• Title/Summary/Keyword: 유동한계

Search Result 311, Processing Time 0.03 seconds

The Transfer Characteristics of $CO_2$ Extinguishant According with the Location of Fire Plume (화재위치에 따른 $CO_2$소화제 전달특성)

  • 박찬수;최주석
    • Fire Science and Engineering
    • /
    • v.17 no.4
    • /
    • pp.28-35
    • /
    • 2003
  • To analyze the transfer characteristics of $CO_2$ extinguishant when extinguishant is injected into a closed space similar to a marine engine room, a numerical simulation was performed. Flow and Concentration fields are calculated according with the variation of the fire plume,s location. The results show that tile variation of fire plumes, location greatly effected on the flow patterns and the characteristics of $CO_2$ extinguishant transfer. In case of the fire plume located at left region of the 2nd floor center in the engine room consisted of first and second floor, The effects similar to the air curtain is found and cut off the mass transfer. In the characteristics with hight, the iso-concentration line below the extinguishable limit is formed in the left region of the 1st and 2nd floor center after the $CO_2$ extinguishant is completely injected. therefore I think that the results of this study are considered to arrange the $CO_2$ injection nozzles for the $CO_2$ fire fighting equipments.

Development of Hybrid/Dual Jet Combustor for a MGT (Part I: Experimental Study on Geometric Optimization) (마이크로 가스터빈용 하이브리드/이중 선회제트 연소기 개발 (Part I: 형상 최적화를 위한 실험연구))

  • Park, Tae-Joon;Hwang, Cheol-Hong;Lee, Kee-Man
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.17 no.5
    • /
    • pp.60-69
    • /
    • 2013
  • An optimum configuration of the hybrid/dual swirl jet combustor for a micro-gas turbine was investigated experimentally. Location of pilot nozzle, angle and direction of swirler vane were varied systematically as main parameters under the conditions of constant thermal load. The results showed that the variation in locations of inner fuel nozzle and pilot burner resulted in significant change in flame shape and swirl intensity due to the changes in recirculating flow pattern and minimum flow area near burner exit, in particular, with the significant reduction of CO emission near lean-flammability limit. In addition, it was observed that the co-swirl configuration produced less CO and NOx emissions compared to the counter-swirl configuration.

Control Effects of the Hydrodynamic Force of the Submerged NACA0018 arranging in a Row in a Uniform Stream (균일흐름 중에 놓인 병렬구조를 가진 몰수형 NACA0018의 간격변화가 유체력 제어효과에 미치는 영향)

  • Gim, Ok-Sok;Shon, Chang-Bae;Lee, Gyoung-Woo
    • Journal of Navigation and Port Research
    • /
    • v.34 no.5
    • /
    • pp.325-330
    • /
    • 2010
  • An open water rudder test was carried out to figure out the flow characteristics around a twin rudder at $Re=1.5{\times}10^4$. In the analysis, the unique characteristics of a twin rudder, which affects rudder forces, were explained. The analysis includes varying angles of attack from 10 to 30 degrees. In this paper, the measured results have been compared with each other to predict the performance characteristics of a twin rudder's 2-dimensional section by 2-frame grey level cross correlation PIV method. The length L=0.75C between upper and lower rudders could be defined as the critical length.

Analysis of two dimensional coefficient of permeability using Electrical logging and AMT Survey (전기검층과 전자탐사를 이용한 2차원 투수계수분포 특성 분석)

  • 고성일;이종호;이태종;박남윤;추석연
    • Proceedings of the Korean Society for Rock Mechanics Conference
    • /
    • 2003.03a
    • /
    • pp.113-120
    • /
    • 2003
  • The estimation of the coeff. of permeability is a major process that influenced in very large portion to the changing of gound water movement and estimation of the outflow’s quantity in the ground water movement modelling. To overcome the error caused by difficulty of the ground investigation for the hydraulic parameter’s estimation, in this paper, we study of correlation between electric resistivity and coeff. of permeability, and analyse of coeff. of permeability from electric resistivity. To accomplish this purpose, we carry out electrical logging, AMT survey as an in-situ test, and measure electric resistivity, porosity, permeability for the intact rock as a laboratory test. Based on the results of this research, it can be applied that estimation of the coeff. of permeability using electrical logging and AMT survey is a effective method for the impossible area of the ground investigation caused by geographical condition and petition.

