for peak area variations; 0.40% and 0.08% RSDs for retention times. The method detection limit was 0.09 ppmv. A 30 m long, 0.28 mm I.D. column operated at an optimal condition yielded a peak capacity of 61 with good resolution for a 10 min isothermal analysis. The relative standard deviations (RSD) of the peak area variations and retention times during consecutive measurements over 27 h were less than 2.4%RSD and 0.5%RSD, respectively. Thus, this instrument makes it suitable for continuous and field analysis of low-concentration VOC mixtures in the indoor/outdoor environment as well as the spillage accident of hazardous chemicals.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.06a
• /
• pp.207-208
• /
• 2017

최근 보급되는 스마트 디바이스들은 실외뿐만 아니라 실내의 위치를 측정할 수 있는 기술들을 제공하고 있다. 실외 위치 측위 같은 경우는 기존의 GPS(Global Positioning System)를 사용하는 것이 일반적이지만, 실내 위치 측위는 기존의 GPS 방법으로는 한계가 있어 다양한 새로운 방법들이 연구 중에 있다. 그 중 가장 대표적인 방법은 BLE(Bluetooth Low Energy) 기반의 비콘(beacon)을 활용하는 것이다. 그러나 이 또한 추가적인 하드웨어가 필요할 뿐만 아니라 충전이 필요하다는 단점이 존재한다. 따라서 본 논문은 상기 단점들을 극할 수 있는 OCC(Optical Camera Communication)를 활용한 실내 위치 측위 기술을 고려한다. 특별히 공연장 내에서 관객들이 소지하고 있는 스마트 디바이스 카메라의 상대적인 위치정보를 획득하는 시스템을 제안한다. 이는 추가적인 하드웨어를 필요로 하지 않고 비동기식 접근이 가능하다는 장점이 있다. 본 논문에서 제안한 시스템을 통해 획득된 위치정보들은 촬영한 영상과 함께 저장되어 다양한 시점을 제공하는 응용데이터로 활용될 수 있을 것으로 기대한다.

• Composites Research
• /
• v.13 no.2
• /
• pp.81-90
• /
• 2000

For automotive applications, a sandwich sheet which was made of a 5182 aluminum alloy (AA5182) sheet and a polypropylene (PP) sheet, AA5182/PP/AA5182, has been developed. In order to evaluate its formability, the forming limit diagrams (FLD) of the 5182 aluminum alloy sheet with 0.2mm thickness and the sandwich sheet with 1.2mm thickness have been obtained based on the modified Marciniak-Kuczynski (M-K) theory. To account for the anisotropy of the sheet, Hill's 1948 yield function has been applied. The FLD of the sandwich sheet was predicted to be better than that of the AA5182 sheet, which was well confirmed by experiments.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.29-33
• /
• 2005

In the fuel of the solid fuel ramjet there are metal particles in order to improve the Isp like as solid rocket propellants. Because of the short combustion residence time these metallized fuels have low combustion efficiencies. Therefore it is necessary to increase the combustion efficiency and the inlet air temperature does an important role to this. The effect of the inlet air temperature to the performance is investigated through the semi-empirical method by adopting the experimental combustion efficiency. There are two factors to affect the inlet temperature, free stream temperature and the flight Mach number.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.25-31
• /
• 2004

This paper describes a new vibration-suppression technique for flexible cantilevered structures by using a pipe containing an internal flow. The stability and dynamic response are analyzed based on the finite element method. The flutter limit and optimum stabilizing fluid velocity are determined in root locus diagrams. The impulse responses of the system are studied by the mode superposition method to observe the damping rate of the motion. The stabilizing effect of an internal flow is demonstrated by impulse responses of the structures with and without an material damping. It is found that the response of the pipe with flow of liquid has a larger effect of, stabilizing than that with flow of gas.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.404-407
• /
• 2011

The fluidic thrust vector control using co-flowing coanda effect of secondary jet at the nozzle exit is a new concept for efficient thrust vectoring of supersonic jet exhausts. Flow visualization of the flow fields in previous studies have shown some pros and cons of the technique, however, most of the observations were somewhat limited as qualitative data. The present study was designed to evaluate the quantitative performance-characteristics of the thrust-vectoring technique utilizing coanda effects of the secondary jet. Details of design of the test device and calibration/data reduction procedure are provided.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.430-432
• /
• 2001

일반적으로 안과 의사들과 안경사 등을 포함하는 시각 관련 전문가들은 시력 피검자에 대한 굴절력 측정시 약 30% 이상의 오류율을 가진다고 한다. 이는 검사를 행하는 전문가의 비 숙련도에 기인한다기보다는 그만큼 시각 관련 측정이 유동적이고 민감해서 정확한 측정값을 얻어내는 것이 어렵다는 것을 말해주는 것이다. 만약 자동화된 시스템이 광학계로부터 나오는 영상을 이용하여 내부 처리를 거친 후 정확한 시각 측정치를 검사자에게 알려줄 수 있다면 잘못 측정되는 측정 횟수를 크게 줄일 수 있을 것이다. 본 연구는 형태학적 필터링(morphological filtering)과 그레이-레벨의 신호 강조(signal enhance) 기술들을 이용한 자동 시각 굴절력 측정 시스템을 개발하였다. 본 시스템에서는 광학계로부터 도출된 영상으로부터 첫째로 형태학적 필터링 처리를 행한다. 이 과정은 처리가 어려운 원 영상을 좀 더 다루기 쉬운 상태로 바꿔주는 역할을 하게 된다. 둘째는 일차 처리된 영상에 가해주는 그레이 수준 한계 기법을 통한 신호 강조 기법으로서 이는 영상의 그레이 값 분포가 다양함으로 인해서 발생되는 오차를 줄이기 위해서 사용된다. 그리하여 본 시스템은 정확한 측정값 도출이 어려운 시각 영상에 적용되어 효과적으로 오차를 줄임으로써 보다 효율적인 시각 측정을 가능하게 하였다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.1-7
• /
• 2010

Since subway fire disaster at Daegu, Korea smoke control system and passengers evacuation distance has been focused to reform. Existing smoke control facilities need to expand volume of ventilation capacity however, the complicate subway station structure can hardly react dispersion of smokes from massive subway cabin fire. Smoke flow at platform level move upward thought vertical stairway and passengers evacuation goes with same direction. The victims of evacuees from subway station fire mainly due to exposure of heat radiation and smoke. The study demonstration the effect of downward evacuates stairway system by separating evacuation route to smoke movement pass way including saving times of evacuation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.3
• /
• pp.784-795
• /
• 1995

This paper represents the results of the experiments of the three-dimensional flow and the aerodynamic loss caused by the three-dimensional flow within the plane bucket blades. To research the secondary flow and the aerodynamic loss, the large-scale plane bucket blade of lst-stage in the low pressure steam turbine is made of FRP. The detailed investigation of the secondary flow and the aerodynamic loss using 5-hole pressure probe within turbine cascade has been carried out in the low speed wind tunnel. The limiting streamlines of the suction and endwall surface have been visualized by the oil film method. The flow visualization of the secondary flow has been performed by the laser light sheet technique and image processing system. By using the method mentioned above, it is possible to observe the evolution of the pitchwise mass-averaged flow deviation angle and total pressure loss coefficient, the secondary flow, and the aerodynamic loss through the cascade.