  • PDF

Distributors' Preference for the Flextime System (유통업체 종사자의 유동근무제에 대한 선호성향에 대한 연구)

  • Lee, Won-Haeng
    • Journal of Distribution Science
    • /
    • v.10 no.4
    • /
    • pp.13-20
    • /
    • 2012
  • The "flextime" system, which was initially designed to maintain a balance between work and personal life, has recently received much attention as an alternative form of work, enabling employees to fully exert their creativity. Most studies show that the effects of flextime on performance, productivity, attitude toward the organization, absenteeism, and turnover differ between managerial and non-managerial workers. This suggests that workers' personal characteristics affect their preference for flextime by directly or indirectly influencing its result variables. As most Korean companies have not adopted the flextime system, little research has been conducted on it in Korea. Recently, Korean companies have been discussing flextime as one of several measures for enhancing international competitiveness. Therefore, this study aims to offer a theoretical framework for the introduction of the system by analyzing the effects of the precedent factors on the preference for flextime. Though not statistically significant, a higher preference for flextime is noted among workers over the age of 36. Older workers usually are more conservative and less adaptable to change but here the older Korean workers may be anxious and resistant. Additional research on workers in different types of businesses using improved research methods will lead to more meaningful results. Married workers display a lower preference to flextime than single workers. In Korea, the current atmosphere focused on a happy home encourages married workers to prefer regular work hours, enabling them to go to and from work on a regular schedule. This means that normal working hours, from morning to evening, are preferred as it is the most suitable system for families. However, this is not so in the case of single workers. Unmarried singles tend to prefer flextime for investing in self-development toward future prosperity, over the benefits of regular working-hours. Flextime is designed to meet their needs to some extent as it is helpful in maintaining a balance between work life and self-development. If flextime is selected, workers can spend mornings on self-development and work in the afternoons. Therefore, when flextime is introduced in Korea, it would be desirable to start with unmarried workers, to increase corporate creativity and productivity and develop individual potential. In particular, when the five-day workweek, the main concern for companies and labor unions, is adopted, synergy with flextime could be expected and a gradual implementation of flextime will be effective. Gender difference shows similar results to marital status with male workers displaying a higher preference for flextime. It is inferred that male workers' attitudes toward flextime are more favorable than female workers' because flextime enables self-development and work life to coexist. A relatively weak, though statistically significant, correlation exists between control position and flextime preference with inner-control-oriented workers displaying favorable attitudes toward flextime. Generally, inner-control-oriented workers tend to attribute the consequences caused by any person or partner relationship to themselves. Thus, when a new system is introduced they are likely to have less reluctance and fear than outer-control-oriented workers, because they think it is important to deal with the new system. A weak but slight correlation exists between the desire for achievement and flextime preference. People who have a higher desire for achievement are willing to consider the new system, especially if significant success is reasonably expected. This result is derived from a reasonable judgment that flextime offers an individual the time for self-development while the organization benefits from the resulting creativity and performance enhancements. Although not the primary analysis, a high correlation is found between control position and the desire for achievement, which is consistent with the results of previous research. The regression analysis not only supports the preceding ANOVA and correlation analysis but also shows the existence of a causal relationship. Married workers have a weak preference for flextime, which is consistent with the results of the preceding ANOVA. Relative to men, women have a weak preference for flextime. No statistically significant correlation was noticed for age. Inner-control-oriented workers prefer flextime more than outer-control-oriented workers as the former view the consequences of change to be their own responsibility. However, the preference for flextime seems to be weak. As expected, people with a higher desire for achievement have a stronger preference for flextime, presumably because the greater the desire for achievement, the stronger the spirit of challenging an uncertain future. No significant correlation exists between job satisfaction and flextime preference.

  • PDF

Improvement of the detection limit of rapid detection kit for Salmonella Typhimurium using image analysis system (이미지 분석을 이용한 살모넬라 신속 진단키트의 측정감도 향상)

  • Lee, Sangdae;Kim, Giyoung;Park, Saet-Byeol;Moon, Ji-Hea
    • Korean Journal of Agricultural Science
    • /
    • v.39 no.3
    • /
    • pp.421-425
    • /
    • 2012
  • The objective of this study was to improve the detection limit of rapid detection kit for Salmonella Typhimurium by image analysis system. The rapid detection kit was comprised of four elements: sample pad, conjugate pad, nitrocellulose pad and absorbent pad. Gold nanoparticle and Salmonella antibody were used as a tag and a receptor. Salmonella antibody and goat rabbit IgG antibody were used as test and control lines on nitrocellulose membrane. The color intensity of test line began to increase from $10^5CFU/mL$ of Salmonella sample. A multiple linear regression analysis was employed to explain the relationship between predicted and measured number of Salmonella cells. The developed model could successfully predict the cell number of Salmonella with validation against extra-experimental result.

Numerical Modeling of Ebb-Dominant Tidal Flow in the Mokpo Coastal Zone (목포해역 낙조류 우세현상의 수치모의)

  • Jung, Tae-Sung;Choi, Jong-Hwa
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.22 no.5
    • /
    • pp.333-343
    • /
    • 2010
  • In Mokpo coastal zone, the characteristics showing ebb-dominant tidal flow was confirmed by analysis of observed tide and tidal currents, Physical factors occurring ebb-dominant flow were reviewed. Influence of critical depth for drying, bottom shear stress, coastal reclamation, tidal amplitude, nonlinear tide, and eddy viscosity on the change of ebb-dominant flow was investigated by applying a two-dimensional circulation model. The simulation results for a variety of conditions showed that eddy viscosity and critical depth for drying does little or no impact on the generation of asymmetric flow. Strong bottom friction stress makes ebb-dominant flow clearly. Change of tidal flat into land swells ebb- dominant flow, and change of tidal flat into sea disappears ebb-dominant flow. Nonlinear tides play a decisive role in the generation of asymmetrical tidal flow. Non-linear tides should be included in the open boundary conditions of hydrodynamic modeling in the Mokpo coastal zone.

Application of Probabilistic Risk Analysis for Profitability-Evaluation of Apartment Reconstruction Projects (아파트 재건축사업의 수익성평가에 대한 확률적 위험도 분석 모형 적용방안)

  • Woo, Kwang-Min;Lee, Hak-Ki
    • Korean Journal of Construction Engineering and Management
    • /
    • v.7 no.5
    • /
    • pp.167-176
    • /
    • 2006
  • It was found that Korean Standard of Estimate which has been used as the only basis of cost estimate of public construction projects had some side effects such as jerry-build construction and over-estimation because it failed to reflect the current price and the state-of-the-art construction methods in a changing construction environment. Therefore, the government decided to gradually introduce historical construction cost into cost estimate of public construction projects from 2004. This paper presents analytic criteria and a process model for deducing more current and reasonable historical construction cost for contract items from not only previous contract prices but also all of the other bid prices that were not contracted. The procedure of estimating actual unit cost proposed in this paper focuses on the removal of abnormal values including strategically too low or high prices and the time correction. In addition, basic research is conducted for the correction of actual unit cost through the analysis of fluctuation of bid price depending on bidding types and rates of successful bid. It is anticipated that the effective use of the proposed process model for estimating actual unit cost would make the cost estimation more current and reasonable.

Development of Profitability-forecasting Model for Apartment Reconstruction Projects using the Probabilistic Risk Analysis (확률적 위험도 분석 모형을 이용한 아파트 재건축사업의 수익성예측모델 개발)

  • Woo, Kwang-Min;Lee, Hak-Ki
    • Proceedings of the Korean Institute Of Construction Engineering and Management
    • /
    • 2007.11a
    • /
    • pp.54-59
    • /
    • 2007
  • Recently, Apartment Reconstruction Projects are performing only with the basis of profitability without establishing either certain criteria or standard guideline. In addition, the profitability information contained in a disposal plan tends to be considered as a fixed value, and it is frequently changeable because reconstruction projects have such a long time to complete and many participants with respective interests. As mentioned above, the new approach needs to be developed which covers the limitation of the unvaried one. Consequently, this study focuses on the probability approach considering not only variances that affect the profit, but the relationship between profit and risk, and then is modeling. This study is anticipated to improve the reliability and accuracy of expected value as well as apply to the decision making criteria quantitively about potentially hidden risks in that projects.

  • PDF

Applicability Evaluation of Using Logarithmic velocity law for Assessing Local Shear Stress in Straight and Meandering River Channel (직선 및 사행 하천에서의 대수법칙를 이용한 국부 소류력 산정 적용성 검토)

  • Kim, Jong Min;Kim, Dong Su;Son, Geun Soo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.172-172
    • /
    • 2015
  • 하천에서 발생하는 소류력은 하상 변동을 발생시키기 때문에 주변 구조물이나 하천의 흐름특성 등을 변화시키게 되며, 유사이송, 침식 및 퇴적, 유동해석 등에 매우 중요한 하천 계수이다. 하천에서 소류력의 직접 측정은 매우 어려워 직접 측정 대신 하천경사 및 동수반경을 기반한 단면 평균소류력 산정 공식을 일반적으로 이용한다. 그러나, 이러한 방식은 상세한 유사이송, 세굴 등의 해석에는 한계가 있기 때문에 국부적인 소류력이 필요하다. 실내 실험에서는 프레스톤게이지를 활용한 직접 측정이나, 난류측정을 통한 레이놀즈 분포를 외삽하여 단면에서 국부적인 소류력을 측정하는 방식이 사용되어 왔다. 반면, 실제 하천에서는 국부 소류력 직접측정 및 난류 산정이 거의 불가능하거나 비효율적이므로 대안으로 하천의 연직유속분포에 대수분포를 적용하여 소류력을 추정하는 간접적인 방법이 제시되어 왔다. 일부 실내실험에서 대수법칙을 통한 소류력 산정 방식은 직접 측정을 통해 검증한 바가 있으나 실제 하천은 난류의 공간 시간적 스케일이 실내 규모와 상이하여 국부 소류력에 영향을 미칠 수 있어 이러한 검증결과를 현장 적용하기에는 한계가 있다. 본 연구에서는 실제 규모 하천에서 대수법칙을 활용한 국부 소류력 산정 결과와 레이놀즈 응력의 연직분포 측정을 통해 산정한 값과 비교하여 대수법칙 활용 소류력 산정 방식의 적용성을 검토하였다. 실험은 중소규모의 하천을 재현한 한국건설기술연구원 안동하천실험센터 직선(A1) 및 사행(A2) 하천의 유속측정을 수행하였으며, 유속 측정에는 정밀도가 높으나 실내에서 주로 사용된 초음파지점유속계(Micro ADV)를 현장에 설치하여 사용하였다. ADV의 관측 시간은 90초이며, 직선수로에서는 횡방향으로 25 cm 간격, 수심방향으로는 5 ~ 10 cm 간격으로 측정하였고, 사행수로는 횡방향으로 50 cm 간격, 수심방향 5 ~ 10 cm 간격으로 측정을 수행하였다. 실험결과 대수법칙과 레이놀즈 분포로부터 산정된 국부 소류력은 사행과 직선 모두 상당한 이격을 보였다.

  • PDF